Beutler pirkti naudotą (10)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Pressing Force: 2,000 kN Table Area: 2,300 x 1,100 mm (W x D) Pass-through Opening: 2 pcs., 700 x 300 mm Distance Between Columns: 2,460 mm Ram Clamping Surface: 2,300 x 1,100 mm Lateral Passage: 740 mm Installation Height: 550 mm (stroke down, adjustment up) Stroke Rate: 30 – 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram Adjustment: 150 mm (motorized) Main Drive: 30 kW Weight: approx. 27,500 kg Version/Features: • Siemens + Beckhoff controls • 8-way slide guides • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromotive stroke adjustment Hsdpfx Acev T Anleuofn • Siemens + Beckhoff controls • Visualization via Beckhoff panel • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks and 4 cam outputs • Ram with 20 mm central slot • Hydraulic die clamps on table and ram • Hydraulic rollblocks for tool change Strip Feeding Line by Kemmerich, consisting of: Uncoiler Type: V 5000 A – SH – 600 – S Load Capacity: 5,000 kg Strip Width: 100 – 600 mm Expansion Range: 470 – 520 mm Coil Outside Diameter: 2,000 mm • Auxiliary motor drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear end plate and 3 plug-in side arms at the front • Hydraulic hold-down roller, motor-driven, laterally adjustable via handwheel • Coil car (stationary, uncoiler moves hydraulically), lifting height 770 mm with 4 limiting rods Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 – 600 mm Strip Thickness: 0.5 – 4.0 mm Straightenable Cross-section: 1,200 mm² Number of Rolls: 9 pcs. Roll Diameter: 50 mm Number of Feed Rolls: 2 pcs. Feed Roll Diameter: 100 mm Speed: 3 – 25 m/min Features: • Rolls hardened, ground, and hard-chrome plated • Drive for lower straightening rolls and feed rolls via gear drive • Motorized roll stand adjustment via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rolls can be opened by 100 mm • Feed rolls pneumatically releasable • Lateral strip guide at infeed with handwheel and leadscrew • Outfeed roller basket and loop bridge • Loop control by ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roll Roll Feed Strip Width: max. 600 mm Features: • Rolls hardened, ground, and chrome plated • Driven by gearmotor • Upper roll pneumatically releasable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional Features: • Pneumatically pivoting loop bridge between straightener and feed • Safety fence around complete system • Uncoiler and straightener on common base frame • Various spare rolls for the straightener The complete system can still be inspected under power at the seller’s site!

Sąlyga: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Hodovuun Topfx Acuofn Clear space between tie rods: 940 mm Side opening: 900 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4868, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard base: 95 kg Customs tariff code: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard hole in plate, diameter: 50 mm Hole in table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (connecting rod extension): 70 mm Ram base area (width x depth): 105x90 mm Hfodow T S Tzjpfx Acuen Required power: 1/3 HP Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Clearance between frame uprights: 170 mm Table area, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Clearance between frame uprights: 160 mm Table area, width x depth: 270x300 mm Except for error or omission, all technical data are provided without obligation.

Gamybos metai: 2003, Sąlyga: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Hodpfx Acsra Rr Eeujfn Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Sąlyga: naudotas, Gamybos metai: 1983, Technical Details: Pressing force: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table size: 900 x 640 mm Throat depth: 355 mm Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Ram clamping surface: 500 x 415 mm Hfsdpfx Acsu Nfi Ueusn Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions (LxWxH): 1.9 x 1.6 x 3.1 m The press is supplied without machine control panel / switchgear cabinet. (Optional installation possible) Complete separate electric drive for 3x 380 Volt, 50 Hz Belt and ram guards PRESSMATIC friction clutch and brake unit

Sąlyga: naudotas, Gamybos metai: 2007, Pressure: 63 t Stroke: 8 - 120 mm Hfodpfjwc U Inox Acuen Stroke rate: 40 - 120 strokes/min Throat depth: 280 mm Clearance between frame walls: 325 mm Shut height: 440 mm Table size: 820 x 580 mm Pass-through hole in table: 200 mm Table height above floor: 830 mm Ram surface: 470 x 340 mm Ram adjustment: 100 mm Drive power: 4.0 kW Weight: 5.2 t Space requirements (W x D x H): 1.3 x 1.8 x 2.8 m Approved for manual insertion in accordance with CE standards Equipped with infinitely variable drive, pneumatic clutch/brake combination, light barrier (Sick), hydraulic overload protection, pneumatic ram counterbalance, manual stroke adjustment, manual ram adjustment, central lubrication, fixed table, two-hand and foot operation

Gamybos metai: 1972, Sąlyga: naudotas, Pressure: 16 t Reach: 185 mm Stroke: 8-60 mm Strokes per minute: 140 spm Ram adjustment: 50 mm Table size: 500x340 mm Ram surface: 230x155 mm Through-hole in table: Ø160 mm Table height: 800 mm Through-hole in table: Ø35 mm Machine weight: approx. 1.5 t Space requirements: approx. 1200x1200x2000 mm Hsdpfx Acop Sycdouefn Rotary wedge clutch Machine number: 3857 Height-adjustable table

Sąlyga: naudotas, Gamybos metai: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Hfjdpeu Nfizjfx Acusn Throat depth: 355 mm Ram bore: Ø 36 mm Table area: 900x640 mm Ram adjustment: 150 mm Ram clamping area: 500x415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Machine dimensions (LxWxH) approx.: 1.46x1.58x2.57 m Transport dimensions (LxWxH): 1.9x1.6x3.1 m The press is supplied without machine control cabinet/electrical control unit. (Optional installation possible) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guarding Friction clutch and brake unit PRESSMATIC

Sąlyga: naudotas, Gamybos metai: 2003, Spaudimas 63 t Eiga 10 - 120 mm Eigos dažnis 40 - 120 /min Pasiekimas 280 mm Anga tarp korpuso sienelių 325 mm Įrengimo aukštis 430 mm Stalo plotas 820 x 580 mm Anga stalo viduryje 200 mm Stalo aukštis nuo grindų 830 mm Stūmoklio plotas 470 x 340 mm Stūmoklio reguliavimas 100 mm Pavaros galia 4,0 kW Svoris 5,20 t Užimama vieta apie 1,3 x 1,7 x 3,1 m Hfodpfx Ajvzxttecujn PRESAS IŠKART PARUOŠTAS NAUDOJIMUI! Leidžiama naudoti rankoms (pagal CE) Su bepakopiu pavaros reguliavimu, pneumatinės sankabos / stabdžių deriniu (NAUJINTA 2025), šviesos užtvara (Sick), hidrauline perkrovos apsauga, pneumatinio stūmoklio svorio subalansavimu, rankiniu eigos reguliavimu, rankiniu stūmoklio reguliavimu, fiksuotu stalu, valdymas dviem rankomis ir kojiniu jungikliu.

Sąlyga: naudotas, Gamybos metai: 1995, Spaudimas: 63 t Išsikišimas: 260 mm Eiga: 12 - 120 mm Eigos dažnis: 30 - 130 / min Atstumas tarp stalo ir stūmoklio, didelė eiga, viršuje reguliuojama: 495 mm Stalo matmenys: 800 x 560 mm Stalo praėjimo anga: 220 mm Stalo aukštis nuo grindų: 800 mm Tarpas tarp rėmo sienelių: 270 mm Stūmoklio paviršius: 450 x 360 mm Hsdpfx Acevut Ewouofn Stūmoklio reguliavimas: 120 mm Variklio galia: 5,5 kW Svoris: 5,0 t Užimamas plotas (IxPxA): 1,8 x 1,5 x 2,7 m Leidžiama naudoti tik automatinėje eksploatacijoje pagal CE standartą Su bepakopiu reguliuojamu pavaros varikliu, pneumatine sankabos / stabdžių kombinacija, mechanine stūmoklio perkrovos apsauga, fiksuotas stalas, dviejų rankų valdymas Galima apžiūrėti veikiančią mūsų sandėlyje