Berg Und Schmid pirkti naudotą (127)

Būklė: geras (naudotas), Gamybos metai: 2011, From company closure: Berg und Schmid VKS 370 HA Year of manufacture: 2011 Semi-automatic 4-meter roller conveyors left and right Left stop with digital length measurement system, adjustable via handwheel Cutting capacity with 370 mm saw blade: Round: 120 mm – Square: 100 mm – Rectangle: 180x100 mm at 90° At 60°: Round: 110 mm – Square: 90 mm – Rectangle: 90x100 mm Mitre cuts: left up to 60°, right up to 45° Saw blade bore: 40 mm Saw blade speed: 15–70 rpm 380 Volt Coolant pump Semi-automatic operation: Nwsdpjwa Ecqsfx Acpjf 1. Clamp material 2. Saw starts 3. Fast lowering to start of material or direct cutting in series mode 4. Saw band off 5. Raise frame just above material 6. Open clamping vice

Būklė: naudotas, Įranga: Svirtinė spaudė bukmedžio kampams, eiga 40 mm, įgilis 73 mm Nodpfx Acex Rh D Sspewf

Būklė: geras (naudotas), Sriegiklis Berg + Schmid Delta 4 Nedpfx Acjyy S Efepowf Produkto aprašymas Pjovimo diapazonas: R 1/3 - 4", M8-M52 Galingas kondensatorinis variklis 230V, 1 kW, ypač tylus veikimas 3 sukimosi greičiai: 15+27+58 min-1 (taip pat esant pilnai apkrovai, integruota pavara) Su 2 automatinėmis sriegimo galvomis: R 1/2 -2", R 2 1/2 - 4" Pilnas komplektas su pjovimo žnyplėmis: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", kūginis DIN 2999 Automatinė aušinimo sistema tiesiogiai per sriegimo galvą Greitveržlė griebtuvas, vamzdžių pjoviklis, vamzdžių vidaus frezuoklis Pridedama darbinės saugos įranga su apsauginiu kojiniu jungikliu ir 4 atraminėmis kojelėmis.

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Nedpfxoxfwbts Acpewf Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused demonstration machine!!!!! 2-column high-performance bandsaw automaton of the SBS series • Modern SNC 20 control unit in CNC version • Frequency-controlled saw drive • Work lamp • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double vice (before and after the band) • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows for convenient and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control automatically calculates the trim cut and the number of feeds. The error code display system also provides for rapid troubleshooting and error analysis. Including band run monitoring (EUR 1,800)

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Njdpfx Ajd Iipxecpewf Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw blade length: 3375x27x0.9 mm Blade speed: 18 - 100 m/min Table height: 940 mm Total power requirement: 1.5 kW Machine weight: approx. 0.65 t Space requirement: approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, semi-automatic hydraulic model GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table Nodpfsfgyiaex Acpewf - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Double miter metal bandsaw, GBS 250 Super AutoCut - Miter cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table Nwsdpsfgyh Tefx Acpsf - Quick-release vise - Heavy-duty, large material support - Automatic cooling system

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Nodpfx Acofgyh Repjwf Cutting capacity at 90 degrees: rectangular 290 x 210 mm Blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 25 - 90 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed 25 - 90 m/min - Miter cuts up to 60° to the left and 45° to the right - Ball bearing turntable for rapid miter adjustment - Movable quick-release vise - Quick clamping lever - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double-mitre metal bandsaw with: Nwodpjd Iip Nsfx Acpof - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for fast mitre adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx.: 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automatic Machines of the SBS Series The SBS series convinces with its advanced technology, high quality, durability, and an unrivalled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tension • Clamping pressure regulation Nwjdpefb Nbfsfx Acpof • Double vise (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, prepared for electrical and hydraulic operation • Chip conveyor The SNC 20 control system allows convenient and intuitive input of up to 20 different sawing jobs (length and quantity). When entering the target dimension, the control automatically calculates the kerf and the number of feed movements. Additionally, the fault code display system provides fast analysis for error correction.

Būklė: naujas, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vise - Material height sensor - Cutting control via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy miter adjustment Nodpfx Aofgyh Sjcpswf - Movable quick-release vise - Quick-release lever - Automatic coolant system

Būklė: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Nwedpfsnq Sanox Acpsf Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing turntable - Laterally adjustable vise - Robust, large material support - Automatic cooling system Image shows semi-automatic version.

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) Nwodpfxed Iipmj Acpsf • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Nwjdpfxjfgyics Acpof Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw blade length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Nwjdpfx Ajfb Nbgecpef Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series impresses with advanced technology, high quality, long service life, and exceptionally comprehensive standard equipment. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the blade) • Creep mode for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor The SNC 20 control allows convenient and straightforward entry of up to 20 different sawing tasks (length and quantity). When entering the desired dimension, the control automatically calculates the cutting allowance and the number of feed cycles. In addition, the error code display system enables quick diagnosis for troubleshooting.

Būklė: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band dimensions: 5450 x 41 x 1.3 mm Table height: 800 mm Njdjfg E Hvspfx Acpewf Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series stands out through advanced technology, premium quality, durability, and an unparalleled comprehensive standard configuration. • Modern SNC 20 control system in CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light included • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the saw blade) • Inch mode for positioning • Electrical and hydraulic bundle clamping provision • Chip conveyor The SNC 20 control system allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired length is entered, the control system automatically calculates cutting allowance and the number of feed cycles. The error code display system also allows for quick fault analysis and troubleshooting.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Nwodpfxjfu Nbbo Acpsf Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Blade speed 15 – 100 m/min Table height 844 mm Saw blade dimensions 4250 x 34 x 1.1 mm Total power requirement 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Sturdy, yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low vibration thanks to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LED indicators for monitoring all safety functions • Large-dimensioned drive wheels (520 mm) • Clear and precise mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw Nodpfx Acefg E Hlopewf 3. Rapid lowering to the beginning of the material or direct cutting in series cuts 4. Switch off saw blade 5. Raise frame just above the material 6. Open vise

Būklė: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Nodpfxjfd Abaj Acpjwf Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw band length: 3375 x 27 x 0.9 mm Band speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support - Automatic cooling system The illustration shows the semi-automatic version.

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable Nedpfxjfn Andj Acpowf • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for rapid cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams, as well as solid material. The material is clamped vertically on the feed and discharge sides. Starting from the K-tech 800H, the machine comes standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. Nedpjfgyifsfx Acpjwf The machines are equipped as standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control allows the programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is mounted separately and is guided via ball-bearing linear guides, precision-ground rack, and a robust, frequency-controlled geared motor.

Būklė: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250 x 600 mm Saw blade length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space required: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for rapid cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams, as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. From K-tech 800 H onward, the machine comes standard with an additional horizontal vice. Nsdpfxofgyige Acpswf The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming up to 90 cutting programs with various cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening gripper jaws” that are hydraulically controlled. This ensures safe gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and guided by precision linear ball guides, a ground rack, and a frequency-driven, robust gear motor.

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Nwodpfxed Iipze Acpof Control system: CNC Total connected load: 1.5/1.8 kW Machine weight approx.: 0.63 t Space requirement approx.: 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45°: fully automatic operation • Mitre left 60°: semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: very quiet, low vibration cutting • Removable chip tray (cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Top access to saw, material, and feed unit • Folding safety cover • Fine adjustment of feed rate • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple cut lengths • Automatic feed unit (CNC) via ball screw spindle with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, residual piece length 170 mm.

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: Nedpfx Ajfg E Hmocpowf • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: naujas, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter band saw for fast cutting, equipped with Pusher System P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved with the new “B&S Positioning System.” An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake using large-radial center positioning. Nwjdpfofg E Hnox Acpof The work table is mounted on high-quality, preloaded bearings, ensuring very easy rotation. CNC control The CNC controller allows the programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Double-sided clamping positioning system The B&S pusher system, feed and positioning system, is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a separate assembly and is guided by ball-bearing linear guides, precision-ground rack, and a robust frequency-driven gear motor.