Horizontalios juostinės pjūklai – pusiau automatiniai – apvali pjovimo sritis 0–300 mm pirkti naudotą (125)

Būklė: naujas, – Pusiau automatinis – Hidraulinis – 2 greičiai – Dvigubas kampinis pjovimas – Pjovimo slėgis reguliuojamas hidrauliškai – Aušinimas – Pjūklo juosta 2730 x 27 x 0,9 mm – Kojinis valdymas – Avarinis stabdymas Credpfx Agoh Razfj Dei – Dokumentacija – 400 V

Būklė: naujas, Technines specifikacijas rasite PDF faile. Credpfexp Hygsx Ag Dsi

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. Credofg E H Sjpfx Ag Dei - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 29-0288, Offer 04612 Technical Data: - Cutting capacity at 90° round: 260 mm Cedpfxjgin Nde Ag Djri - Cutting capacity at 90° flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - Cutting capacity at 45° flat: 240 x 200 mm - Machine mounted on original turntable - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Būklė: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year of manufacture 2022, condition: new List price: €14,110 Codpjmf T Hpefx Ag Dori STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! This machine enables stepless miter cuts to the left up to 45° and to the right up to 30° (swivel range left 45°, right 60°). Technical data ● Cutting capacity - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right, round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right, round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left, round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9-1.5 kW / 400 V / 50 Hz ● Blade speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Standard equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensor ● Easy and convenient material clamping with hydraulic short-stroke cylinder ● Hydraulic cutting pressure adjustment ● Simple, stepless adjustment of the saw for miter cuts ● Electric blade tension monitoring with saw blade breakage control

Būklė: naudotas, Gamybos metai: 1991, Technical Details: Cutting diameter: 240 mm Crsdpfsu Nihujx Ag Dsi Saw band length: 3,000 mm Saw band width: 20 x 0.8 mm Cutting range at 90 degrees, round: 240 mm Band speed: 20; 35; 50; 70 m/min Total power requirement: 1.8 kW Approx. machine weight: 330 kg Machine dimensions (LxWxH): approx. 1.9 x 1.1 x 1.1 m Hydraulic operation Vise jaw size 150 x 100 mm, mechanical clamping (by handwheel, see demo video) One transport roller each vertically before and after the vise support Includes 4 bandsaw blades Includes 2 roller conveyors (2000 x 520 x 750 mm and 1000 x 520 x 750 mm) with vertical height adjustment by foot by approx. 120 mm

Būklė: naujas, Bernardo Double Mitre Bandsaw MBS 300 DG-V PRO Technical Specifications Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45° R: 220 mm / 210 x 210 mm Cutting capacity flat 45° R: 220 x 200 mm Cutting capacity round / square 45° L: 230 mm / 200 x 200 mm Cutting capacity flat 45° L: 230 x 200 mm Cutting capacity round / square 60° R: 135 mm / 135 x 135 mm Cutting capacity flat 60° R: 135 x 135 mm Csdpfjd Hzbwex Ag Dori Working height: 930 mm Blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable: 20 – 80 m/min Coolant pump: 100 W Motor output S1 100%: 1.5 kW Motor input S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x W x H): 2000 x 1250 x 1900 mm Weight approx.: 350 kg Scope of Delivery • Bandsaw blade • Workpiece stop • Base frame • Tension gauge for band tension • Bandsaw blade guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Būklė: naujas, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 35 / 70 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cutting monitoring via ammeter - Cutting pressure feed regulator - Blade speed 34 / 74 m/min - Mitre cuts up to 60° to the left and 45° to the right - Patented, ball-bearing turntable for easy mitre adjustment Codod Iip Rjpfx Ag Dsri - Quick-release movable vice - Quick-action clamping lever - Automatic coolant system Shipping cost share: 120 EUR

Būklė: naujas, Cutting diameter: 220 mm Saw blade length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Codjd Iip Tepfx Ag Dori Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx.: 0.24 t Space requirements approx.: 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-action clamping device -Carbide saw blade guides -Blade tension control -Electric coolant system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Stepless feed adjustment -With limit switch -High-speed frame lowering from rest position to workpiece, then switch to normal feed rate -Manual operation

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 25 - 90 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m Cjdpfsfgyh Rsx Ag Deri SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed 25 - 90 m/min - Miter cuts up to 60° to the left and 45° to the right - Ball bearing turntable for rapid miter adjustment - Movable quick-release vise - Quick clamping lever - Automatic coolant system

Būklė: naujas, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 90 degrees: round 227 mm Crjdpfxjfgyh Ej Ag Dsi Cutting capacity at 90 degrees: square 220 mm Cutting capacity at 90 degrees: flat 260 x 220 mm Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 45 degrees: flat 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - Automatic cutting - Base frame - Coolant pump - Chip brush for cleaning the saw band - Quick-release vice

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Crsdpfx Agoxaa S Ro Doi Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for managing all functions * Swivel-mounted on the front right - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of saw frame descent - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – incl. digital value display - 2-speed saw blade operation - 1x Bi-metal saw blade - 1x Mitre stop - Chip cleaning brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Būklė: naujas, Gamybos metai: 2026, Didelės galios juostinis pjūklas su hidrauliniu pjūklo rėmo nuleidimu (valdymo vožtuvu) nuožulniems pjūviams nuo 0° iki 60° dešinėn / 45° kairėn standus, tvirtas ketaus pjūklo rėmas varoma drožlių valymo šepetys pjovimo padavimas nuo rėmo svorio nuožulnumo nustatymas ir užspaudimas rankiniu būdu greito pritvirtinimo spaustukas, perstumiamas elektrinė aušinimo skysčio pompa Crodpfxsxlhmys Ag Dei preciziniai kieto metalo juostinio pjūklo kreipikliai, šlifuoti (reguliuojami) didelių matmenų apvalus atraminis stalas, sukasi su nuožulniais pjūviais, nuožulnumo indikatorius (skala) operatoriaus pusėje lengvai nuimama drožlių surinkimo dėžė medžiagos ribotuvas 500 mm su skale pjovimo juosta su kombinuotu dantymu 4/6. Techniniai duomenys Variklis trifazis 400 V, 1,5 kW Juostinio pjūklo matmenys 2720 x 27 x 0,9 mm Sūkuriniai ratai Ø 325 mm Pjovimo greitis 20-120 m/min. Spaustuvo tarpas 320 mm Darbo aukštis 760 mm Svoris 390 kg Įrenginio matmenys (P x G x A) 1480 x 1700 x 2000 mm

Būklė: naujas, Bandsaw machine Brand: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Crodpfx Agoilg Hdj Dsi Cutting capacity (round): 300 mm Blade speed: 20-100 m/min, infinitely variable Standard features: - Fully hydraulic, semi-automatic design After starting, the machine automatically clamps, returns to the starting position after the cut, stops the saw blade, and opens the vice. - Cut sensor for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Būklė: naujas, Cutting diameter: 240 mm Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangular: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangular: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx. 0.26 t Space requirement approx. 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-release vice with rapid clamping device Csdpfod Iip Sjx Ag Deri • Quick-release lever for easy handling • Frame and gearbox cast in one piece, very quiet operation and extremely low vibrations • Electronic monitoring of blade tension and blade breakage, band saw blade cover • Carbide-tipped saw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic cooling system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic saw frame lowering via the hydraulic cylinder, stepless feed adjustment, with limit switch at the end of the cut. Rapid lowering of the saw frame from rest position to the workpiece, then switch to normal cutting feed (e.g. for marking). Manual operation: The hydraulic cylinder acts as a brake (e.g. for notching). Thanks to the brake cylinder, the saw can be positioned in any position during the return stroke.

Būklė: naujas, Bandsaw Frame: Swivel Frame Saw Band Dimensions: 3160 x 27 x 1.1 mm Band Speed: 20–100 m/min Cutting Range Round: 270 mm Cjdsrzx Dtopfx Ag Dsri Cutting Range Square: 270 mm Cutting Range Rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working Height: 910 mm Coolant Pump Motor: 0.12 kW Weight approx.: 525 kg Cutting Range 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting Range 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cutting Range -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Motor: 1.5 kW Bandsaw KK Kletzer 270DGH with Hydraulic Double-Miter Head. Heavy-duty steel construction machine. Standard Equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic blade breakage shut-off - Hydraulic vise - Hydraulic bow - Saw blade tensioning device - Pendant control - Two-way miter head - Heavy-duty gearbox

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 250 mm, pjovimo plotis (maks.): 280 mm, juostinio pjūklo ilgas: 2 950 mm, juostinio pjūklo greitis: 1 667 mm/s, pjūklo juostos plotis: 27 mm, TECHNINĖS DETALĖS Juostinio pjūklo matmenys: 2.950 x 27 x 0,9 mm Greitis: 15–100 m/min Csdpfezapxzjx Ag Dori Spaustuvo atidarymas: 285 mm Pjovimo sritis prie 90° apvali: 250 mm Pjovimo sritis prie 90° kvadratinė: 220 mm Pjovimo sritis prie 90° plokščia: 280 x 220 mm Pjovimo sritis prie 60° apvali: 120 mm Pjovimo sritis prie 60° kvadratinė: 80 mm Pjovimo sritis prie 60° plokščia: 140 x 100 mm Pjovimo sritis prie 45° apvali: 230/200 mm Pjovimo sritis prie 45° kvadratinė: 200/170 mm Pjovimo sritis prie 45° plokščia: 220 x 200/200 x 140 mm Valdymas: konvencinis ĮRENGINIO DUOMENYS Bendras pajėgumas: 2,2 kW Svoris: 990 kg Įrenginio matmenys: 2.500 x 2.230 x 2.050 mm

Būklė: naujas, The SPECIAL 411 MS MACC is a semi-automatic bandsaw designed for cutting solid bars and small profiles, offering high performance and excellent precision. The robust frame ensures necessary rigidity and accuracy for the cutting group. The blade drive is equipped with a two-speed motor, and the special gearbox is complete with a bronze gear and a hardened, ground worm screw. The properly sized flywheels and the blade guides are sturdy, constructed with sealed roller bearings and adjustable carbide inserts. The blade tension can be applied via an electromechanical micro-switch control, operating with blade rotation. Safety devices are provided on the flywheel cover guard and the blade itself. The machine also comes with a swivel plate for material support and a vise with a quick-approach mechanism. Operation: Cycle start is initiated by pressing the start button; the machine performs the following sequence: 1. Closes the vise and starts the blade motor 2. Lowers the arm for cutting 3. The arm returns to the initial position 4. Stops the blade motor 5. Opens the vise Manual cutting option is available. Cjdpfx Aefh R Tyog Dori Cutting speed (m/min): 38–77 Blade thickness (mm): 1.2 Cutting range: 45° left, 60° right Stop for repeat cuts: Adjustable Coolant pump power: 0.06 kW

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Crsdpfxjd Iip Ns Ag Dei Table height: 940 mm Blade speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double-mitre metal bandsaw with: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for fast mitre adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Būklė: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting capacity flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions (L x W x H): 4.485 x 1.68 x 3.15 m Cedofg E Hpspfx Ag Dori The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance when cutting specialty steels. • The electro-welded machine frame and the steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw bow, vice, feed, saw band guides) operate via state-of-the-art linear guides with high static and dynamic load capacity, ensuring minimal sliding friction. • Another distinguishing feature is the material positioning rollers, which are hydraulically driven. They move perpendicular to the material, allowing for optimal clamping. • Thanks to height control of the saw blade position, the operator can set the band close to the material's top edge. After cutting, the band automatically returns to its previous position. Alternatively, the band can remain in the lower position. During the cutting cycle, the software compares the cutting load with preset values, enabling the sawing process to stop in case of anomalies. • The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly quiet operation at a constant pressure. • Precision-ground carbide inserts clamp the saw blade, complete with lateral hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw blade is tensioned via a hydraulic cylinder controlled by the machine software. The tension is automatically released after a specified time when the machine is idle or when a cycle has finished. • CNC-controlled automatic versions are available in the X-TECH 900 / 1200 models, featuring a 500 mm feeding length for high-production applications. • The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, ensuring precise positioning even at maximum load. • All guided movements are handled by four recirculating ball linear guides with high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Būklė: naujas, Band Saw Machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Csdsdynpcspfx Ag Dsri Cutting capacity (round): 225 mm Cutting speed: 20 – 90 m/min Standard equipment includes: - Horizontal vice - Length stop - Automatic shut-off at end of cut - Chip removal brush - Coolant system - Operating manual

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €14,110 Leasing rate: €270.91 Saw frame: pivoting frame Saw band dimensions: 3270 x 27 x 0.9 mm Band speed: 35/70 m/min Cutting capacity at 0° round: 280 mm Cutting capacity at 0° square: 240 mm Cutting capacity at 0° flat: 420 x 200 mm Cutting capacity at 45° round: 260 mm, square: 240 mm Cutting capacity at 60° round: 170 mm, square: 160 mm Cutting capacity at -45° round: 200 mm, square: 180 mm Working height: 830 mm Length: 1600 mm Width: 1600 mm Crsdjynm Suopfx Ag Dji Height: 1800 mm Weight: 488 kg Hydraulic vice Lowering and raising of the saw frame via hydraulic cylinder Rapid lowering Automatic rapid lowering and raising, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Double safety push-buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vice closes; rapid hydraulic lowering of the saw frame; band rotation and coolant pump start; lowering at working speed; cut ends; band rotation and coolant pump stop; rapid raising of the saw frame; saw frame lift stops; vice opens OPTIONS: Roller conveyors and saw bands on request

Būklė: naujas, Gamybos metai: 2026, For cutting pipes and solid materials made of stainless and tool steel Two cutting speeds via a pole-changing motor Robust gearbox with hardened and ground shaft Precise and heavy-duty band guides with adjustable carbide plates Longer blade life due to a 25° saw arm incline Efficient coolant application at the band guides Electromechanical band tension monitoring: if tension deviates, a microswitch turns the machine off Chip removal brush for optimal cleaning and maintenance of the saw blade Semi-automatic operation: - Automatic workpiece clamping after starting the cutting cycle - Cutting performed at selected band speed - Automatic stop of the lowering motion and blade at the bottom position - Automatic return of the saw arm to its upper position - Vise opens automatically - Operator only needs to load/unload the material Equipment: - Two cutting speeds - Cutting depth sensor - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions: Length approx. 1860 mm Width/Depth approx. 1045 mm Codpfx Aed Hx Uqsg Dori Height approx. 1750 mm Weight approx. 405 kg Drive motor: Power rating: 1.5 kW Electrical data: Connection voltage: 400 V Machine data: Saw blade speed(s): 20 – 100 m/min Speed adjustment: stepless Saw blade length: 2720 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre range: +60° to -45° Cutting capacities: 0° round (pipe): 230 mm 0° round (solid): 150 mm 0° rectangular (hollow profile): 280 x 180 mm 0° bundle (pipe): 180 x 120 mm -45° round (pipe): 195 mm -45° round (solid): 110 mm -45° rectangular (hollow profile): 180 x 170 mm -60° round (pipe): 125 mm -60° round (solid): 80 mm -60° rectangular (hollow profile): 120 x 100 mm +45° round (pipe): 185 mm +45° round (solid): 110 mm +45° rectangular (hollow profile): 180 x 120 mm Feed: Table height for material infeed: 785 mm Min. remaining workpiece length: 22 mm

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €10,460 Leasing rate: €200.83 Saw frame: swivelling frame Saw blade dimensions: 3010x27x0.9 mm Blade speed: 35/70 m/min Cutting capacity 0° round: 260 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 330x120 mm Cutting capacity 45° round: 200 mm, square: 190 mm Cutting capacity 60° round: 120 mm, square: 115 mm Working height: 830 mm Length: 1600 mm Width: 1200 mm Height: 1800 mm Weight: 390 kg Hydraulic vise Lowering and lifting of the saw frame via hydraulic cylinder Rapid lowering Automatic rapid lowering and lifting, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Double safety push buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; rapid hydraulic lowering of saw frame; blade rotation and coolant pump start; lowering with working speed; end of cut; blade rotation and coolant pump stop; rapid lifting of saw frame; stop lifting of saw frame; vise opens Options: Adjustable clamping pressure of vise (R1) EUR 403,-- Roller conveyors and saw blades on request Csdpsynm R Refx Ag Dori

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €10,860 Leasing rate: €208.51 Saw frame: pivoting frame Crsdpfsynm Sbsx Ag Dei Saw blade dimensions: 3120 x 27 x 0.9 mm Blade speed: 35/70 m/min Cutting capacity at 0° (round): 280 mm Cutting capacity at 0° (square): 240 mm Cutting capacity at 0° (flat): 370 x 140 mm Cutting capacity at 45° (round): 225 mm, square 215 mm Cutting capacity at 60° (round): 140 mm, square 140 mm Working height: 830 mm Length: 1,650 mm Width: 1,200 mm Height: 1,850 mm Weight: 390 kg Hydraulic vice Lowering and raising of the saw frame via hydraulic cylinder Rapid lowering Automatic rapid lowering and raising, controlled by sensor pin Adjustable cutting pressure according to material cross-section and quality Dual safety push buttons for cycle start 2 speeds Coolant system included _CUTTING CYCLE_ Vice closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid raising of the saw frame; stop of saw frame raising; vice opens OPTIONS: Roller conveyors and saw blades available on request