Juostinis pjūklas

FLOTT HBS 250 HA (NEU ab Werk)

Sąlyga: naujas, Gamybos metai: 2025, Material width: 100 mm Material thickness: 15 mm Iasdpfjurni Ujx Af Iel Number of straightening rollers: 9 Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Space requirement: approx. 710 x 920 x 1360 mm Equipment: - 5 driven lower rollers - 4 adjustable upper rollers - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Sąlyga: naujas, Saw blade diameter: 315/350 mm Cutting range at 90 degrees, round: 125 mm Cutting range at 90 degrees, square: 110 mm Cutting range at 90 degrees, flat: 160x90 mm Cutting range at 45 degrees, round: 105 mm Cutting range at 45 degrees, square: 90 mm Cutting range at 60 degrees, flat: 80x100 mm Total connected load: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) Isdpfxsd Iin To Af Isal • For mitre cuts to the right and left up to 45°, end stop at 90° and 45° left • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Taper safety clutch made of hardened steel to protect the saw blades • Large, solid cast baseplate for maximum stability and low-vibration cutting • 2 speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty applications • Automatic cooling directly onto the saw blade • Saw head with double bearing • 24 V safety switch in the handle with restart protection • Length stop, assembly tools NOTICE: Price is without saw blade!!!

Sąlyga: naujas, Swing diameter over bed: 410 mm Swing diameter over cross slide: 240 mm Turning length: 1000 mm Swing diameter in gap: 530 mm Spindle speed: 65 - 1810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.9 x 0.8 x 1.3 m Iaodsm Rlb Nepfx Af Ijl Leadscrew and feedshaft lathe with: - 3-axis digital readout system, fully mounted - Electromagnetic main spindle brake - Automatic feed in longitudinal and facing directions - Safety relay - Micrometer end stop - Coolant system - 3-jaw chuck with 1 set each of outside and inside jaws - German instruction manual.

Sąlyga: naudotas, Mount: MK 4 Iasdob N Ezrspfx Af Iol

Sąlyga: naujas, Hydraulic Punch and Shear Machine SAHINLER HKM 65 Exerted force: 65 Ton Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H) Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm Iasdpfjggbuhex Af Isl NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Sąlyga: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year 2022, condition: new Iedpfxemftv Rs Af Ioal List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables stepless mitre cuts from -45° to +30° (pivot range: 45° to the left, 60° to the right). Technical Data: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min ● Saw blade: 2710 x 27 x 0.9 mm Standard Equipment: ● Powerful band drive ● Stepless feed adjustment from the control panel ● Manual workpiece clamping, movable vice with dovetail guide ● Easy mitre adjustment by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop (without scale) --> Also available in various sizes and configurations!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2020, mašinos/transporto priemonės numeris: PM_1000, Used polishing machine for manual operation. Iodpfx Afsfiugus Isal Drive power: 5.5 kW Polishing discs diameter: 1000 mm

Gamybos metai: 1996, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: xxxx, High-Performance Bench Tapping Machines on T-Slot Table Technical Data: - Tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (swing radius) 2500 mm - Quick-change tool holder, size 2, Ø31 mm Iodpfef Tcy Djx Af Ioal - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required floor space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Sąlyga: naujas, Fastech Horizontal Band Saw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity mm: 360 Flat cutting capacity mm: 510 x 360 Iaodpjg Ekttjfx Af Ijl Square cutting capacity mm: 360 +30° round cutting capacity mm: 360 +30° flat cutting capacity mm: 440 x 360 +30° square cutting capacity mm: 360 +45° round cutting capacity mm: 360 +45° flat cutting capacity mm: 390 x 360 +45° square cutting capacity mm: 360 +60° round cutting capacity mm: 200 +60° flat cutting capacity mm: 200 x 360 +60° square cutting capacity mm: 200 -30° round cutting capacity mm: 360 -30° flat cutting capacity mm: 440 x 360 -30° square cutting capacity mm: 360 -45° round cutting capacity mm: 360 -45° flat cutting capacity mm: 390 x 360 -45° square cutting capacity mm: 360 -60° round cutting capacity mm: 260 -60° flat cutting capacity mm: 260 x 360 -60° square cutting capacity mm: 260 Main drive motor power kW: 3 Hydraulic pump power kW: 0.37 Coolant pump motor power kW: 0.12 Infinitely variable band speed: m/min 20 - 100 Saw blade dimensions mm: 4800 x 34 x 1.1 Worktable height mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double miter saw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital miter angle display

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Iedpfxeuxft Ej Af Ijal Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.