Horizontalios juostinės pjūklai – pusiau automatiniai – apvali pjovimo sritis 0–300 mm pirkti naudotą (125)

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €11,640 Leasing rate: €223.49 Saw frame: Pivoting frame Saw blade dimensions: 3270x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity 0° round: 300 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 420x200 mm Cutting capacity 45° round: 240 mm, square: 230 mm Cutting capacity 60° round: 170 mm, square: 170 mm Working height: 830 mm Length: 1650 mm Cjdpfx Agoynm S Ij Dsri Width: 1200 mm Height: 1900 mm Weight: 400 kg Hydraulic vice Lowering and raising of saw frame via hydraulic cylinder Rapid lowering Automatic rapid lowering and raising, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Dual safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vice closes; rapid hydraulic lowering of saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid raising of saw frame; stop of saw frame raising; vice opens OPTIONS: Adjustable clamping pressure for vice (R1) €403,-- Roller conveyors and saw bands on request

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €9,420 Leasing rate: €181.81 Saw frame: Swivel frame Saw blade dimensions: 2450x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity at 0° round: 220 mm Cutting capacity at 0° square: 200 mm Cutting capacity at 0° flat: 250x150 mm Cutting capacity at 45° round: 160 mm, square: 140 mm Cutting capacity at 60° round: 90 mm, square: 90 mm Working height: 800 mm Motor: 0.7 kW Length: 1,330 mm Width: 1,300 mm Height: 1,880 mm Weight: 350 kg Hydraulic vise Credpfx Ageynm R Do Dsi Descent and lifting of the saw frame via hydraulic cylinder Rapid descent Automatic rapid lowering and raising, controlled by position sensor Adjustable cutting pressure according to material cross-section and quality Dual safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; rapid hydraulic lowering of saw frame; saw band rotation and coolant pump start; lowering at working speed; end of cut; saw band rotation and coolant pump stop; rapid raising of saw frame; stop saw frame raising; vise opens OPTIONS: Adjustable clamping pressure of the vise (R1) €403,-- Roller conveyors and saw bands on request

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €12,680 Lease rate: €243.46 Saw frame: swivel frame Saw blade dimensions: 3120x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity at 0° round: 280 mm Csdpfx Agsynm She Djri Cutting capacity at 0° square: 240 mm Cutting capacity at 0° flat: 350x140 mm Cutting capacity at 45° round: 230 mm, square: 200 mm Cutting capacity at 60° round: 140 mm, square: 140 mm Cutting capacity at -45° round: 200 mm, square: 170 mm Working height: 830 mm Length: 1600 mm Width: 1550 mm Height: 1750 mm Weight: 460 kg Hydraulic vice Lowering and raising of the saw frame via hydraulic cylinder Rapid lowering Automatic rapid lowering and raising, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Dual safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vice closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at cutting speed; end of cut; blade rotation and coolant pump stop; rapid raising of the saw frame; saw frame raising stops; vice opens OPTIONS: Roller conveyors and saw blades available on request

Būklė: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Miter cutting range: From 45° left to 60° right Cedpfx Agjg S Ui Ae Dori Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415

Būklė: naujas, MACC 320 MS Semi-Automatic Bandsaw Condition: New "CE" Technical data sheet attached. Available for immediate delivery while stock lasts The core features of the machine (blade support rigidity, flywheel sizing, band guiding and tensioning system) have been meticulously engineered to prevent band fatigue, extend service life, and improve cutting accuracy and speed. Vertical rotation on an adjustable, backlash-free tapered roller bearing pivot. Band drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Flywheels optimally dimensioned. Robust band guides featuring sealed roller bearings and adjustable carbide guide plates. Band tensioning achieved by an electromechanical device equipped with blade rotation micro switch control. Safety device against accidents fitted on the flywheel cover, control handle, and blade. Cutting thickness: 1.2 mm Cutting range: 0° to 60° right Adjustable stop for repetitive cuts of the same length. 0.06 kW electric pump for band cooling Operation: Start the cutting cycle by pressing the start button, the machine: 1. Closes the vice and activates the band motor 2. Lowers the arm for cutting 3. Returns the arm to the starting position Credpfofibfaox Ag Doi 4. Stops the band motor 5. Opens the vice Manual cutting option available OPTIONAL ACCESSORIES: - SINGLE-PHASE motor 69 m/min - Speed variator from 20 to 90 m/min

Būklė: naujas, Berg & Schmid juostinio pjūklo staklės GBS 218 Eco AutoCut tinkamos įstrižiems pjūviams į kairę iki 60° Spaustukas su greito fiksavimo prietaisu Kietmetalio juostos vedlys užtikrina labai tikslų pjūvį Integruota juostos įtempimo kontrolė, elektrinė aušinimo automatika, staklių pagrindas 3 pakopų AutoCut sistema su rankine funkcija, variklis 400 V / 1,2 kW Codjyw Ta Sjpfx Ag Dori Svoris apie 240 kg, pjovimo greitis 30 + 70 m/min. į komplektą įeina 1 speciali pjūklo juosta 2455 x 27 x 0,90 mm Pjovimo sritys: 90° apskritas / kvadratinis / stačiakampis 220 / 210 / 230x185 mm 45° kairė apskritas / kvadratinis / stačiakampis 150 / 150 / 150x210 mm 60° kairė apskritas / kvadratinis / stačiakampis 90 / 90 / 90x100 mm

Būklė: naujas, Gamybos metai: 2026, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial worm gear motor - Automatic shut-off after cutting completion - Mechanical saw blade tensioning with electric blade breakage monitoring - Quick-release vice, adjustable - Hydraulic saw frame descent with rapid feed function (infinitely adjustable) - Electric coolant pump - Precision-ground carbide saw blade guides (adjustable) - Large-diameter round support table, rotates for mitre cuts, mitre angle display (scale) on operator side - Direct switching from manual to descent mode - Easily removable chip collection tray - Material stop 500 mm with scale Codpfx Aefg Eq Rog Dori - Incl. combination-tooth saw blade 4/6. Technical Data - Motor: Three-phase current 400 V, pole-changeable, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheel diameter: 300 mm - Cutting speed: 40/80 m/min - Vice clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Further accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT RANGE! REQUEST A QUOTE!

Būklė: naujas, Gamybos metai: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after cutting completion, saw arm returns to start position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precision-ground, carbide-tipped, adjustable saw band guides Electric coolant pump Manual blade tensioning with indicator, including electronic blade and cutting pressure monitoring Hydraulic vise (opening and closing) Swarf removal brush, driven Large, solid, round worktable, rotates for mitre cutting with integrated cutting channel; mitre angle adjustment manual, with scale readout Material stop 500 mm with scale Including saw band with combination toothing 4/6 Machine colour: - Saw frame RAL 7035 - Machine body RAL 7005 Main motor, 3-phase 400 V, frequency controlled 1.5 kW Saw band dimensions 2910 x 27 x 0.9 mm Flywheel diameter Ø 325 mm Cutting speed 20–120 m/min Vise opening width 320 mm Working height 760 mm Cutting range: At 0° = Round Ø 250 mm, Square 240 x 240 mm, Rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight 420 kg Additional accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) CANNOT FIND THE RIGHT MACHINE? Crjdpfx Agjcl Tc As Doi WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! CONTACT US FOR AN OFFER!

Būklė: naujas, Gamybos metai: 2026, Compact, fully automatic band saw (also mitre cuts up to 45°) Torsion-resistant, robust cast saw frame Crsdetpg Saepfx Ag Dji Powered chip removal brush High-performance industrial worm gear motor Automatic shut-off after cutting cycle is complete with subsequent raising of the saw frame to the stepless, preset frame home position Mechanical saw blade tensioning with electric blade breakage monitoring Minimum cut-off length 180 mm, smallest possible diameter 5 mm Feeding accuracy of 0.2 mm Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Includes combi-tooth saw blade 4/6 Machine colour: - Saw frame RAL 7035 - Machine body RAL 7005 12 months warranty for single-shift operation Motor: Three-phase, 400 V, pole-switchable (kW) 1.1/1.5 Saw blade dimensions (mm): 2720 x 27 x 0.9 Flywheels Ø (mm): 300 Cutting speed (m/min): 40 – 80 Clamping width (mm): 275 Working height (mm): 768 Dimensions: 2,220 x 1,650 x 1,730 mm Weight (kg): 495 DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORISED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Būklė: naujas, 1 brand new semi-automatic horizontal band saw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Credpfx Agjvyidme Dei Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Equipment / Special Features: • Semi-automatic operation • Hydraulic vice, actuated via foot pedal • Double mitre cuts via pivoting saw frame o The workpiece remains stationary! o No need to turn the material for mitre cuts! o High efficiency and significant time savings! • Fixed precision stops at 0°, 45°, and 60° to the left, and 45° to the right • Replaceable work table • Hydraulic vice, laterally adjustable to the left and right • Adjustable length stop (500 mm) for repeat cuts of identical length • The lowering of the saw arm is continuously variable by hydraulic system; after cutting, the arm raises automatically and the vice opens • Coolant system • Swarf brush • Swiveling control panel • Electrical safety switch for blade tension and blade guard • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Būklė: naujas, Electric voltage: 400 V Credsd R Uz Tjpfx Ag Dsi Frequency: 50 Hz Number of phases: 3 / 3 Ph Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Credjfn Andjpfx Ag Dji Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) Crodpfofgyicox Ag Doi · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total connected load: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal bandsaw, frequency inverter, hydraulic semi-automatic, type GBS 250 Super HA-I Easy • Mitre cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece – very quiet operation with minimal vibrations • Hydraulic vise, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vise and machine base casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball bearing turntable Semi-automatic operation sequence: 1. Clamp the material 2. Saw start 3. Rapid downfeed to material start, or cut immediately for serial cutting Cedpfxefgyh Ue Ag Dori 4. Switch off saw band 5. Raise the frame to just above the material 6. Open the vise

Būklė: naujas, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: - Saw frame, vise assembly, and base constructed from highly durable cast iron - Precision angle indicator on the cast iron structure - Electrical system (with fully identifiable wiring and 24V low voltage system) - IP 55 control lever for manual cycles (if applicable) - Rotating chip brush for cleaning the saw band - Quick-approach vise closure assembly Crodsfg E H Iepfx Ag Dji - Accurate end stops with settings for miter cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade, 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts order manual provided in user’s language SHARK 281 – manual operation model; SHARK 281 CCS – manual operation with automatic cutting via gravity head-feed. CCS (Cut Control System) with: A) Switch for manual/automatic cutting mode B) Adjustable cutting speed C) Hydraulic brake with tank D) End-stop for band shutoff CCS is also available as an option for previously manufactured machines. Vise with quick adjustment Hydraulic indicator for band tension Electric coolant pump for band cooling and lubrication, with accessible coolant tray above the machine base On models with pneumatic vise (MA), the vise is opened and closed via a manual valve (pedal control available as an option)

Būklė: naujas, Cutting diameter: 250 mm Credpoxaatbjfx Ag Dsi Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment/features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of saw frame lowering - Carbide saw blade guides - Hydraulic saw blade tensioning incl. digital value display - 2 saw blade speeds - 1 x bi-metal saw blade - Coolant system - 1 x angle stop - Swarf removal brush - Machine frame with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Būklė: naujas, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed. Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vise with quick-clamping device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubrication of the bandsaw blade. Chip removal brush. Adjustable precision stops for repeated cuts of equal length. Crodpefg E H Tjfx Ag Doi Machine designed for pallet truck transport. Bimetal bandsaw blade for solid and profiled material. Tools and operating manual.

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic-dynamic and manual operation. Equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Key features: - New centralized control console mounted on an articulated arm. - Low-voltage operating panel: polyester membrane keypad with thermoformed, raised buttons and activation control signal. - Display for: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time used for each cut * Saw band motor current draw * Saw blade tension * Saw blade speed * Numeric display of head position - IP55 manual cycle switch handle (24 V). - Complete programming of all special cutting cycles. - Capability to define additional special cutting cycles for specific applications. - Latest-generation high-performance, energy-efficient hydraulic control unit. - Rotating table (mounted on 420 mm roller bearing with preloaded thrust bearing). Cjdpfsfg E H Usx Ag Deri - Double band speed (40/80 m/min) with control system. - Prepared for installation of an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit the cut material. - Clamping device laterally movable to left and right, with quick-release vice. - Manual band tension control with display via electronic transducer on screen. - Base frame designed to retain all coolant, even for maximum angle cuts. - Coolant tray (equipped with electric pump for the lubrication and cooling of the saw blade), and chip drawer (can be replaced by a chip conveyor – see special accessories), both integrated in the base frame. - Prepared for installation of a minimum quantity lubrication set for the saw blade (optional, in addition to standard coolant lubrication with emulsion oil). - Chip removal brush. - Machine designed for pallet truck transportation. - Adjustable length stop for repetitive cuts. - Material support arm with roller for attaching the loading table. - Bi-metal saw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting range, round: 280 mm Saw blade dimensions (LxWxT): 340 x 27 x 0.9 mm Cutting range at 45°: 230 mm Cutting range, rectangular: 350 x 220 mm Cutting range at 45° mitre flat: 240 x 180 mm Cutting speed: 20-100 m/min Weight approx.: 595 kg Motor: 1.5 kW KK Kletzer UBS-S 280 Semi-Automatic Bandsaw High-Performance Structural Steel Machine Standard Equipment: - M42 bimetal saw blade - *Variable speed - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Hydraulic vice - Hydraulic bow - Saw blade tensioning device - Pendant control Csdpfx Aerz Uzfog Djri - Mitre vice

Būklė: naujas, Saw frame: Swivel frame Saw band dimensions: 2730 x 27 x 0.9 mm Band speed: 35/70 m/min Cutting capacity round: 230 mm Cutting capacity square: 230 mm Cutting capacity rectangular: 320 x 130 mm Dimensions (LxWxH): 1350 x 770 x 1300 mm Working height: 760 mm Coolant pump motor: 0.12 kW Weight approx.: 525 kg Cutting capacity 45°: round 210 mm, square 180 mm, rectangular 230 x 160 mm Cutting capacity 60°: round 120 mm, square 100 mm, rectangular 120 x 100 mm Cutting capacity -45°: round 180 mm, square 150 mm, rectangular 230 x 100 mm Motor: 1.3 kW KK Kletzer 230DG Hydraulic Double Mitre Head Bandsaw. Heavy-duty construction from structural steel. Standard accessories: - M42 bimetal saw blade Csdpfx Agjrzx Dlo Deri - Variable speed - Inverter control unit - Coolant system - Automatic blade breakage shut-off system - Manual vice - Hydraulic bow - Blade tensioning device - Pendant control - Double mitre head (2-way mitre cutting) - Heavy-duty gearbox

Būklė: naujas, Frame saw: Swivel frame Saw band dimensions: 3160 x 27 x 1.1 mm Band speed: 20-100 m/min Cutting capacity round: 270 mm Cutting capacity square: 270 mm Cutting capacity rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working height: 910 mm Weight approx.: 525 kg Cutting capacity at 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting capacity at 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cjdpfx Aerzx Dpog Dsri Cutting capacity at -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Main motor: 1.5 kW Coolant pump motor: 0.12 kW Band saw KK Kletzer 270DG gravity feed, double miter head, heavy-duty machine made of structural steel Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control system - Coolant system - Automatic blade breakage shut-off - Manual vice - Gravity feed bow - Blade tensioning device - Pendant control - Double miter head (two directions) - Heavy-duty gearbox

Būklė: naujas, Model designation Crsdpfogvkctex Ag Doi Shark 282 SXI evo

Būklė: naujas, Model designation Codpfxjgvkgls Ag Djri Shark 281 SXI evo

Būklė: naujas, Semi-automatic metal band saw with high cutting precision. This machine enables 90° cuts as well as continuously adjustable mitre cuts, from left up to 45° and right up to 30°. (Swivel range: left 45°, right 60°) Standard equipment: - Large rotatable support table, wear-free! (The saw band channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm by hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual lateral adjustment of the vice (L/R) - Electric blade tension monitoring with saw blade breakage detection - Coolant pump with dual supply to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 Cjdpfxsd Dpz So Ag Deri 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Minimum residual piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Būklė: naujas, Cutting diameter: 250 mm Cjdpfx Aow U U Uweg Dori Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirement: approx. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for management of all functions * rotatable, front right - Choice of manual or automatic lowering of saw bow * stepless adjustment of saw frame lowering - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – with digital tension display - 2x saw blade speeds - 1x bi-metal saw blade - Coolant system - 1x mitre stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice