Horizontalūs juostiniai pjūklai - rankiniai - pjovimo diapazonas apvalus 221-299 mm

MEP Shark 281 CCS

Sąlyga: naujas, Juostos pjūklo juostos matmenys: 2950x27x0,9 mm 2 greičiai: 36/72 m/min Spaustuvo atidarymas: 285 mm Pjovimo sritis prie 90 laipsnių: apvali – 250 mm Pjovimo sritis prie 90 laipsnių: kvadratinė – 230 mm Pjovimo sritis prie 90 laipsnių: plokščia – 280x200 mm Pjovimo sritis prie 45 laipsnių: apvali – 190 mm Pjovimo sritis prie 45 laipsnių: kvadratinė – 180 mm Pjovimo sritis prie 45 laipsnių: plokščia – 180x180 mm Pjovimo sritis prie 60 laipsnių: apvali – 120 mm Pjovimo sritis prie 60 laipsnių: kvadratinė – 110 mm Pjovimo sritis prie 60 laipsnių: plokščia – 110x110 mm Bendras galios poreikis: 1,5/1,8 kW Svoris: 375 kg Matmenys: 1700x1000x1650 mm Nsdpfjh Dmh Hex Abrocn Įranga: - Su pusiau automatiniu nuleidimu - CUT CONTROL SYSTEM leidžia pusiau automatiškai nuleisti pjovimo lanką naudojant pjovimo galvos svorį - Nuleidimo greitis reguliuojamas be pakopų. Vienetiniai pjūviai galimi su tolygiu padavimu

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Nsdpfx Aberypmgsrocn Digital display with welding time limitation (optional)

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Njdpfx Absxaa H Iorscn Vise width: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided miter cutting up to 60° - Automatic saw bow lowering * Steplessly adjustable feed rate * Automatic shut-off at end of cut - Manual cutting function selectable - 2 blade speeds - Carbide blade guides - 1 saw blade included - 1 angle stop included - Integrated chip removal brush - Control panel at front right - Hydraulic tensioning device for saw blade * With analog pressure gauge (manometer) - Machine base/frame - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing device

Sąlyga: naujas, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t High-performance mitre band saw for cutting from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (infinitely variable feed control and automatic shutdown at end of cut) Nedpfxexz Hhzs Abrjcn Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with infinitely variable adjustment of lowering speed and setting the cutting pressure via compensating spring - Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel - Quick-release vice - Carbide band guides for maximum cutting precision - Large dimension, adjustable idler wheels made of cast steel - Hydraulic unit for saw band tensioning and monitoring with display on manometer (band tension: 900 kg) - Clearly arranged control panel with all control elements - Electric coolant pump for band cooling and lubrication - Swarf cleaning brush for cleaning the saw band

Sąlyga: labai geros būklės (naudotas), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has barely been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg Ncjdpfx Aou Hanysbron No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: naujas, MEP SHARK 281 CCS Metal Band Saw with Semi-Automatic Descent. Item number: SH281CCS Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 375 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24 V low voltage system) - IP 55 switch lever for manual cycles (if equipped) - Rotating chip brush for the saw blade - Rapid-approach closing device with quick-action vice - Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left - Bi-metal saw band 2950 x 27 x 0.9 mm - Includes service tools, operating manuals, and spare parts ordering instructions in the user’s language - SHARK 281 available with manual function; SHARK 281 CCS with manual mode and automatic descent by gravity - CCS (Cut Control System) with: (A) Selector switch for manual and automatic cutting, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for blade stopping; also retrofittable to existing machines - Quick-release vice adjustment - Hydraulic sensor for blade tension display - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the base - Pneumatic vice versions (MA): vice opens and closes via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item number: SH281SXI Nedpfx Abscgbp Ierjcn Motor Power: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 435 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm Cutting Capacity at 45° left: — Cutting Capacity at 60° right: — Cutting Capacity at 60° left: — Description Semi-automatic operation: The vice closes and the motor starts, the saw head lowers for the cut, the motor stops, the saw head rises, and the vice opens. Key Features: - New centralized control console on an articulated arm - Latest-generation hydraulic control unit: highly efficient and energy-saving - Base with extendable coolant tray The machine is fully compliant with all CE standards! For additional technical details, please refer to the attached PDF document.

Sąlyga: naujas, Cutting diameter 250 mm Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Blade speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t Space requirement approx. ... m MEP Sawing Machine: Saw bow, vice unit, and base made of heavy-duty cast iron Precision angle scale on the cast iron frame Electrical system (with fully labeled wiring and 24 V low voltage system) Control handle IP 55 for manual cycles (if available) Rotating chip removal brush for the saw blade Quick-approach clamping unit with vice Accurate adjustable stops for mitre cuts at 0°, 45°, and 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Nedofg E H Iopfx Abrecn Wrench, operating instructions, and spare parts order instructions in the user's language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting by automatic head feed via gravity. CCS (Cut Control System) with (A) switch for manual and automatic cut – (B) cutting speed regulation – (C) hydraulic brake with tank – (D) end stop for stopping the blade, also available as an option for previously delivered machines. Quick-adjust vice Hydraulic converter for blade tension indication Electric coolant pump for cooling and lubricating the saw blade and easily accessible coolant tray above the base On models with pneumatic vice (MA), opening and closing of the vice is performed via a manual valve (optional pedal control available)

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), A CNC turret punching machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools, is available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet size X/Y: 3000 mm / 1500 mm, max. sheet thickness: 6.35 mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/-0.1 mm, machine dimensions X/Y/Z: approx. 5100 mm / 3200 mm / 2300 mm, weight: approx. 18,000 kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet size X/Y: 3000 mm / 1500 mm, min. sheet size X/Y: 1000 mm / 300 mm, sheet thickness range: 0.8 mm – 6 mm, max. load capacity per pallet: 3,000 kg, max. stack height: 400 mm, max. sheet weight: 170 kg, max. pallets: 9, pallet change time: 25 s, sheet loading time: 18 s, weight: approx. 4,900 kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. Inspection on site is possible. Nodpfx Abowhp N Derjcn

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. Ncjdpfx Aewbh Ifebrsn ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Sąlyga: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Machine No. 14 561-06 Year of Manufacture: 2006 Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Ncsdpfx Asf Ncadjbren Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table