Mep Shark 282 Ccs pirkti naudotą (116)

Sąlyga: naujas, Model designation Shark 282 CCS Kwedsgvkbcopfx Af Ijt

Sąlyga: naujas, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Vice: 285 mm Speed range: 36/72 m/min Saw band length: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 440 kg Required space approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Large mounted rotary table * for mitre cuts from 45° right to 60° left Kedpfx Afjxaarks Iewt - Automatic saw bow lowering * with steplessly adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides made from carbide plates - 1x saw band - 1x angle stop - Rotating chip removal brush - Control panel – front right - Hydraulic pressure cell for saw band tension * with analog pressure indicator (manometer) - Machine base with forklift pockets - Coolant unit - Operating manual in German

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Kwodpfx Ajxabpwef Ijt Space requirement: approx. 1620 x 1360 mm Equipment/features: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotary table * for miter cuts from 45° right to 60° left - Automatic saw frame lowering * with steplessly adjustable feed * automatic cut-off at end of cut - Manual cutting mode selectable - 2x bandsaw blade speeds - Carbide blade guides - 1x saw blade - 1x angle stop - Swarf removal brush - Control panel – front right - Hydraulic tensioning system for saw blade * with analog pressure display (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED : - MEP LubeCut micro-dosing unit

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, juostinio pjūklo ilgas: 2 950 mm, pjūklo juostos plotis: 27 mm, įvesties srovės tipas: Nuolatinė srovė, Apvalaus plieno pjovimo diapazonas ties 45°: 230 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 250 mm, pjovimo aukštis (maks.): 285 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Power: 1.5/1.8 kW Vise Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity 0°: 250 / 220x220 / 280x220 mm Cutting Capacity 45° right: 230 / 200x200 / 220x200 mm Cutting Capacity 45° left: 200 / 170x170 / 200x140 mm Cutting Capacity 60° right: 120 / 80x80 / 140x80 mm Cutting Capacity 60° left: Description: MEP Bandsaw: Standard Equipment: Kjdpfx Aoxyywmof Iewt - Quick-action vice with adjustable guide strips - Hydraulic blade tensioning device with tension pressure indicator - Base frame with removable coolant tray - Chip removal brush - Precision stops set for 0°, 45°, and 60° left, and 45° right cuts - Length stop for repetitive cutting - Material support arm, also for attachment of roller conveyor/loading side - Rotary table for double mitre cuts - Designed for transport with pallet truck/forklift - Bi-metal saw blade M2 for solid and profile material - Tool kit and operating manual Electrical Equipment: - Control panel - Marked cable connections - Indicator lamp for operational readiness - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic circuit breaker - Undervoltage release - IP 55 protected control handle - Phase sequence indicator - Low voltage system 24 Volt - Electric coolant system 48 V - (Micro-spray unit optionally addable) Motor: 1.5/1.8 kW 2 Speeds: 36/72 m/min Vise opening: 285 mm Blade: 2950 x 27 x 0.9 mm Weight: 440 kg

Sąlyga: naujas, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height: mm Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight approx.: 440 kg Ksdpfxsfg E H Ns Af Iswt Space requirement approx.: m Absolute special price!! EUR 7,170 (Current price from 2024 is EUR 9,425) Standard equipment: - Vice with quick adjustment and adjustable guide strips - Hydraulic blade tensioning device with tension pressure indicator - Base frame with removable coolant tray - Swarf removal brush - Set precision stops for cuts at: 0°, 45° and 60° to the left and 45° to the right - Rotary table for double mitre cuts - Electric coolant system 48 V (option to fit a micro-spray device)

Sąlyga: naujas, Gamybos metai: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustment of cutting pressure via compensation spring * Stable, torsion-resistant and low-vibration saw frame made of cast steel Kwodeftmxvopfx Af Iot * Large, easily adjustable and mounted rotary table, rotary table centered by central axis pin with indexing at 0° / 45° / 60° and internal table locking for intermediate angles * Quick-release vice * Carbide band guides for maximum cutting precision * Hydraulic unit for saw band tensioning and monitoring, with indicator on the pressure gauge * Clearly arranged control panel with all operating elements * Base frame, coolant tray, coolant pump, swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw band dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 / right mm * Cutting capacity at 45 degrees: square left 200 / right 170 mm * Machine weight: approx. 0.4 t * Space requirement: approx. 1.8 x 1.3 x 1.8 m

Sąlyga: naujas, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (flat): 110 x 110 mm Kwjdpfx Afexz Hhzj Ist Cutting capacity at 60° (square): 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t High-performance mitre band saw for cutting from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (infinitely variable feed control and automatic shutdown at end of cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with infinitely variable adjustment of lowering speed and setting the cutting pressure via compensating spring - Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel - Quick-release vice - Carbide band guides for maximum cutting precision - Large dimension, adjustable idler wheels made of cast steel - Hydraulic unit for saw band tensioning and monitoring with display on manometer (band tension: 900 kg) - Clearly arranged control panel with all control elements - Electric coolant pump for band cooling and lubrication - Swarf cleaning brush for cleaning the saw band

Sąlyga: naujas, Model designation Shark 281 CCS Kwodpfx Afsgvkcho Iet

Sąlyga: naujas, Model designation Kwjdpfx Aogvquwof Iot Shark 332-1 CCS

Sąlyga: naujas, Model designation Shark 282 SXI evo Kjdogvkctjpfx Af Iewt

Sąlyga: naujas, Juostos pjūklo juostos matmenys: 2950x27x0,9 mm 2 greičiai: 36/72 m/min Spaustuvo atidarymas: 285 mm Pjovimo sritis prie 90 laipsnių: apvali – 250 mm Pjovimo sritis prie 90 laipsnių: kvadratinė – 230 mm Pjovimo sritis prie 90 laipsnių: plokščia – 280x200 mm Pjovimo sritis prie 45 laipsnių: apvali – 190 mm Pjovimo sritis prie 45 laipsnių: kvadratinė – 180 mm Pjovimo sritis prie 45 laipsnių: plokščia – 180x180 mm Pjovimo sritis prie 60 laipsnių: apvali – 120 mm Pjovimo sritis prie 60 laipsnių: kvadratinė – 110 mm Pjovimo sritis prie 60 laipsnių: plokščia – 110x110 mm Bendras galios poreikis: 1,5/1,8 kW Svoris: 375 kg Matmenys: 1700x1000x1650 mm Įranga: - Su pusiau automatiniu nuleidimu Kwsdpfx Afjh Dmh Hs Ijt - CUT CONTROL SYSTEM leidžia pusiau automatiškai nuleisti pjovimo lanką naudojant pjovimo galvos svorį - Nuleidimo greitis reguliuojamas be pakopų. Vienetiniai pjūviai galimi su tolygiu padavimu

Sąlyga: naujas, Cutting diameter: 300 mm Cutting range at 90°: flat 330 x 260 mm Cutting range at 90°: square 260 x 260 mm Cutting range at 45°: flat 270 x 200 mm Cutting range at 45°: round 250 mm Cutting range at 45°: square 250 x 250 mm Cutting range at 60°: flat 170 x 170 mm Cutting range at 60°: square 170 x 170 mm Cutting range at 60°: round 180 mm Speed range: 40 / 80 m/min Saw blade length: 3650 x 27 x 0.9 mm Machine weight: approx. 640 kg Kwodpfoxaaqtex Af Ist Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large ball bearing turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * With steplessly adjustable feed * Automatic end-stop at end of cut - Manual cutting mode selectable - 2 saw blade speeds - Saw band guide with carbide plates - 1x saw blade - 1x angle stop - Integrated swarf removal brush - Operator control panel – front right - Hydraulic pressure accumulator for saw blade tension * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant system - Operating manual in German

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for managing all functions * Swivel-mounted on the front right - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of saw frame descent - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – incl. digital value display - 2-speed saw blade operation - 1x Bi-metal saw blade - 1x Mitre stop - Chip cleaning brush - Machine base with forklift pockets - Operating manual in German Kodpfx Afsxaa S Re Iowt Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Kodpfoxaatbjx Af Ijwt Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment/features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of saw frame lowering - Carbide saw blade guides - Hydraulic saw blade tensioning incl. digital value display - 2 saw blade speeds - 1 x bi-metal saw blade - Coolant system - 1 x angle stop - Swarf removal brush - Machine frame with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Ksdsxaa H Ijpfx Af Ijwt Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vise width: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided miter cutting up to 60° - Automatic saw bow lowering * Steplessly adjustable feed rate * Automatic shut-off at end of cut - Manual cutting function selectable - 2 blade speeds - Carbide blade guides - 1 saw blade included - 1 angle stop included - Integrated chip removal brush - Control panel at front right - Hydraulic tensioning device for saw blade * With analog pressure gauge (manometer) - Machine base/frame - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing device

Sąlyga: naujas, Cutting diameter 250 mm Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Blade speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t Space requirement approx. ... m MEP Sawing Machine: Saw bow, vice unit, and base made of heavy-duty cast iron Precision angle scale on the cast iron frame Electrical system (with fully labeled wiring and 24 V low voltage system) Control handle IP 55 for manual cycles (if available) Rotating chip removal brush for the saw blade Quick-approach clamping unit with vice Accurate adjustable stops for mitre cuts at 0°, 45°, and 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Wrench, operating instructions, and spare parts order instructions in the user's language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting by automatic head feed via gravity. CCS (Cut Control System) with (A) switch for manual and automatic cut – (B) cutting speed regulation – (C) hydraulic brake with tank – (D) end stop for stopping the blade, also available as an option for previously delivered machines. Kwodpfx Asfg E H Isf Iot Quick-adjust vice Hydraulic converter for blade tension indication Electric coolant pump for cooling and lubricating the saw blade and easily accessible coolant tray above the base On models with pneumatic vice (MA), opening and closing of the vice is performed via a manual valve (optional pedal control available)

Sąlyga: naujas, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 220 mm Cutting range at 90 degrees: square 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO Equipped with semi-automatic dynamic and manual functions, features the MEP-28 control system for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and start of the cycle via hand button). Kwsdpjfg E H Sefx Af Ist Main features: - New, centralized control console mounted on an articulated arm, enabling operation from any working position. - Low voltage control panel: - Polyester membrane keypad with thermoformed, raised keys and control signal display. - Display for: * Diagnostics (messages in user’s language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time taken for each cut * Saw band motor power consumption * Saw band tension * Saw band speed * Numeric display of head position. - IP55 manual 24 V cycle switch handle. - Complete program of all special cutting cycles. - Programming possible for additional special cutting cycles for specific applications. - Newest-generation hydraulic unit, highly efficient with low energy consumption. - Large work surface with turntable on roller bearings, 265 mm with preloaded thrust bearing, mounted. - Dual band speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw arc stroke programmable directly from the control panel, for adaptation to the workpiece material. - Clamping device can be shifted laterally left and right, with quick-release vice. - Manual band tension control via display, using electronic converter. - Machine base with extendable coolant tray. - Electric coolant pump for the cooling and lubrication of the saw band. - Prepared for installation of the minimum quantity lubrication kit for the saw band (optional), in addition to standard coolant system with emulsion oil. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repetitive cutting to same length. - Material support arm with roller, for fixing loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the corresponding user language.

Sąlyga: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Table height: mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Kwsdpfxsfg E H To Af Ist Space requirement: approx. m Operation in CCS version: After the material has been advanced and the vices have been closed, the cutting process is started. The lowering is performed by the saw’s own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch with provision for padlock, switch or speed changer, emergency stop, thermal-magnetic protection, 24V low-voltage system). Electronic band tension converter with display screen. Manual vice with quick-release locking. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for performing cuts of identical length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating manual.

Sąlyga: naujas, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent. Authorized MEP Dealer – Please send us your inquiry! Motor power: 1.5/1.8 kW Vice opening: 335 mm Blade dimensions: 3650x27x0.9 mm Weight: 640 kg Cutting speed: 40/80 m/min Cutting capacity at 0°: 300 mm / 260x260 mm / 330x260 mm Cutting capacity at 45° right: 260 mm / 250x250 mm / 270x200 mm Cutting capacity at 45° left: 200 mm / 180x180 mm / 200x160 mm Cutting capacity at 60° right: 180 mm / 170x170 mm / 170x170 mm Cutting capacity at 60° left: -- Description – MEP Metal Cutting Saw: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting process is initiated. The arm lowers by gravity, counterbalanced by a spring and regulated by a hydraulic brake cylinder. After the cut is completed, the saw arm is manually returned to the loading position for material feed. Kwedpfxjcgbt Rs Af Iet Electrical control panel (labeled wiring, operating status indicator, safety main switch lockable via padlock, selector or speed switch, emergency stop, thermal-magnetic protection, 24V low voltage system) Electronic bandsaw blade tension converter with on-screen display. Manual vice with rapid clamping. Base frame with integrated coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for band cooling and lubrication. Chip removal brush. Adjustable precision stops for consistent cut lengths. Machine designed for pallet truck handling. Bimetal saw blade for solid and structural steel. Toolkit and operating instructions included. Motor: 1.5/1.8 kW 2 speeds: 40/80 m/min Vice opening: 335 mm Bandsaw blade: 3650 x 27 x 0.9 mm Weight: 640 kg Refer to image for cutting data. Further technical details can be found in the attached PDF document.

Sąlyga: naujas, MEP SHARK 281 CCS Metal Band Saw with Semi-Automatic Descent. Item number: SH281CCS Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 375 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24 V low voltage system) - IP 55 switch lever for manual cycles (if equipped) - Rotating chip brush for the saw blade - Rapid-approach closing device with quick-action vice - Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left - Bi-metal saw band 2950 x 27 x 0.9 mm - Includes service tools, operating manuals, and spare parts ordering instructions in the user’s language - SHARK 281 available with manual function; SHARK 281 CCS with manual mode and automatic descent by gravity - CCS (Cut Control System) with: (A) Selector switch for manual and automatic cutting, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for blade stopping; also retrofittable to existing machines - Quick-release vice adjustment - Hydraulic sensor for blade tension display - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the base - Pneumatic vice versions (MA): vice opens and closes via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item number: SH281SXI Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 435 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description Semi-automatic operation: The vice closes and the motor starts, the saw head lowers for the cut, the motor stops, the saw head rises, and the vice opens. Key Features: - New centralized control console on an articulated arm - Latest-generation hydraulic control unit: highly efficient and energy-saving - Base with extendable coolant tray Kwsdocgbp Ijpfx Af Ijt The machine is fully compliant with all CE standards! For additional technical details, please refer to the attached PDF document.

Sąlyga: naujas, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5 / 1.8 kW Jaw opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36 / 72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Ksdpfxjcgbq Ij Af Iewt Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button). Key features: • New centralized control console on a pivoting arm, allowing operator access from any working position • Low-voltage control panel: – Polyester membrane keypad with thermoformed raised buttons and actuation control signal – Display shows: * Diagnostics (messages in user’s language) * Alarms (causes description) * Status of inputs and outputs * Cut counter * Time used for each cut * Saw blade motor current draw * Saw blade tension * Saw blade speed * Numeric display of saw head position – Manual 24V operation switch, IP55-rated • Complete program for all special cutting cycles • Identification of additional special cutting cycles for unique applications • New generation hydraulic control system: powerful and energy-efficient • Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings • Dual blade speeds (36/72 m/min) with control • Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min • Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height • Movable clamping device to the left and right, with quick-release vice • Manual blade tensioning control with electronic readout on display • Base frame with pull-out coolant tray • Electric coolant pump for blade cooling and lubrication • Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system • Chip removal brush • Designed for forklift transport • Length stop for repeat cuts • Material support arm with roller for mounting a loading table • Bi-metal saw blade for solid and profile materials • Tool kit and operating instructions in the user’s language For further technical data, please refer to the attached PDF document.

Sąlyga: naudotas, Gamybos metai: 2013, Funkcionalumas: ribota funkcionalumas, juostinio pjūklo ilgas: 2 950 mm, pjūklo juostos plotis: 27 mm, bendras aukštis: 1 680 mm, bendras plotis: 1 950 mm, padavimo eiga Y ašimi: 500 mm, pjovimo plotis (maks.): 245 mm, bendras svoris: 1 000 kg, pjovimo aukštis (maks.): 230 mm, stalo plotis: 245 mm, stalo ilgis: 2 800 mm, darbinio aukščio: 890 mm, dalies ilgis (maks.): 9 999 mm, reikalingas plotis: 1 950 mm, vietos reikalavimas ilgis: 2 900 mm, reikalingas aukštis: 2 100 mm, tuščias svoris: 1 000 kg, Papildoma techninė informacija pateikiama naudojimo ir priežiūros vadove, kuris perduodamas pardavimo metu. Kilus papildomiems klausimams, galite susisiekti telefonu arba el. paštu. Pagarbiai, Weber Geländersysteme Kwsdsx Dirzspfx Af Iot

Sąlyga: geras (naudotas), Gamybos metai: 2012, Naudota MEP juostinė pjovimo staklė Kjdpfx Asx Uq Smef Iswt Tipas: Shark 452 Hydr. Dvigubas kampo pjovimas Talpa: 450 x 320 mm Pagaminimo metai: 2012 Įskaitant papildomas pjūklus

Sąlyga: naujas, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx.: 2800 kg Space requirement approx.: 2200 x 3200 x 2200 mm Fully automatic bandsaw with dual-column guidance system for series cutting, especially in hard-to-machine materials and solid stock. With this machine, MEP offers you a technologically advanced system built from first-class materials, resulting in an exceptionally robust and torsion-resistant structure. The extremely solid saw frame made of cast iron ensures the necessary stability for impressive cutting results, while the powerful cast iron columns, along which the saw frame glides on pre-tensioned linear guides, guarantee the highest cutting precision, even under maximum load. The modern machine control unit (MEP NC 5.0) offers maximum user convenience and ensures trouble-free operation (monitoring/evaluation/correction in real-time). MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under any conditions. > The control system allows storage of up to 100 cutting programs, each with different quantities and lengths, minimizing programming time for frequently repeated jobs. > The automatically detected start position of the saw head reduces setup time. > The saw head feed, via linear guides driven by hydraulic cylinders with pre-tensioned ball bushings, reduces mechanical vibrations during cutting and provides increased stability. > The automatic alignment of the front saw blade guide head, based on the dimensions of the bars to be cut, reduces processing time. > Saw blade tension is effected by the brushless motor and constantly monitored and automatically maintained at the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and can cut any length. > The vertical roller pair holds and aligns any type of bar or bundle being fed. > The vector inverter enables stepless adjustment of the blade speed from 15 to 100 m/min, allowing cuts on any material. > The motorized chip conveyor can be mounted on either the right or left of the cutting area. FEATURES: Fully automatic control - NC 5.0 -Innovative (Windows CE-based) touch-screen control with additional soft-touch keys for frequent operating functions -USB port -Joystick for manual axis (X-Y) control -Controlled blade descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of preset torque, and precise feed adjustment in mm/min -Adjustment/preselection of continuously variable band speed (m/min) -Saw band tension with band tension monitoring and display on-screen via electronic transducer -Automatic detection of cut start -Large 7" color touchscreen for display and selection of all machine functions and parameter settings, enabling programming within seconds. Detailed display of alarm and error messages -Numerous... Kwodpfxelf Tu Uo Af Iot

Sąlyga: naujas, Model designation Kwodpsgvkglsfx Af Ijt Shark 281 SXI evo