Įrankių frezavimo staklės - universalios

DECKEL FP2 LB

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1968, X ašies eiga: 800 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, šilko eigos atstumas: 80 mm, bendras ilgis: 1 000 mm, stalo plotis: 520 mm, stalo ilgis: 1 000 mm, stalo apkrova: 2 000 kg, bendras svoris: 2 500 kg, įėjimo įtampa: 400 V, ruošinio svoris (maks.): 2 000 kg, Siūlome šią atnaujintą DECKEL FP2LB frezavimo staklę, pagamintą 1968 metais. Lrsdsx Sdxzepfx Af Ijg

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Active Heidenhain Digital Readout Complete Overhaul by FPS in 2015, Like-New Condition Technical Data: Lrodpfx Afsu Dm E Hs Ijg - Year of manufacture: 1980, Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2500 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head can be moved 200 mm along the column - Vertical and horizontal quill – SK40 extendable - Clamping system M16 - Weight: approx. 1500 kg Accessories and Equipment: - 3-Axis Active Digital Readout Heidenhain (latest version) - Coolant system - Central lubrication About the Machine: Offered is a Universal Milling Machine Deckel FP3 in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has only seen limited use since. The machine has minimal backlash and all spindle movements operate smoothly. On this later FP3 model, the feed is steplessly adjustable in all three axes, and each axis also features a rapid traverse. A significant advantage is the Active 3-Axis Digital Readout. With the Heidenhain path control, you can input measurements that the machine automatically approaches. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout significantly simplifies and boosts the precision of work. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), DECKEL FP 2 LB įrankių frezavimo staklės iš universiteto, puikiai išlaikytos originalios būklės - 3 ašių skaitmeninė indikacija „ACURITE“ - Poslinkiai X/Y/Z: 795x300x400 mm - Automatiniai padavimai / greitos eigos visose 3 ašyse (18 padėčių) - Veleno sūkiai 40–2000 aps./min (18 padėčių) - Horizontalus ir vertikalus frezavimo įtaisas - ISO 40 įrankio laikikliai - Stalo tvirtinimo paviršius 1000x440 mm - Stalo tvirtinimo paviršius su papildomu stalu 1000x700 mm - Vertikalinė galvutė pasukama su ištraukiama gręžimo pinole - Aušinimo skysčio sistema - Įvairūs įrankių laikikliai - Staklių apšvietimas - Dokumentacija Lodpfx Aox Da Ersf Ierg Matmenys: Ilgis x plotis x aukštis: 2,5x2,4x1,8 m / Svoris 2200 kg Galimi netikslumai ar klaidos dėl įvedimo.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: R0101, X ašies eiga: 800 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 2 000 aps./min, stalo ilgis: 1 000 mm, stalo plotis: 520 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausiam pasiūlymui! Apmokėjimo terminas už įrenginį yra 2025-11-20! Pasiūlymo pateikimas įpareigoja laiku atsiimti tarp 2025-12-01 ir 2025-12-05! TECHNINĖ INFORMACIJA Lredpfexm Scuex Af Ijg Darbo eiga X ašies eiga: 800 mm Y ašies eiga: 300 mm Z ašies eiga: 300 mm Velenas Didžiausias sūkių skaičius: 2 000 aps./min Mažiausias sūkių skaičius: 25 aps./min Veržlės diametras: 40 mm Stalas Stalo plotis: 520 mm Stalo ilgis: 1 000 mm ĮRENGINIO DUOMENYS Matmenys (I x P x A): 2 500 x 2 000 x 1 800 mm ĮRANGA Veržtuvai Papildomas frezavimo stalas (stalo matmenys: 700 x 240 mm) Didelis mašininis spaustuvas (žandų plotis: 200 mm)

Sąlyga: naudotas, Gamybos metai: 2001, spaudimo jėga: 60 kN, darbinio tūrio: 224 cm³, įpurškimo slėgis: 2 224 juosta, bendras svoris: 3 350 kg, darbo valandos: 60 790 h, sraigtinio konvejerio skersmuo: 18 mm, Min. mould installation height: 15 mm_Max. platen clearance: 575+ mm Payment terms: 100% before collection of the machine, strictly net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: - Clamping force: 60 t Opening stroke: 425 mm Min. mould installation height: 350 mm Max. mould installation height: - Tie bar spacing (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centres (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner controllers: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating power: 3.6 kW Pump drive power: 11.0 kW Total connected load: Motor + heater Total weight: 3,350 kg Dimensions L x W x H: 4.0 x 1.5 x 2.1 m Lsdpfsh Tk Rvox Af Ierg

Sąlyga: naudotas, X-axis travel: 800 mm Lodpfjbq Dbasx Af Ijrg Y-axis travel: 300 mm Z-axis travel: 400 mm Spindle speed: 40 - 2,000 rpm Spindle taper: ISO 40 Feed rate: 10 – 500 mm/min Spindle motor: 2.2 kW

Sąlyga: geras (naudotas), Friedrich Deckel FP 2 LB Tool Milling Machine Lsdpegyw S Tofx Af Ierg Accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is distinguished by its extremely rigid base and is designed as a travelling column machine. This means the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree slant bed. Once the universal table is removed, this design allows for direct clamping and machining of V-type engine blocks with a 90-degree cylinder angle, such as American V8 engines. Additionally, the long travel distance of 800 mm is advantageous for this application. Technical Data: Deckel Universal Milling Machine FP 2 LB Digital readout: 3-axis Heidenhain digital display X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Tool holder: SK 40 draw thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of speeds: 18 Table type: Universal swivelling/tilting table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vice: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 Further new and used items can be found in our shop! International shipping costs on request!

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Ljdpfx Aer En Dysf Ierg Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 0736, x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm Work table: 1000 x 440 mm Spindle speeds: 40 - 2000 RPM Number of speed steps: 18 Feed range: 10-500 mm/min Number of feed steps: 18 Rapid traverse: 1.50 m/min Spindle taper: SK40 Total power requirement: 2.2 kW Lodpfx Afjcxxyho Iorg Machine weight approx.: 2 t Space requirement approx.: 1.57 x 1.68 x 1.85 m Universal tool milling machine in travelling column design, suitable for particularly heavy and large workpieces, equipped with swiveling vertical head and quill (stroke 85 mm), horizontal spindle with quill (stroke 120 mm), slant bed with fixed, precision angle table, automatic feeds in 3 axes, chip tray, coolant pump and system, separate control cabinet. The machine is in good condition.

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Ljdpfx Asuqackef Ijrg