Vienos kolonos hidraulinė presas, tiesinimo presas, hidraulinis štampavimo rėmas; presas su hidrauli

ECKOLD RSD 1500 - 125

Sąlyga: naujas, Gamybos metai: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Nwjdpjhgihksfx Agisc Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control system. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design enables rapid tool changes without loss of accuracy. - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high loads. - The universal tool holder with various tools allows for highly flexible operation.

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Njdpfog Ip Efjx Agijwc Operating voltage: 380 V Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Gamybos metai: 2009, Sąlyga: geras (naudotas), Lifting capacity: 30 t Precision lift Nedpfx Aeqiz N Rogiewc Lifting height: 9 meters

Gamybos metai: 1972, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Nwsdpob Tdqujfx Agijc Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermal Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm Nwedpeph Uk Njfx Agijc - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: - Determined at maximum closing force with 70% utilization:

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: Nwsdpfxjfxyhfe Agijc The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Nedpfx Aod Du T Iegiewc Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Sąlyga: naujas, veleno skersmuo: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rolls are hydraulically adjustable - Three driven rolls Nwodpjucqquefx Agijc - 2 digital displays - Brake motor - Usable in horizontal or vertical position - Mobile control panel - Emergency stop - Documentation - 400V

Sąlyga: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: Nsdpsnh R Ekofx Agiowc • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Sąlyga: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t Nwsdpobn Amfefx Agisc