Juostiniai pjūklai - horizontali

BERG & SCHMID GBS 250 Super HA-I Easy

Būklė: naujas, Cutting diameter: 255 mm Fgjdpfxjfn Ands Aaief Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 45°: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45°: round 150 mm Cutting capacity at 45°: square 145 mm Cutting capacity at 60°: flat 63 x 107 - 69 x 90 mm Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70 mm Cutting capacity at 90°: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90°: round 225 mm Cutting capacity at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight approx. 200 kg Fsdpfolb I Dasx Aaijgf Space requirement approx. 1385 x 580 x 890 mm Technical Features: - Hydraulic system for controlled downfeed of the saw head - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise, and swivel components made of cast steel - Steel band guides with ball bearings - Quick-release vise - Front lever for locking the mitre adjustment - Coolant pump with aluminium housing - Large handwheel for easy blade tensioning - Pressure gauge to display band tension (600–1000 kg/cm³) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed control

Būklė: labai geros būklės (naudotas), Gamybos metai: 1982, ULMIA 1710s Table Saw Year of manufacture: 1982 Tilt angle: 45° Cutting length on sliding table: 750 mm Max. saw blade diameter: 250 mm Cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table with angle cutting scale Fgodpfxoufgnzs Aaisf Table size: 1000 x 630 mm

Būklė: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables stepless mitre cuts from -45° to +30° (pivot range: 45° to the left, 60° to the right). Technical Data: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min ● Saw blade: 2710 x 27 x 0.9 mm Standard Equipment: ● Powerful band drive ● Stepless feed adjustment from the control panel ● Manual workpiece clamping, movable vice with dovetail guide ● Easy mitre adjustment by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop (without scale) --> Also available in various sizes and configurations! Fgodpfx Aajmftv Rsief

Būklė: naudotas, Gamybos metai: 2014, bendras ilgis: 1 500 mm, bendras plotis: 1 150 mm, bendras aukštis: 2 400 mm, Svoris: 3 600 kg - Pagaminimo metai: 2014 - Dokumentacija prieinama: Taip - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 441 - Galia [kW]: 3,0 - Spaudimo jėga [t]: 28 - Didžiausias darbo plotis [mm]: 1000 - Stovo atstumas [mm]: 950 - Išsikišimas [mm]: 220 - Užpakalinio atmušimo gylis [mm]: 415 - Transportavimo matmenys: 1500 mm x 1150 mm x 2400 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 3600 kg Fgedpfx Aaexapftsief - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina yra be PVM PVM / Skirtumo apmokestinimas: PVM grąžinamas įmonėms Pristatymas ir įrenginių priėmimas dalinai visada galimi visoje pramonės srityje Lukas van Rossum

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Fsdpomhfrrsfx Aaisgf Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. Electrical and electronic systems are excluded from the warranty, as they have only been function-tested. For machines located outside our North Bavarian sales region, travel costs are to be borne by the customer. Geometric inspection with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as inspected Technically, the machine corresponds to the state of the art at the time of manufacture.

Gamybos metai: 2025, būklė: naujas, – Plate width 710 mm – Back gauge Fgjdsh Ramgjpfx Aaijf – Adjustable stroke

Būklė: geras (naudotas), Gamybos metai: 2003, keliamoji galia: 150 kg, rankos pasiekiamumas: 2 700 mm, Modelis: KR150 Būklė: Naudotas Fsdpfehakfajx Aaiogf Metai: 2003 Valdymo spinta: KRC2 Komplekte: Manipuliatorius + KRC2 valdymo spinta + visi laidų komplektai Prašome susisiekti dėl kainos pasiūlymo ir atnaujinimo galimybių. PLC Merkezi EOOD sandėlyje turime daugiau nei 300 robotų ir prekiaujame KUKA, ABB, FANUC ir Motoman prekių ženklais.

Būklė: naudotas, Gamybos metai: 1979, Pjovimo skersmuo 440 mm Mašinos svoris apie 780 kg Fgedpof Dwa Ujfx Aaisf +++++ Atkreipkite dėmesį, kad įrenginys yra išardytas ir paruoštas pakrovimui. Dėl šios priežasties negalima atlikti demonstracijos įjungus maitinimą ar pagaminti vaizdo įrašo. Mūsų skelbime pateiktos informatyviausios ir aukščiausios kokybės nuotraukos. Deja, papildomų nuotraukų atsiųsti negalime. +++++

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Durchmesserbereich: 99 mm - 180 mm Höhenbereich: 90 mm - 250 mm Fjdpfst Dhv Sox Aaisgf Köpfe: 3 Leistung: bis zu 90 Dosen pro Minute Werkzeugsatz für ca.: 153 mm