Mep Shark 282 Sxi Evo pirkti naudotą (5)

Sąlyga: naujas, Model designation Tsdpfjgvkctex Ag Rsf Shark 282 SXI evo

Sąlyga: naujas, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 220 mm Cutting range at 90 degrees: square 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Todpfx Agsfg E H Se Rsf Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO Equipped with semi-automatic dynamic and manual functions, features the MEP-28 control system for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and start of the cycle via hand button). Main features: - New, centralized control console mounted on an articulated arm, enabling operation from any working position. - Low voltage control panel: - Polyester membrane keypad with thermoformed, raised keys and control signal display. - Display for: * Diagnostics (messages in user’s language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time taken for each cut * Saw band motor power consumption * Saw band tension * Saw band speed * Numeric display of head position. - IP55 manual 24 V cycle switch handle. - Complete program of all special cutting cycles. - Programming possible for additional special cutting cycles for specific applications. - Newest-generation hydraulic unit, highly efficient with low energy consumption. - Large work surface with turntable on roller bearings, 265 mm with preloaded thrust bearing, mounted. - Dual band speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw arc stroke programmable directly from the control panel, for adaptation to the workpiece material. - Clamping device can be shifted laterally left and right, with quick-release vice. - Manual band tension control via display, using electronic converter. - Machine base with extendable coolant tray. - Electric coolant pump for the cooling and lubrication of the saw band. - Prepared for installation of the minimum quantity lubrication kit for the saw band (optional), in addition to standard coolant system with emulsion oil. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repetitive cutting to same length. - Material support arm with roller, for fixing loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the corresponding user language.

Sąlyga: naujas, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5 / 1.8 kW Jaw opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36 / 72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button). Key features: • New centralized control console on a pivoting arm, allowing operator access from any working position • Low-voltage control panel: – Polyester membrane keypad with thermoformed raised buttons and actuation control signal – Display shows: * Diagnostics (messages in user’s language) * Alarms (causes description) * Status of inputs and outputs * Cut counter * Time used for each cut * Saw blade motor current draw * Saw blade tension * Saw blade speed * Numeric display of saw head position – Manual 24V operation switch, IP55-rated • Complete program for all special cutting cycles • Identification of additional special cutting cycles for unique applications • New generation hydraulic control system: powerful and energy-efficient • Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings • Dual blade speeds (36/72 m/min) with control • Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min • Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height • Movable clamping device to the left and right, with quick-release vice • Manual blade tensioning control with electronic readout on display • Base frame with pull-out coolant tray Tedpscgbq Isfx Ag Rsf • Electric coolant pump for blade cooling and lubrication • Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system • Chip removal brush • Designed for forklift transport • Length stop for repeat cuts • Material support arm with roller for mounting a loading table • Bi-metal saw blade for solid and profile materials • Tool kit and operating instructions in the user’s language For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for managing all functions * Swivel-mounted on the front right - Choice of manual or automatic saw frame descent Tsdpjxaa S Rofx Ag Rjf * Infinitely variable adjustment of saw frame descent - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – incl. digital value display - 2-speed saw blade operation - 1x Bi-metal saw blade - 1x Mitre stop - Chip cleaning brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment/features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of saw frame lowering - Carbide saw blade guides - Hydraulic saw blade tensioning incl. digital value display - 2 saw blade speeds - 1 x bi-metal saw blade - Coolant system - 1 x angle stop - Swarf removal brush - Machine frame with forklift pockets - Operating manual in German Semi-automatic operation: Tjdpfx Ajxaatbsg Rjf - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice