Horizontalieji apdirbimo centrai su skersiniu stalu (mediena) pirkti naudotą (202)

Būklė: labai geros būklės (naudotas), CNC MACHINING CENTRE (POINT-TO-POINT) - 4 Axes Gantry-type construction Control unit: Power Control PC85 – Software: woodWOP Safety enclosure for the working head Fodpsr Ai Sqefx Ahropi Clamping table with no. 10 consoles (1500 mm) LASER system on X-axis for positioning the consoles and on the Y-axis for vacuum clamps Automatic tool changing system No. 2 rotary tool changers – magazine/tool positions: W8 (no. 8) + (no. 3) Maximum working area (X – Y – Z): 6000 mm x max. 1600 mm x 125 mm No. 4 working zones – 2 x vacuum pumps (capacity in m³/h) With separate electrical and control cabinet Total connected load (kW): 27.5 (approx.) WORKING UNITS (TOP): No. 21 independent vertical drilling spindles (High Speed 7500) No. 10 independent horizontal drilling spindles (6 in X-axis + 4 in Y-axis) Drilling head motor power (kW): 2.3 No. 1 vertical main spindle (milling unit) HSK 63: 9 kW No. 1 grooving saw unit, diameter 125 mm, N1 – swiveling 90° in X–Y direction

Būklė: labai geros būklės (naudotas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 axes (5 axes with FLEX 5) Gantry-type machine (X-axis moving) Control: Powertouch control (PC85), woodWOP software Safety enclosure for working head Clamping table with K-Table model consoles Console support arms (qty.): 8, Clamping table dimensions (mm): 1340 Automatic positioning of consoles (X-axis) LEDs indicate programmed vacuum cup positions (Y-axis) Workpiece clamping chuck, automatic tool change system – POWERCLAMP Carousel tool changer – magazine positions (number of tool places): 18 Maximum working range (X – Y – Z): 4000 mm x 1550 mm x 60 mm Maximum working range (X – Y – Z) for edgebanding: 4000 mm x 1500 mm x 60 mm Working area – vacuum pump (capacity in m³/h): 100/140 Chip conveyor With separate electrical and control cabinet Total connected load (52 A) Fedpfxjw Dc Nis Ahrepi WORKING UNITS (TOP): No. 17 independent vertical drilling spindles (High Speed 7500) No. 4 independent horizontal drilling spindles (2 on X axis + 2 on Y axis) Drilling head motor power (kW): 2.2 No. 1 vertical main spindle (milling unit) HSK 63 (kW: 15) Edgebanding unit Power Edge (Y-axis), edgebanding aggregate (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm: 0.4 – 3 Edge magazine for rolls (compartment no. 1) Pre-cutting station (cutting aggregate) No. 1 crossbeam aggregate (4 horizontal drilling spindles) No. 1 circular saw unit (diam. mm 125) Combi aggregate (flush milling–profile scraper)

Būklė: labai geros būklės (naudotas), 4-Axis CNC MACHINING CENTER for milling, drilling, cutting, and edge banding. C-Arm machine – safety tread mats at the front Fodeh Ucn Rjpfx Ahrjpi CNC control type PowerControl PC 85 (WoodWop software) 10 supports/consoles (1340 mm) LEDs indicate the programmed positions of vacuum clamps (Y-axis) Automatic tool changer system (carousel type with 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 No. 2 work areas – No. 2 vacuum pumps (capacity 100 m3/h) Chip conveyor for evacuating waste from the machining process Total connected load 27 kW Processing units (Top) No. 17 independent vertical drilling spindles (2.2 kW) No. 4 independent horizontal drilling spindles No. 1 vertical electrospindle HSK F63 (main spindle 11 kW) No. 1 grooving saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), edge banding aggregate (hot melt glue + pre-melter) Roll material (edging) thickness (min/max) mm 0.4 - 3 Edge magazine for rolls (2 positions)

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Setup table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X axis) Automatic positioning of the vacuum pods (Y axis) Automatic tool changer – 18 tool positions Fedpstixpujfx Ahropi Max. working area (X - Y - Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Including separate electrical cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw 90°, fixed, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-position roll magazine Combined aggregate (flush milling/profile scraper) Feed system with brush table 6 clamps for fixing and moving the panel on the machine’s vacuum pods Workpiece outfeed with motorized rollers + right-angle transfer system

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP Software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 Fpodoq Nmutjpfx Ahroi No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety foot mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool change system (carousel changer), 18 tool positions No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross unit with 4 horizontal drilling spindles + grooving saw (max. diameter mm 125) Edgebanding unit - hot melt glue applicator VT 100 No. 2 edge magazine for roll material OPTIONS: No. 1 adapter unit "FLEX 5" model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Būklė: labai geros būklės (naudotas), 5-Axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding ICOS CNC control unit (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel path mm 650) Maximum working area (X - Y - Z) during edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – mm 1400 LED positioning guides for vacuum suction cups (positioning along the Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Safety cabin for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type), No. 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter (mm) 200 Edge banding unit (PUR glue + Pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE BANDING UNIT No. 2 edge magazine for rolls Fjdpfew A Ruqex Ahropi OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Būklė: naudotas, Gamybos metai: 1991, X ašies eiga: 2 800 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 40 mm, bendras svoris: 4 000 kg, Cone: PS25 CNC control: Tria 6000 Fedpfxsua Arfe Ahrjpi Motor power: 5.5 kW 4 units available

Būklė: geras (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 0-201-76-6720, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 000 mm, Y ašies eiga: 1 550 mm, Z ašies eigos atstumas: 270 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, BMG311 VENTURE316XXL 6 m staklio 10 konsolių 6 atmušimai gale 6 atmušimai priekyje Vakuuminė sistema 2 x 90/108 m³/val. (50/60 Hz) LED pozicijos indikacinė sistema Fjdpfxjxw H Tco Ahropi 5 ašių pagrindinis velenas 10 kW Drive5C 5 ašių veleno programavimas WoodWop Apatinis diskinis keitiklis, 18 pozicijų Gręžimo galva, 21 velenas: Vertikaliai 17, Horizontaliai 4, Pasukamų 0/90° SAUGUMO TVORA KAIRĖJE MATOMUMO ELEMENTAS TVORAI DEŠINĖJE VENT.+BMG+B200/300 IKIŠTŲ ATLIEKŲ TRANSPORTERIS DEŠINĖJE POWERCLAMP PNEUMATIKOS PAKETAS K+AP STALUI PERFORMANCE PACK DRIVE5C LINEARINIS KEITIKLIS, 9 poz., BMG311 be FLEX5 MATUOKLIS ĮRANKIŲ KEITIMUI APDIRBIMO VELENO VIBRACIJŲ VIZUALIZACIJA collisionControl BRUKŠNINIO KODO NUSKAITYMO SISTEMA VENTURE 1D KODAMS HOMAG GROUP VALDYMO SISTEMA POWERTOUCH WOODWOP CAD PLUGINAS WOODWOP CAM PLUGINAS PROFESSIONAL MASCHINE WOODMOTION

Būklė: labai geros būklės (naudotas), 4-axis CNC-controlled MACHINING CENTER Gantry-style construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with beam supports. Number of supports: 6 (1400 mm) Automatic positioning of the supports (X-axis) Automatic positioning of vacuum suction cups (Y-axis) Automatic tool change system Fpodpfx Ahovxhnusrsi Disc-type tool changer – magazine capacity: 18 tool positions Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X-Y-Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X-Y-Z): 4250 x 2200 x 60 mm Chip conveyor Supplied with separate electrical and control cabinet Total connected load (kW): 28 WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for securing and moving panels to the machine’s vacuum pods 5 air tables for staging panels before processing Programmable vacuum system for lifting panels onto the conveyor belt Panel exit system with motorized conveyor belts

Būklė: geras (naudotas), Gamybos metai: 2012, Stalo ilgis mm 3.117 maks. ruošinio plotis mm 135 Darbinė zona Y kryptimi - horizontalus gręžimas mm 122 Darbinė zona Y kryptimi - horizontalus frezavimas (priekyje) mm 135 Darbinė zona Y kryptimi - horizontalus frezavimas (gale) mm 198 Praėjimo aukštis mm 180 Z ašies eiga mm 400 Greitasis poslinkis X kryptimi m/min 40 Greitasis poslinkis Y kryptimi m/min 80 Greitasis poslinkis Z kryptimi m/min 22,5 Frezos veleno galia (Sl/S6) kW 11 RAPID įrankių keitiklis vnt. 12 Vertikalių gręžimo veržlių vnt. 18 Horizontalių gręžimo veržlių vnt. 8 Fpodpeyk D Thsfx Ahrsi Grąžto sūkių dažnis rpm 6.000 maks. pjūklo disko skersmuo mm 300 Svoris kg 3.900 Mašina parduodama pagal kliento užsakymą, CNC galima demonstruoti pas klientą. Prieinama pagal susitarimą.

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastics, and aluminum. Machine in gantry design, with rack and pinion drive. Most recently used for timber staircase production. Year of manufacture: 1999 // RETROFIT in 2019 Technical Details: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB port, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis 540° (rotary axis), B-axis 196° (swivel axis, +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min, Z-axis 15 m/min, A-/B-axis 10,000 °/min Milling unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, variable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool changer system. - 2 chain tool magazines, each with 32 slots for tools up to D = 90 mm, with sorted storage up to max. 160 mm (requires three slots for this). Machine table: - 10 support tubes on linear guides with pneumatic release mechanism for quick positioning. - 2 control circuits for stops “raise / lower” - 2 control circuits for pneumatics “clamp / release” - 2 vacuum control circuits with pushbutton for clamping and automatic reset via CNC programming. - 2 step separation devices, stroke approx. 320 mm. - Various clamping fixtures for posts and winding strings. - 1 integrated chip conveyor in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum buildup. - Approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning workpieces. Other features: - Automatic central lubrication. - Control cabinet with climate control. - Projection laser. Work safety: - Moving protective cabin with safety bumpers. Refurbishments / Repairs in 2018 / 2019: - Conversion of rotary and swivel axes to a new generation of drives (digital). - New energy chains on Y- / X- / Z-axis. - Complete rewiring; all power and measuring cables renewed. Fpodpfxjvmpx Re Ahrei - All linear guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system upgrade to BWO Vektor 921, with V-CNC card and 256 MB NC memory. - Vacuum valves and hoses replaced. - 2 x tool magazines + tool grippers overhauled. - Swivel extraction system overhauled. Software: - It is possible to take over a current version of the Compass stair construction software. Compass is the leading provider for the planning and manufacturing of wooden staircases.

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Used machine MAKA PM 270 R 5-axis CNC machining center for processing wood, plastic, and aluminum. Machine with gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC Control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool diameter 60 mm / tool length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with fixture height 180 mm (vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / tool length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with fixture height 180 mm (vacuum cups) A-axis 540° (rotary axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling, with a 50° inclined head, max. power 12.5 kW, continuously adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool changer system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm, with sorted storage up to max. 160 mm (for which three positions are required). Machine table: - 10 support tubes on linear guides with pneumatic quick-release system for fast positioning. - 2 control circuits for stops "Raise / Lower" - 2 control circuits for sliding rail "Raise / Lower" - 2 control circuits for pneumatic "Clamp / Release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 integrated chip conveyor in the machine base for removal of chips and small waste up to approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! By arrangement, the system can be supplied including various tool holders. We would be pleased to provide you with a separate quotation for this. Fjdpfxsvmywqs Ahropi Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 liter capacity for rapid vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Stops “raise / lower” for positioning components. Miscellaneous: - Automatic central lubrication system. - Control cabinet with air conditioning unit. - Projection laser Occupational safety: - Traveling safety cabin with safety bumpers on the operator side.

Būklė: naudotas, Gamybos metai: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 Door processing center for machining interior doors (hardware routing, light cut-outs, peephole routing, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working areas: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y axis: 45 m/min. Z axis: 10 m/min. 1 piece universal milling unit SK40 With integrated A-swivel axis 190° (+/- 95°), in the X-axis direction for lock and hinge machining on both sides along the longitudinal edge of the door directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, stepless speed control from 1,000 – 17,100 rpm, tool holder SK40 for automatic tool change. 1 piece chain tool magazine with 24 slots, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, located at the unit’s output position. Maximum tool length 200 mm from spindle mounting. Milling spindle and 2 x magazine slots configured for the use of angle or measuring heads with torque support. Machine table with programmable width adjustment, as well as width measurement for edge processing to maintain consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically raisable and lowerable. 1 x longitudinal stop with pneumatic lift, mounted traveling on the unit, for positioning to door length and thickness. 4 pieces pneumatic stops, laterally swiveling, for doors with veneer/cover overhang up to max. 15 mm, as well as selectable height adjustment for changing stop heights for finished doors (single / double rebate doors). 2 vacuum clamping lines, each with 5 vacuum cups, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups are lowerable according to the workpiece door height. 1 vacuum pump approx. 128 m³/h suction capacity, with 250 liter buffer tank, for rapid vacuum build-up. Fpsdjv S Dn Djpfx Ahroi Automatic central lubrication, free-standing switch cabinet with climate unit. Work safety: bumpers on both sides of the gantry, lateral safety fence. Various tools and tool holders can be included by arrangement. The machine can be inspected in Hermaringen.

Būklė: geras (naudotas), Gamybos metai: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for processing wood and plastics. Gantry-type machine with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC Control BWO 920 for 5-axis processing. 10.4" LCD display 2 MB NC memory, movable control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm construction height (top edge of vacuum cup) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm construction height (top edge of vacuum cup) A-Axis 540° (rotary axis), B-Axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y: 45 m/min. Z-axis: 24 m/min. A-/B-Axis: 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1), 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool Magazine: - HSK-F63 tool interface for automatic tool changing system. - 1 drum magazine, horizontal, with 20 slots for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three slots required for this). Fpodpfevr A A Tox Ahroi Machine Table: - 10 support rails on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame, for removing chips and small offcuts up to max. approx. 100 x 100 x 100 mm. Vacuum Supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with tank. - Vacuum supports with various suction pads. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. Occupational Safety: - Moving protective cabin with safety bumpers on operator side. Repairs / Maintenance prior to delivery: - Maintenance newly performed. - Lamella curtain on gantry replaced. - Sliding window replaced. - Energy chain Y-axis replaced. - Energy chain Z-axis replaced. - Various cables and air hoses renewed.

Būklė: geras (naudotas), Gamybos metai: 2007, Darbo sritis apie 3600 x 1500 mm X ašies greitis 70 m/min Y ašies greitis 60 m/min Z ašies greitis 15 m/min Variklio veleno elektros tiekimas 8,5-13 kW Horizontalios gręžimo galvutės 6-8 Fpjdeyt H Imspfx Ahrsi Praėjimo aukštis apie 130 mm Z ašies eiga 240 mm Sumontuota galia 20-30 kW Svoris apie 3500 kg Vietos poreikis apie 7400 x 3500 mm Gręžimo agregatas: 12 reguliuojamų velenų bei 4 + 2 horizontalios ašys Pjūklas Vertikali frezavimo galvutė Interpoliacinė vektoriaus ašis Horizontali frezavimo galvutė Stalas „TVN“ su šešiais laikikliais, L=1500 mm Lazerių įranga siurbimo pozicijoms Interpoliacinė vektoriaus ašis Vakuuminis siurblys NC valdymas su PC-Office Grąžto apsukos reguliuojamos inverteriu Tiksli komplektacija pagal užklausą Duomenys pateikiami be garantijos Kaina nuo vietos, galime padėti su demontavimu (Pardavimas vykdomas kliento pavedimu)

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Return-Master 5920 grąžinimo sistema, 4 metų senumo. Aptarnauta aukščiausio lygio Dimpex serviso komandos. Tik rimti užklausimai! Fpsdpfx Aoyhpynjhroi

Būklė: naudotas, CNC apdirbimo centras BIESSE Rover C 6.50 CONF.2, 2007 metai Fpjdpfew Rpd Sox Ahrsi Darbo zona: apie 140 × 460 cm Staklių matmenys: 300 × 650 cm Svoris: apie 6 100 kg Dvi darbinės galvos Įrankių sandėlis: 22 pozicijos Vertikalūs gręžimo velenai: 28 vnt. Horizontalūs gręžimo velenai: 12 vnt. Kaina derinama, galima iškart. Kaina nurodyta be PVM.

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, The Format4 creator 950 in extensive equipment variants – your CNC machine for individual challenges in woodworking. Efficient CNC machining at a fair price is at the core of the creator machine series. All models come with attractive features utilizing cutting-edge CNC technology and can be individually configured to meet specific requirements. The creator 950 isn’t just a simple and safe entry point into the CNC world but also serves to relieve your CNC machining centers. Your advantages at a glance: • Concentrated CNC technology within just 5 m² of installation space • All-inclusive: 4-sided formatting as standard • Get started immediately: Maximum productivity without set-up times • No suction cup or console positioning required • Usable from interior fitting to room doors • Traditional top machining – simplest loading • Intuitive control via operator panel • Easy-to-understand software • Optimum extraction results • High-end equipment at the best price in every configuration • Cabinet processing with Lamello Clamex-P Options: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables at front and rear – roller table Fjdpfju Eg A Ujx Ahropi C198 Pick-up area for tool and aggregate change C200 4-position linear changer for aggregates C233 Crane transport bracket C490 F4design (incl. 3-axis PP) 800 E-learning F4Design Creator Working Area: Axis travel: X = 1475 mm (clamp) Y = 1550 mm Z = 225 mm Working field: X = 3500 mm (infinite) or 130 kg max load Y = 950 mm Z = 80 mm max workpiece height Equipped with: High-performance PC 24" LED color display Keyboard, mouse, and mouse pad 1 USB interface

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, mašinos/transporto priemonės numeris: 0-201-25-5219, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, X ašies eiga: 4 800 mm, Y ašies eiga: 1 400 mm, Įranga: sūkių greitis be galo kintamas, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Pasiūlymo pateikimas įpareigoja laiku atsiimti iki rugpjūčio pabaigos! Fjdpfx Aew Ekkkohrspi TECHNINĖ INFORMACIJA Važiavimo eiga Važiavimo eiga X ašimi: 4 800 mm Važiavimo eiga Y ašimi: 1 400 mm ĮRANGOS DETALĖS Elektros duomenys Maitinimo įtampa: 400 V Dažnis: 50 Hz Fazių skaičius: 3 Nominali srovė: 53 A Apsauga: 63 A Valdymo įtampa: 24 V Įėjimo srovės tipas: trifazė srovė ĮRANGA Apsisukimų skaičius reguliuojamas be pakopų Kraštų agregatas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: 0-250-15-0310, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 250 mm, Y ašies eiga: 1 300 mm, įrankių magazino lizdų skaičius: 9, greitas poslinkis X ašimi: 80 m/min, ruošinio skersmuo (maks.): 60 mm, TECHNINĖ INFORMACIJA Darbo eiga Eigos kelias X ašis: 6 250 mm Fsdpsxdw Tgsfx Ahrjpi Eigos kelias Y ašis: 1 300 mm Greitasis poslinkis Greitasis poslinkis X ašis: 80 m/min Greitasis poslinkis Y ašis: 60 m/min Greitasis poslinkis Z ašis: 20 m/min Kėlimo eiga X ašis: 8 360 mm Kėlimo eiga Y ašis: 2 015 mm Pagrindinio veleno variklio galia: 9 kW Kontroliuojamų ašių skaičius: 3 Gręžimo galvučių skaičius: 50 Maksimalus ruošinio skersmuo: 60 mm Įrankių pozicijos: 9 (8 pirmame įrankių žurnale, 1 antrame įrankių žurnale) STAKLIŲ DUOMENYS Sumontuota bendra galia: 18 kW Valdymo sistema: HOMATIC-200 Valdymo modelis: WOODWOP 7.0 Saugos standartas: CE žymėjimas ĮRANGA Dokumentacija / vadovas Sukimosi greitis reguliuojamas be pakopų Automatinis įrankių keitimas Vakuuminis siurblys Darbinis stalas su vakuuminėmis konsolinėmis atramomis Siurbimo elementai ruošiniui laikyti 1 frezavimo agregatas 2 gręžimo agregatai (po 25 gręžimo galvutes kiekviename) 2 pjovimo agregatai Pastaba: Įrankiai nėra pardavimo ir pristatymo apimtyje.

Būklė: naujas, Gamybos metai: 2026, Gręžimo ir kaiščių įkalimo staklės vienalaikiam gręžimui, klijavimui ir kaiščių įkalimui 32 mm sistemai su daugiašpindliniu gręžimo galvutėmis ir reguliuojamomis kaiščių stotelėmis. Trumpas pristatymas: Fpjdpfx Ahjdx Aw Norji • Universalios gręžimo ir kaiščių įkalimo staklės • Itin paprastas valdymas • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui • Papildomas pasirinktinai vertikalus gręžimo agregatas • Atpalaiduoja CNC apdirbimo centrus • Puikus papildymas nesting staklėms

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, X ašies eiga: 3 200 mm, Y ašies eiga: 1 300 mm, ašies skaičius: 21, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of suction traverse beams: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Fsdpjytr Rysfx Ahrjpi Total number of spindles: 21 Milling unit Number of axes: 3 Max. rotational speed: 24,000 rpm Motor power: 9 kW Tool turret Number of positions: 10 MACHINE DETAILS Total power consumption: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling tools are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side is missing). The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8174

Būklė: nepatikrintas (naudotas), Gamybos metai: 2005, Funkcionalumas: nepatikrintas, galia: 19 kW (25,83 AG), X ašies eiga: 4 175 mm, Y ašies eiga: 1 730 mm, ašies skaičius: 20, Įrankių bokštelio 1 įrankių stočių skaičius: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X direction: 2 Number of spindles for horizontal drilling in Y direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 Fpjdpsyttf Ssfx Ahrsi EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters and aggregates are not included in the scope of delivery. Safety guards are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, X ašies eiga: 4 175 mm, Y ašies eiga: 1 550 mm, ruošinio aukštis (maks.): 40 mm, ašies skaičius: 30, važiuojamoji greitis (maks.): 80 000 mm/min, TECHNICAL DETAILS X-Axis Travel: 4,175 mm Y-Axis Travel: 1,550 mm X-Axis Traverse Speed: 80 m/min Y-Axis Traverse Speed: 80 m/min Z-Axis Traverse Speed: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverses: 8 Spindles Number of Vertical Drilling Spindles: 20 Number of Horizontal Drilling Spindles (X-direction): 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Slots: 18 Tool Magazine 2 Number of Slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350 Fpedjyttcwspfx Ahrsi

Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: ab197, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 3 000 mm, sukimosi greitis (maks.): 24 000 aps./min, Įranga: dokumentacija / vadovas, BACCI MOD. DOUBLE JET 5+5 ašių apdirbimo centras - CE - 5+5 interpoliuotų ašių - 2 nepriklausomi darbo stalai - 3+3 pneumatiniai spaustuvai - 2 pakrovėjai - Maksimalus darbinis ilgis 3000 mm - 2 galvos (2+2 tipo) - 0-24000 aps./min - Osai valdiklis - Yaskawa pavaros - Pitagora programinė įranga - Spaustuvų padėties valdymo įrenginys X ir Y ašyse - Kabina - Serijos Nr. ab197 Fpsdox Rcm Ujpfx Ahrsi - Metai: 2016 - PILNA SU CE ATITIKTIES DEKLARACIJA