Juostinis pjūklas - horizontalus

MEP SHARK 282 SXI - Evo

Cutting diameter: 250 mm
Cutting capacity at 90 degrees, flat: 280 x 220 mm
Cutting capacity at 90 degrees, square: 220 x 220 mm
Vice opening: 285 mm
Blade speed range: 36/72 m/min
Saw blade dimensions: 2950 x 27 x 0.9 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight approx. 485 kg
Space requirement approx. 1700 x 1000 x 1800 mm
Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO
with semi-automatic dynamic and manual operation, equipped with an MEP-28 control
unit for mitre cuts from 45° right to 60° left.

Semi-automatic function:
At the start of the cycle: - Vice closes and motor starts
– Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens.

Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.)

Key features:
- New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position.
- Low-voltage control panel:
- Polyester membrane keypad with thermoformed raised buttons and operation control light.
- Display shows:
* Diagnostics (messages in the user's language)
* Alarms (description of alarm causes)
* Status of inputs and outputs
* Cut counter
* Time required for the performed cut
* Saw motor current draw
* Blade tension
Gksdpfxjfg E H Ss Afqjb
* Blade speed
* Numeric display of head position.
- Manual 24-V cycle switch handle, IP55 rated.
- Complete program for all special cutting cycles.
- Option to set up additional special cutting cycles for specific applications.
- Latest-generation hydraulic control unit, highly efficient with low energy consumption.
- Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed.
- Dual blade speed (36/72 m/min.) with control
- Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min.
- Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut.
- Clamping device adjustable to the left and right, with quick-release vice.
- Manual blade tension control with electronic converter display on screen.
- Base frame with extendable coolant tray.
- Electric coolant pump for band cooling and lubrication.
- Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil.
- Chip cleaning brush.
- Machine is designed for pallet truck transport.
- Length stop for repetitive cuts of equal length.
- Material support arm with roller, for securing the loading platform.
- Bimetal bandsaw blade for solid and profile material.
- Tools and operating instructions in the respective user language.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.