Automatinio štampavimo preso stendas

BEUTLER NOVA C 1000

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Pedpfjwf Dpgjx Acaepw Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ Ppedswbknbspfx Acaow ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Būklė: naujas, Gamybos metai: 2026, Mini kranas ant vikšrinės važiuoklės TB5000 Mini kranas ant vikšrinės važiuoklės, skirtas vidaus ir lauko darbams. Maksimali keliamoji galia: 2400 kg. * prietaiso valdymas radijo bangomis – vairavimas, darbas, pėdų praskėtimas * Dvigubo krano maitinimas - dyzelinis ir elektrinis 230 V * maksimali keliamoji galia - 2400 kg Podpfx Ajibqraecajpw * standartinė apsaugos nuo perkrovos sistema * didžiausias horizontalus diapazonas virš 11 m * keturi hidrauliniai ilgintuvai + 1 rankinis prailginimas * didžiausias vertikalus diapazonas virš 13 m * 4 hidrauliškai nuleidžiamos atramos * svoris apie 2200 kg * ūgis apie 195 cm * plotis apie 88 cm * aktyvi ranka 16 laipsnių Papildoma, pasirenkama įranga: *paieškos kabliukas * Hidraulinė gervė 990kg * Maitinamas ličio jonų akumuliatoriumi * pagalvėlės atraminėms pėdoms * hidraulinė FLY JIB Galima pasirinkti jūsų pasirinktą spalvą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, paskutinio kapitalinio remonto metai: 2004, 4 aukštų CRM Froehling valcavimo galva Froehling yra žinomas prekės ženklas, garsėjantis patikimumu ir tvirtumu valcavimo srityje. 4-auštų valcavimo galva su lenkimo funkcija ir ritiniais. Techninės charakteristikos: Gamintojas: FROEHLING (Vokietija) – Kapitalinis remontas 2004 m. Pjdpfsg Ryqkex Acaopw Apdirbamos medžiagos: aliuminio lydiniai, žalvaris, varis, mažai anglies turintis plienas Juostos plotis: 282 mm (iki 300 mm) Juostos storis: 0,15 – 2 mm Ritės dydis: vidinis skersmuo – 400 mm, išorinis – 1500 mm Maksimalus valcavimo greitis: 400 m/min Darbiniai volai: skersmuo – 130 mm, stalas – 340 mm Atraminiai volai: skersmuo – 390 mm, stalas – 335 mm Komplektacija: išvyniojimo ir suvyniojimo ritės Daug atsarginių darbinių ir atraminių volų komplektų Parduodama EXWORKS demontuota ir pakrauta ant sunkvežimio. Paruošta apžiūrai potencialiems pirkėjams. Dėl papildomos informacijos prašome susisiekti. Pateikite savo pasiūlymą, jei susidomėjote – tikrai rasime bendrą sprendimą.

Būklė: naujas, The perfect layer for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface and forms a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and pre-treated. Oils, contaminants and other impurities are removed to ensure a clean surface. This is crucial for the powder to bond effectively with the substrate, resulting in a robust and long-lasting finish. Components of a Powder Coating System A powder coating system typically consists of various components and equipment necessary for the application and curing of powder coatings. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Pjdeun Sd Uepfx Acaopw Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Supply System The powder supply system comprises a hopper or container to store the coating powder. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pretreatment Equipment Pretreatment systems prepare the substrate before the powder coating is applied. This includes processes such as cleaning, degreasing, rinsing, and surface treatment, to ensure good adhesion and durability of the coating. 🧼 Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder coating to melt, flow and cure to form a durable finish. The oven typically consists of a conveyor system or racks for transporting coated parts through the oven chamber. 🔥 Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a solution for powder coating? Seeking a custom powder coating solution? We specialize in delivering tailored powder coating solutions to meet your individual requirements. Whether you have specific color requirements, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements and let us develop a custom powder coating solution for you. 📞 Contact us today!

Būklė: naujas, Gamybos metai: 2026, Completamente automatisk skjæring av mellomstore til store aluminiumprofiler med brukervennlig automasjon. Legg ned hvilken som helst aluminiumprofil — maskinen vil automatisk oppdage og skjære den i henhold til jobblistene med høy-presisjon servomotor for nøyaktig materialposisjonering. Excel-jobblister kan importeres via WIFI for effektiv og enkel håndtering av store skjærelister. For hver aluminiumprofil du legger ned for skjæring, uansett lengde, måler en lasersensor profilens lengde. En kraftig optimaliseringsalgoritme kalkulerer i sanntid den beste skjærerekkefølgen for å minimere svinn. Maskinen skjærer automatisk henhold til den optimerte listen uten stopp. Du trenger ikke gjøre noen innstillinger – bare fortsett å legge inn nye aluminiumstokker. Et raskt og enkelt alternativ til dobbelthodede gjærsager. Tast inn (eller importer) ønskede lengder og vinkler, og trykk START. Maskinen produserer kontinuerlig vinkelskårne deler, raskt og nøyaktig. • Fullautomatisk skjæredrift med stangmating og tilpassing av lengde • Enkelt brukergrensesnitt for automatisk drift – legg inn jobb og start skjæring på sekunder • Forenklet del-, batch- eller store Excel-jobblister for skjæring • Bundlet/flerstang-skjæring og telling • Fjerninnlasting av Excel-jobblister via WIFI med avansert datamapping • Fullt justerbar kutte- og fremføringshastighet for maksimal produktivitet • Automatisk optimaliseringsmodus med laserbasert lengdemåling og kuttoptimalisering for minimalt svinn (opsjon) • Automatisk etikettutskrift for deler med data fra jobbliste (manuell påføring, opsjon) • Direkte materialmerking inline uten operatørinngrep (opsjon) • Strekkode- eller QR-kodeutskrift/skanning for jobbinntasting (opsjon) • Automatisk servo-posisjonering av sagvinkel opp til ±75° (opsjon) Særlig godt egnet for: • Produksjon av vinduer og dører • Produksjon av profilerte aluminiumskonstruksjoner i gjæringsvinkel • Produksjon av aluminiumskonstruksjoner • Komposittprodukter • Produksjon av persienner, solskjerming og møbler • Salg av aluminium til detaljmarkedet Modell: A550 Lengde: 6 m Lineærenhet: ProfiStop Alpha Materiallengde: 4680 mm Skyvekapasitet: 20 – 40 kg Programvare: Optimiser Ppedpfsf Ekn Dex Acajw KVALITETSMASKINER PRODUSERT I AUSTRALIA.

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Ppjdpscxxx Rofx Acasw Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2010, veikimo valandos: 34 616 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1244801, bendras svoris: 13 500 kg, rotoriaus skersmuo: 500 mm, peilių skaičius: 125, rotoriaus ilgis: 1 800 mm, įvesties srovės tipas: Oro kondicionierius, sietų perforacija: 30 mm, VECOPLAN Shredder Type VAZ 1800F, after complete overhaul, ready for operation. The machine is fully functional, with the following parts replaced: cutting system (knife holders, knives, counter-knives, rotor hardfacing), vibration isolators, slide rails, screen, gearbox oils, as well as the electrical, hydraulic, and pneumatic systems. Ppsdpovx Rtaefx Acaew

Būklė: labai geros būklės (naudotas), Mažai naudotos automatinės TC, TU, TZ profilių gamybos staklės, Skirtos gaminti, valcuoti TC, TU, TZ profilius iki 1.5 mm metalo storio. Techninė specifikacija Pagaminta: Estijoje Reguliuojamas profilio aukštis: 100 – 250 mm Profilio kraštinė: 50 mm Profilio kraštinės užlenkta: 15 mm Minimalus valcuojamo lakšto storis: 1 mm Maksimalus valcuojamo lakšto storis: 1.5 mm Atstumas tarp volų: 300 mm Podpfx Acsx Sx R Sjajpw Staklių matmenys: 900 x 4000 mm Staklės neturi giljotinos, perforavimo volų. Valdymas paprastas, dviem knopkem. Jei turėsite daugiau klausimų, mielai atsakysime.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, veikimo valandos: 67 h, spaudimo jėga: 1 600 kN, varžto skersmuo: 45 mm, bendras svoris: 5 900 kg, valdiklių gamintojas: ARBURG, valdiklio modelis: SEOLOGICA direct, Šis 3 ašių "Arburg Allrounder 520S 1600-400" buvo pagamintas 2021 m. Jo sraigto skersmuo siekia 35-45 mm, o prispaudimo jėga - iki 1600 kN. Mašinoje yra nuėmimo robotas ir korpusas su filtravimo įrenginiu FilterFanUnit, užtikrinančiu švarias operacijas. Ji idealiai tinka tiksliam plastiko apdirbimui, jos formų užspaudimo aukštis yra 250 mm, o atstumas tarp plokščių - 825 mm. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Papildoma įranga • Aušinimo vandens jungtis: Maksimali temperatūra: 30 °C, min: 1,5 bar | DN 25 Mašinos privalumai Techniniai mašinos privalumai • Termoplastinis cilindras: 45 mm, labai atsparus dilimui • CrN danga (sraigtas ir atbulinis vožtuvas) • Standartinė sraigtinė jungtis, kvadratinė geometrija • Atviras 45 mm antgalis • Didesnis laikymo slėgio siurblys • Tiesioginio valdymo sistema "Selogica • 2 technologijos lygis, servovaldymas su 2 valdymo siurbliais • Ežektoriaus slėgis valdomas P/Q • Nuolatinis alyvos aušinimas ir filtravimas • Valdoma purkštuko kontakto jėga, programuojama (1-asis įpurškimo įrenginys) • Prispaudimo plokštelių rinkinys, centrinis 125 mm • Mašina pakelta 100 mm (padidinti vibracijos elementai) • 8 programuojami skaitmeniniai įėjimai / išėjimai • 6 elektrinės formos šildymo valdymo grandinės • 1 papildoma šildymo valdymo grandinė (purkštuko arba adapterio) • 4 rankiniu būdu reguliuojamos aušinimo grandinės • Valdomos mašinos aušinimo grandinės • aXw Control ScrewPilot (1-asis įpurškimo įrenginys) • Vandeniu aušinama valdymo spinta • Sustiprinta sraigtinė jungtis su daugialinijine geometrija • Įpurškimo greitis su rampos funkcija (F90302 = 1) • Automatinis šildytuvo budėjimo režimo perjungimas • Garso slėgio lygis: 70 db(a) | ± 3 Papildoma informacija • Sraigto skersmuo: 45 mm Pedpfjx D E Dyex Acaspw • Įpurškimo slėgis (maks.): 1580 bar • Šūvio svoris (maks. g PS): 15,5 g: 232 g • Šildymo galia 9,7 kW | 5 zonos • Grynasis mašinos svoris: 5900 kg