Apdirbimo centras

BIESSE ROVER A 3.30

Gamybos metai: 2017, Sąlyga: visiškai atnaujintas (naudotas), Funktionen und Vorteile: • Verarbeitung von bis zu 30 Stück/Minute • Einstellbare Schälentiefe durch das von ABL patentierte Schälverfahren • Selbstanpassung an verschiedene Obstformen/-sorten • Hohe Ausbeute: ab 50% bei komplett geschältem Obst • Zuverlässige und robuste Leistung für industrielle und nicht-industrielle Anwendungen Nlsdspv Uz Njpfx Aduoi • Maximale Produktivität bei gleichzeitiger Senkung der Produktionskosten Die OP30 ist eine halbautomatische Schälmaschine für Zitrusfrüchte (Orangen & Grapefruits), Kiwis und Mangos. Die Maschine kann zum Schälen einer Obstsortenart gleichzeitig oder auch zwei verschiedenen Sorten verwendet werden, da sie mit zwei Schälköpfen ausgestattet ist. Bei der Verarbeitung von Zitrusfrüchten oder Kiwis erreicht die Maschine eine Leistung von 30 Früchten/Minute; bei Mangos reduziert sich die Geschwindigkeit auf 24 Früchte/Minute. Das Obst wird manuell von einem Bediener in die Zuführbecher eingelegt; beim Schälen von Zitrusfrüchten ist zudem eine Entkernungsoption verfügbar. Zwei selbstzentrierende Hände positionieren und übergeben die Frucht an zwei Spindeln, die die Früchte drehen, um das Schälen zu ermöglichen. Der von ABL patentierte Schälkopf führt den Schälschritt sanft der Fruchtform und -größe folgend aus, wobei die Schälentiefe auch während des Betriebs eingestellt werden kann. Nach dem Schälen entfernen zwei Messer die beiden Enden (nicht bei Mango) und geben die Frucht anschließend an das Band für geschälte Früchte ab. Seriennummer: 201, Baujahr: 2017, Gewicht: 1.550 kg, 415 V, 50 Hz, 4,0 kW, Gesamtmaße: 2.650 mm x 1.700 mm x 2.100 mm. Wir verfügen über drei Maschinen. Alle wurden überholt und mit neuer SPS sowie Elektronik ausgestattet.

Sąlyga: labai geros būklės (naudotas), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following processing operations: Tenoning / finger jointing / drilling Mortising / milling / 4/5-axis profiling. Technical specifications: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Nodpfx Ajirmyqsduoli Longitudinal (X) axis: 1,800 / 2,200 mm Transverse (Y) axis: 1,300 mm Vertical (Z) axis: 650 mm Clamping table length: 1,400 / 1,800 mm Single axis: unlimited C-axis: +/- 180°

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Nlsdpsi Hpk Uofx Aduei 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: naujas, Gamybos metai: 2025, The CNC 2040 SPECIAL milling plotter is a precision machine built in Poland, designed for machining a variety of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (acrylic glass, PVC, HPL, etc.), composites (Dibond, carbon fiber, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is made entirely of high-quality steel. During the manufacturing process, all components undergo specialized heat treatment. WORKING AREA: The working area of our CNC machine is 2100 x 4100 mm, and the entire worktable, which is manufactured using T-slot technology, also measures 2100 x 4100 mm. Z-AXIS TRAVEL AND GANTRY CLEARANCE: Njdpjin Uilefx Adusli The standard Z-axis travel is 200 mm, with an option to increase it to 400 mm upon request. DRIVES: Our plotters are equipped with high-resolution, high-power digital drives, ensuring robust acceleration and speed in all directions. The X and Y axes utilize classic, proven helical racks for durability and precision, while the Z axis is driven by a high-grade ball screw. All axes move on linear guide rails. SPINDLE: The cutting tool is driven by a powerful, liquid-cooled, durable, high-class brushless spindle. The spindle features high-quality machine bearings, which are very quiet and offer above-average durability. Spindle speed ranges from 6,000 to 24,000 RPM. Power is provided by a frequency inverter with higher output than the spindle itself, preventing speed drop under heavy load. SOFTWARE: The machine comes with the latest version of appropriate CAD/CAM software. The software enables quick, easy design of components, which are then converted into G-code. It is also possible to import existing files from other programs. CONTROL: The machine is operated via a controller with its own processor and RAM, ensuring stable and reliable operation. The machine’s controller supports active vector analysis, providing smooth machine motion and minimal processing errors. The controller features a resume function after power loss, so there is no need to reinitialize programs. Its built-in memory allows machine operation without reloading programs for every job. Optional extras: * Vacuum table with Busch or Becker pump * Chip extraction system * Oil mist lubrication * Custom table size available

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, SMELT professional coating line LED / All machines are used and still in good working condition. Nlsdpopyg Itofx Adusi

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Njdpfxod Nuu He Adusli Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 278 h, Max. workpiece size for trimming X = 3620 mm Maximum travel: X = 3865 mm Minimum room height: 3.20 m Processing in Y and Z Y = 1600 mm; Maximum panel width: 2000 mm Maximum workpiece height: 300 mm Measured from top edge of vacuum cup: 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE HIGH-SPEED MILLING Control system Siemens Industrial PC control Handheld control device for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0 - 24,000 rpm, stepless adjustment Cardanically mounted; C-axis rotatable +/- 360°, A-axis rotatable +/- 180° Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 Pick-Up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X-direction, 6 in Y-direction, 32 mm pitch n(max.) 1,000–5,710 rpm, stepless adjustment 6 horizontal spindles 2 double-drilling spindles in X-direction 1 double-drilling spindle in Y-direction including saw unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1,000–7,330 rpm, stepless adjustment MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X-direction Display and positioning of consoles and suction cups via the program 2 lateral stops at field A and D, 2 large-area pushbuttons for clamping and releasing workpieces, 2 tape measures for positioning consoles in X, referring to stop at field A/D, tape measure indicators for suction cups at every console in Y, referring to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, one stop per console and one stop laterally in X-direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel), automatically moves in X-direction Mobile tool changer 7886, single-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-Up system installed on the gantry, pneumatically operated Max. tool diameter: Ø 350 mm Tool changer 7892, 16-position linear Pick-Up VACUUM PUMP 140 m³/h dry-running LED lamp for the processing area. SAFETY OPTIONS Safety enclosure according to CE standard Safety fence on the side and rear Nlsdoxfaf Uspfx Aduoi EQUIPMENT VARIANTS AND ACCESSORY LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Max. 5 frame clamping elements can be controlled simultaneously per module. Simultaneous opening/closing of connected frame clamping elements, incl. foot pedal for activation, max. 2 pcs per field A and D orderable. OPTIONAL: LASER – laser pointer Consisting of two laser pointers for positioning the vacuum cups.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. Nlodpemgc I Nsfx Aduei UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Ekstruuderiai ir sraigtiniai aliejaus presai skirtos sojų perdirbimui, aliejaus ir sojų išspaudų gavimui. Yra du ekstruuderiai ir du presai. Vienas ekstruuderis ir vienas presas dirba kartu sudarydami presavimo liniją. Preso variklio galia – 22 kW, ekstruuderio – 55 kW. Vienos linijos našumas – 500–800 kg/val. Kaina nurodyta už vieną liniją (ekstruuderis + presas). Nljdpfx Ajtxinajduei

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 005521, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Nedpfxevctlgj Adujli Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool holders: 24