Ekscentrinės presai, vienos kolonos, daugiau nei 100 t pirkti naudotą (140)

Būklė: naujas, Gamybos metai: 2025, pramušama skylė stalo paviršiuje: 220 mm, stalo plotis: 800 mm, stalo ilgis: 1 100 mm, eigos reguliavimas: 180 mm, spaudimo jėga: 200 t, cilindro skersmuo: 60 mm, galia: 15 kW (20,39 AG), perforavimo jėga: 200 t, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Presses are mechanical presses powered via an eccentric mechanism, designed for cold working operations such as punching, cutting, and forming with dies. Thanks to their high production speeds and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for series production. Key Advantages - Stable stroke performance and high repeatability for serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with centralized automatic lubrication - PLC control with dual-hand/foot pedal operation for production-ready use Areas of Application - Cold cutting and punching operations - Cold extruding applications - Metal forming with dies Hfsdpovtyx Isfx Ab Sod - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-sided slide guideways • Spheroidal cast connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic centralized grease lubrication • Pneumatic clutch and brake combination • Conforms to CE safety directives • Double-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse run motor • Compliant with occupational safety regulations • CE standard compliance ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolsters • Coil decoiler, straightener, and feeder • One die set to desired specifications • 8-sided slideways ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Table–ram distance: 500 mm Slide–table clearance: 600 mm Distance between side walls: 510 mm Ram (slide) adjustment: 130 mm Approximate press width: 1900 mm Approximate press depth: 2400 mm Approximate press height: 3000 mm Front anchorage dimension: 920 mm Side anchorage dimension: 1420 mm Table bore diameter: Ø240 mm Table size: 680×1000 mm Die mounting hole diameter: Ø60 mm Ram size: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: For any changes to the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, gerklės gylis: 320 mm, stalo plotis: 920 mm, stalo ilgis: 660 mm, spaudimo jėga: 160 t, cilindro skersmuo: 55 mm, galia: 15 kW (20,39 AG), perforavimo jėga: 160 t, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C Frame Eccentric Press 150 Ton is specifically designed for stable performance in cold forming applications. With its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers reliable, series-production-ready performance. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal control Applications - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-point slide guidance • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts manufactured from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Compliance with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand/finger safeguarding system • PLC control system • Two-hand/foot pedal control system • Mechanical lock system • Emergency reverse motor function • Compliance with occupational health and safety regulations Hsdpfx Aovtywdeb Sofd • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic lock system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies to required specifications • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table–ram distance: 500 mm Slide–table opening: 540 mm Distance between uprights: 500 mm Ram adjustment (shut height): 120 mm Approx. machine width: 1600 mm Approx. machine depth: 2280 mm Approx. machine height: 2750 mm Front anchorage dimension: 840 mm Side anchorage dimension: 1300 mm Table bore diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approx. weight: 7100 kg Note: Please inform us for any modification requests on the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, pramušama skylė stalo paviršiuje: 220 mm, stalo plotis: 750 mm, stalo ilgis: 1 000 mm, eigos reguliavimas: 140 mm, spaudimo jėga: 130 t, cilindro skersmuo: 55 mm, perforavimo jėga: 130 t, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Ready-to-use production with PLC control + dual hand/foot control Application Areas - Cold cutting and punching operations - Cold-breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel welded body • Four-sided guided slideway • Spheroidal graphite cast connecting rod and gear housing • Crankshaft and transfer shafts from 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain hand-finger protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor function • In compliance with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die per requested specification • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Table–slide distance: 500 mm Slide–table gap: 510 mm Distance between uprights: 450 mm Ram adjustment (shut height adj.): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchor dimension: 790 mm Side anchor dimension: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Hfjdpfxsvtyvge Ab Ssd Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Floor to table height: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is produced by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, stalo plotis: 670 mm, stalo ilgis: 950 mm, pramušama skylė stalo paviršiuje: 180 mm, galia: 7,5 kW (10,20 AG), perforavimo jėga: 100 t, cilindro skersmuo: 45 mm, eigos reguliavimas: 120 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates by means of the force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is a highly efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance tailored for serial production environments. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready usability with PLC control + dual hand/foot pedal operation Typical Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-way guided slide • Spheroidal cast connecting rod and gear bushings • Crankshaft and drive shafts made of 4140 quenched & tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual solenoid safety valve • Manually adjustable stroke • Finger–hand safety protection with light curtain • PLC control system • Dual hand/foot pedal operation Hfsdpfevtx Inex Ab Sed • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulations compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of custom dies (on request) • Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bed–ram distance: 400 mm Slide–table clearance: 465 mm Distance between side frames: 420 mm Ram adjustment (shut height adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchor span: 710 mm Side anchor span: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please notify us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, hidraulinio cilindro reguliavimas: 200 mm, bendras aukštis: 6 300 mm, stalo plotis: 1 320 mm, stalo ilgis: 1 000 mm, eigos ilgis: 400 mm, atstumas tarp stulpų: 1 000 mm, galia: 38 kW (51,67 AG), Триминг преса с усилие 400 тона, марка ERFURT, Германия, модел PKZ 400. Hodpfx Aslnlpxob Ssfd

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, ERFURT 250t Press Hfedpev Hqacsfx Ab Sod

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector Hfodpfx Abonxh T Ro Sod * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 160P - C-frame Eccentric Press - 160 Tons (1600kN) TECHNICAL DATA: * Capacity: 160 tons (1600kN) * Stroke rate: 55 strokes/min (adjustable) * Distance between table and slide: 500 mm * Stroke adjustment: 0 - 172 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 800 x 1100 mm STANDARD SPECIFICATIONS: * Equipment complies with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bushings of grade SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed helical gear transmission running in oil * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) Hfedonyh S Rspfx Ab Sjd * 6-point slide guidance with used oil collection system * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic overload protection can be retrofitted to standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feed, loading and unloading systems (decoiler, straightener, pneumatic or servo feeder) * Customized machine

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) Hodpfxjnyh Sio Ab Sjfd TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Strokes per minute: 55 SPM (adjustable) * Distance between table and slide: 500 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bearings, quality SnBz-12 * Pneumatic clutch-brake unit * Fully enclosed, helical gear drive lubricated with oil * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-way slide guide with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable strokes per minute via AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic protection can be retrofitted to standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pieces) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feed and automation systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-built machine

Būklė: naudotas, Presskraft: 200 t Hubweg: 40–180 mm Hübe pro Minute: 32 Oberer Tischgröße: 630 x 500 mm Unterer Tischgröße: 900 x 800 mm Technische Merkmale: LUFTKUPPLUNG Leistung: 15 PS ABMESSUNGEN: Höhe: 3.000 mm Hsdpfx Abo Dvi Ue Sefd Breite: 1.000 mm Länge: 2.750 mm Gewicht: 14.000 kg Neues elektrisches System

Būklė: naudotas, Presskraft: 160 t Hub: 20–140 mm Hedpsc Nt Akefx Ab Sofd Hublänge: 50 mm Obere Tischgröße: 600 x 330 mm Untere Tischgröße: 1.000 x 700 mm Leistung: 15 kW Gewicht: 10.000 kg

Būklė: naudotas, SCHULER TYP 315-400 DRUCKKRAFT: 315t Hsdpfx Aborgp N Ho Sofd HUBLÄNGE: 30–160 mm HÜBE PRO MINUTE: 36

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1999, TECHNICAL SPECIFICATIONS: Press Model: T50 CNR4 Year of manufacture: 1999 Nominal force: 500 kN Weight: 3,500 kg Strokes per minute: 90 Maximum insertions per minute: 41 Operating air pressure min./max.: 4÷5.5 bar Stopping time: 0.117 s Safety distance: 187 mm Energy: 2000 kJ Adjustable stroke min./max.: 8÷100 mm Ram adjustment: 70 mm Top dead center adjustment: 280 mm Maximum extraction stroke: 30 mm Worktable surface: 770x530x58 mm Ram table size: 450x300 mm Shank diameter: 45 mm Distance from center: 270 mm Maximum die size: 450x300 mm Upper die weight: 84 kg Voltage: 400 V Supplied complete with user manual and CE conformity Six (6) months warranty, excluding electronic parts NEW COMPONENTS INSTALLED: • Motor bearings; • Flywheel bearings; • Motor belts; • Clutch plates; • Front safety guards; Hsdpfxjqbtc Ns Ab Sefd • Worktable refurbished by CNC machine; • Pedal control.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial Number: 160/0/46/00 Year of Manufacture: 2000 Nominal Force: 1600 kN Weight: 13,800 kg Nominal Strokes: 55 spm Min./Max Strokes: 10/55 spm Max. Insertions: 17 spm Clutch Pressure Min./Max: 4.0–5.5 bar Maximum Stopping Time: 0.22 s Safety Distance: 355 mm Energy (at 15% nominal strokes): 14,500 kJ Min./Max Stroke: 10/200 mm Slide Adjustment: 110 mm High TDC Adjustment: 430 mm Maximum Ejection Stroke: 60 mm Working Table Dimensions (H x D x W): 78/750/1250 mm Ram Dimensions (D x W): 600/850 mm Shank Diameter: 60 mm Distance from Center: 370 mm Max Die Dimension: 600/850 mm Max Die Head Weight: 344 daN Operating Air Pressure: 5.5–6 bar Stop Position: TDC (Top Dead Center) Voltage: 380 V Frequency: 50 Hz Auxiliary Voltage: 24 V NEW COMPONENTS INSTALLED: • Safety guards with safety interlocks • Clutch plates • Clutch pins and bushings • Flywheel bearings • Flywheel oil seals • Stroke change nose • Balancer cylinder seal kit • Air pressure gauges • Electrical panel • Inverter (variable speed drive) • Motor • Motor pulley Hedpowaiw Sofx Ab Sefd • Work table refurbished on CNC machine Supplied with six (6) months warranty, technical documentation, and CE conformity. Electrical panel warranty: twelve (12) months.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1985, veikimo valandos: 200 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 38754, spaudimo jėga: 250 t, Ši lakštų lankstymo mašina buvo sumontuota nauja 1989 m. ir naudota tik 200 valandų, nuo to laiko daugiau nebuvo eksploatuojama. Mechaninės dalys visiškai veikia ir yra puikios būklės, tačiau elektros valdymo skydas reikalauja remonto. Jėga: 250 mp (metrinės tonos) Darbinio paviršiaus ilgis: 5600 mm Hedoykl Iaopfx Ab Sefd Darbinio paviršiaus plotis: 400 mm Darbinio paviršiaus aukštis: 100 mm Svoris: apie 37 000 kg Spaudimo matmenys (Ilg x Aukšt x Pl): 5700 x 3150 x 5200 mm