Linija durų staktoms (rėmams) - CNC

MASTERWOOD + AMS Multitec + Teknomat 3000

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Nwedpowu Tu Djfx Agioc Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Nodoh A Sfdjpfx Agiowc Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: naudotas, Gamybos metai: 2009, max. workpiece length 4500 mm Milling spindle: 1 unit Main motor: 20 kW Control system: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping tables, each 2280 mm ----- Workpiece length: 200 – 4,500 mm Machining of workpieces longer than 2,700 mm is carried out using a shuttle cycle. Main spindle 1: ----- Motor with brake, 20 kW HSK 63F Electronically adjustable speed: 2,000–18,000 rpm Maximum tool length from HSK 63 F reference surface: 290 mm With C-axis Tool magazine: ----- Number of slots: 30 Slot spacing: 100 mm Nsdpfewunwyox Agiewc Multi-spindle boring unit permanently installed ----- for horizontal and vertical drilling and milling without tool change ----- Price ex location Prices for Dismantling and loading onto customer truck Transport within Germany and abroad, reassembly, commissioning, and if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 inward and outward opening, with fitted drip rail Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift/slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivoting windows Corner joint: counter/dowel Technical data as per manufacturer – without guarantee! Detailed technical description available on request!

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Nwodewhmdfjpfx Agioc Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Nwsdpetvpiljfx Agioc

Sąlyga: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Nsdpjvu Hfqsfx Agiswc The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Sąlyga: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 94323, X ašies eiga: 3 060 mm, Y ašies eiga: 1 260 mm, Z ašies eigos atstumas: 150 mm, bendras aukštis: 2 400 mm, bendras ilgis: 4 400 mm, bendras plotis: 2 800 mm, bendras svoris: 3 130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice. X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Nwodpfxewpthts Agioc CNC control type: XP 600

Sąlyga: naujas, Gamybos metai: 2023, galia: 7 kW (9,52 AG), obliavimo plotis: 520 mm, peilių skaičius: 4, bendras svoris: 483 kg, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 120 mm, obliavimo aukštis: 240 mm, Thickness Planer SCM MiniMax s 52es Specification: • Condition - new • Manufacturer - SCM • Planer table width - 520 mm • Planer table length - 850 mm • Minimum workpiece thickness - 3 mm • Maximum workpiece thickness - 240 mm • Maximum planer cutting depth - 5 mm • Motor power - 7 kW • Supply voltage - 400 V • Cutterblock with 4 traditional knives • Cutterblock diameter - 120 mm • Cutterblock rotational speed - 5000 rpm • Max planing width - 520 mm Njdpfxjqu U Dno Agiewc • Feed speed - 5 / 8 / 12 / 18 m/min • Extraction port diameter - 120 mm • Net weight approx. 493 kg • Overall dimensions - 144 x 108 x 110 cm (W x L x H) Additional Information: • The machine is brand new • The displayed photos show the actual condition of the item for sale • Possibility to connect and test the machine on site • The price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz, Machine no.: 4/14242 Nodpfx Agob Auu Rjiswc Dust bag Location: Ex stock Bitburg

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Nwodpfx Aewka Upsgioc - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type carriage - Helical rack and pinion drive in X and Y axes, ball screw drive in Z axis for precise positioning - Machining dimensions: - Maximum support surface on nesting table: X = 3100 mm, Y = 1560 mm - Maximum travel ranges: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Maximum clearance height DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed - Vector speed: 128 m/min - X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drill unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shape arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternate CW/CCW - n(max): 1000 - 4400 rpm, infinitely variable - Mounting: M10 thread, locating seat 11 mm - Without tools, without collets - 6 horizontal spindles: - 2 twin drill spindles in X direction - 1 twin drill spindle in Y direction - Mounting: M10 thread, locating seat 11 mm - Max. drill length: 63 mm from mounting end - Without tools, without collets - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, infinitely variable - Maximum output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand rising locknut (for right-rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid) - Tool weight max. 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standards - Safety fence at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety by light barriers in the front machine area - Handheld remote control with the following functions: - Start/stop of machining programs - Machining cycle speed control - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1x machine license including: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication according to defined intervals - Additional sealing against dust via positive pressure in each guide carriage