Juostinis pjūklas ø250 mm

Mep SHARK 282 SXI EVO

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Rcedpjfg E H Sofx Alcoh Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naudotas, mašinos/transporto priemonės numeris: 050189, for slot width: 13 - 30 mm for slot depth: 22 - 35 mm Cutter speed approx.: 1200 rpm Drive motor: AC 220 V, 1020 W Rjdjb Amlhopfx Alcoch Weight: approx. 6 kg

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment/features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted front right, rotatable Rcedpfxexaatbe Alcoh - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of saw frame lowering - Carbide saw blade guides - Hydraulic saw blade tensioning incl. digital value display - 2 saw blade speeds - 1 x bi-metal saw blade - Coolant system - 1 x angle stop - Swarf removal brush - Machine frame with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Būklė: naujas, Model designation Rcodpfxjgvkcto Alceh Shark 282 SXI evo

Būklė: naujas, Cutting diameter: 225 mm Bandsaw blade length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Rodpfx Aegxi D Tolcoch Cutting speed: 45/90 m/min Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight: approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre bandsaw - Mitre cuts up to 60° to the left - Vice with quick-acting clamping device - Blade tension control - Electric coolant system

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for managing all functions * Swivel-mounted on the front right Rcjdjxaa S Rjpfx Alcsh - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of saw frame descent - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – incl. digital value display - 2-speed saw blade operation - 1x Bi-metal saw blade - 1x Mitre stop - Chip cleaning brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Būklė: naujas, 2 greičiai 36/72 m/min Spaustuvo atidarymas 285 mm Juostinio pjūklo matmenys 2950 x 27 x 0,9 mm Pjovimo sritis esant 90 laipsnių: kvadratas 220 mm Rjdpoyv Narofx Alcjch Pjovimo sritis esant 90 laipsnių: apvalus 250 mm Pjovimo sritis esant 90 laipsnių: plokščias 280x220 mm Pjovimo sritis esant 60 laipsnių: apvalus 120 mm Pjovimo sritis esant 60 laipsnių: kvadratas 80 mm Pjovimo sritis esant 60 laipsnių: plokščias 140x100 mm Pjovimo sritis esant 45 laipsnių: apvalus 230/200 mm Pjovimo sritis esant 45 laipsnių: kvadratas 200/170 mm Pjovimo sritis esant 45 laipsnių: plokščias 220x200/200x140 mm Bendras galios poreikis 1,5/1,8 kW Svoris 485 kg Staklių matmenys 1970x1150x1840 mm Pusiau automatinė funkcija: - Spaustuvas užsidaro ir variklis įsijungia - Pjūklo galva nusileidžia pjovimui - Variklis išsijungia - Pjūklo galva pakyla, spaustuvas atsidaro Pusiau automatinė dinaminė sistema: Rankinis pjūklo lanko nuleidimas iki norimos padėties ir ciklo paleidimas rankiniu mygtuku. Viršutinė padėtis įsimenama automatiškai.

Būklė: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year of manufacture 2022, condition: new List price: €14,110 STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! This machine enables stepless miter cuts to the left up to 45° and to the right up to 30° (swivel range left 45°, right 60°). Technical data ● Cutting capacity - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm Rcsdpfx Alomf T Hpocjh - 45° right, round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right, round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left, round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9-1.5 kW / 400 V / 50 Hz ● Blade speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Standard equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensor ● Easy and convenient material clamping with hydraulic short-stroke cylinder ● Hydraulic cutting pressure adjustment ● Simple, stepless adjustment of the saw for miter cuts ● Electric blade tension monitoring with saw blade breakage control

Būklė: naudotas, Single-column hydraulic press, straightening press, C-frame press ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Model RSD 1500 - 125 Machine No. 317 / 690, year of manufacture approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power pack - Ram surface with 4 threads M16 and 20 mm guide groove, center locating hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Rjdped Swtasfx Alcech Required space L x W x H: 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Būklė: naujas, Table length: 3000 mm Table width: 1500 mm Table height (side panel): 200 mm Weight: 1374 kg SIEGMUND Authorized Dealer – all items available! Product Description - Through-hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panels made of premium steel S355J2+N + plasma nitrided - Bore diameter Ø 28 mm - Surface boreholes in diagonal grid Rodpfx Alsxabiwscoch - Corners, edges, and boreholes rounded - Side panel height: 200 mm - Side panel boreholes in diagonal grid - Including surface scale - Rib-reinforced construction - Grid lines allow precise setups The welding tables are equipped with a standard scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Equipment: - 28 mm hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma-nitrided "Extreme" version with scale - With diagonal grid on the table surface - Side panel with diagonal grid - Including 6x base feet