Nė Vienas pirkti naudotą (14 615)

Sąlyga: naudotas, Technical details: Pressure: 63 t Frame opening: 900 mm Strokes per minute: approx. 75 spm Ram adjustment: 80 mm Adjustable stroke range: 3–100 mm Table size: 900 x 600 mm Throat depth: 310 mm Installation height: max. 350 mm Drive power: 11 kW Voltage: 380/220/24 V Frequency: 50 Hz Operating pressure: approx. 150 bar Oil capacity: 500 l Safety distance: 150 mm Pass-through opening in table: 200 mm Total power requirement: 11 kW Machine weight approx.: 4.0 t Space requirements approx.: L: 1.8 x W: 1.8 x H: 3.7 m DIFFERENTIAL TRAVEL PRESS HIGH-SPEED PRESS - High-performance high-speed press, C-frame design - Pneumatic connection: approx. 5 bar Redpfxeu Nfnke Ab Asn WITHOUT control cabinet!

Sąlyga: naudotas, Technical details: Pressing force: 2.3 t Redpfju Nfwlsx Ab Ajn Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Good condition.

Sąlyga: naudotas, Gamybos metai: 1980, Technical Details: Pressure: 400 t Stroke: 40 - 140 mm Strokes per minute, continuous: 32 Throat depth: 400 mm Installation height, min/max: 450/590 mm Redpfx Absu N A Uue Asn Ram adjustment: 125 mm Table size: 1250x750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100mm - With drawing device, force 250 kN, stroke approx. 83mm - Operation via control panel No UVV (accident prevention regulations) As is (i.D.).

Sąlyga: naudotas, Gamybos metai: 1980, Techninės detalės: Slėgis: 160 t Eigos ilgis: 20-160 mm Įtraukos gylis: 400 mm Stūmoklio reguliavimas: 120 mm Redpeu N A U Iofx Ab Ajn Smūgių skaičius: 71 smūgis/min Įrengimo aukštis: stalas/stūmoklis viršuje: 720 (esant 160 mm eigai) mm Įrengimo aukštis: stalas/stūmoklis apačioje: 560 (esant 160 mm eigai) mm Stūmoklio paviršius: 900 x 660 mm Praėjimas tarp stulpų: 500 x 450 mm Stalo matmenys: Ilgis x Plotis x Skersmuo: 1200 x 750 x 100 mm Bendras galios poreikis: apie 23,0 kW Mašinos svoris apytiksliai: apie 15,0 t Mašinos matmenys apytiksliai (Ilgis x Plotis x Aukštis): 2,7 x 1,5 x 3,45 m Valdymo spintos matmenys (Ilgis x Plotis x Aukštis): 2,0 x 0,65 x 2,15 m Valdymas per valdymo pultą/pjedestalą/pedalą ir rankinį valdymo įrenginį. Presas siūlomas pagal dvi parinktis. 1 parinktis: Parduodama esamos būklės, neprijungta, neišsami, neveikianti. 2 parinktis: Presas bus pilnai atnaujintas – visi komponentai bus pakeisti, atnaujinti ir patikrinti. Presas bus paruoštas naujam naudojimui. Prašome užklausose dėl šio preso nurodyti pageidaujamą pasiūlymo variantą!

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Load capacity: 10 t Span: 21,000 mm Lifting speed: 6.3 m/min Creep (fine lift) speed: 1.0 m/min Rodpfx Absv N Ib Nj Aen Rope diameter: 14 mm Connected load: 15.5 kW SINGLE-GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane carriage: Designation RF 400; Type KBF 112 A8/2, travel speed 12.5 / 50.0 m/min, and type KBF 80 A4, travel speed 2.5 m/min. Size of the 16 wheel sets: Ø 200 mm Trolley (main lift): EKDH 525 H20 KV3-4/1 F6; Type KBF 80 A8/2; speed 20.0 / 5.0 m/min; 4 wheel sets: Ø 160 mm Hoisting gear: Type KBH 160 B2/12; lifting height 10,000 mm; with braking and traversing runner; lifting speed (main lift 6.3 m/min and creep lift 1.0 m/min) Single hook size 5.0 Rope Ø 14 mm; rope length 46 m; mechanism classification FEM 1 AM Operation via pendant pushbutton control with DST Special feature: Traversing section with locking mechanism and branch tracks Additional bridge cranes with a 21 meter span are available for sale.

Sąlyga: naudotas, Gamybos metai: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through hole in table: 4x Ø62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram surface: 450 x 850 mm Rsdpfow D Awmex Ab Ajn Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Approx. dimensions (LxWxH): 2.1 x 1.4 x 3.4 m

Sąlyga: naudotas, Gamybos metai: 1995, Technical Details: Redpfx Abewm Ivts Asn Load capacity: 3.2 t Lift: - mm Span: 5300 mm Lifting speed: 5.0 m/min Rope diameter: 6.5 mm Creeping speed: 0.80 m/min Electrical controls: yes Max. hook height: 6 m Hook travel: 6000 mm Total power requirement: 13.6 kW Approx. machine weight: 5.3 t Transport dimensions (LxWxH): approx. 6.8 x 2.35 x 1.5 m (with 4 pallets) Crane classification: DIN 15018 H2 B3 Crane end carriage: - Drive unit number: GE 1348 - Mechanism group: 1Am - 4x wheels, wheel diameter: 100 mm - Micro-travel speed: 5.0 m/min - Travel speed: 20.0 m/min - Disc brake Trolley drive: - Speed: 20.0 / 5.0 m/min - Power: 0.12 / 0.03 kW Hoisting unit Abus - FDB GM 800.3H06/S12873E – Load capacity: 3200 kg - Speed: 5.0 / 0.80 m/min - Power: 3.20 / 0.45 kW (50% ED) - Hook travel: 6.0 m - Rope Ø 6.5 mm Floor operation via pushbutton control, electric As per specification.

Sąlyga: naudotas, Technical details: Pressing force: 25 t Clearance between uprights: 360 mm Stroke: 500 mm Installation height, table/ram at top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Rodpfeu U D I Rjx Ab Asn Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control console (single-hand operation possible in setup mode) Continuous and single stroke modes TÜV certified until 05/2024 i.D. *

Gamybos metai: 1992, Sąlyga: naudotas, Technical Details: Load capacity: 12.5 t Span: 9000 mm Lifting speed: 5 / 0.8 m/min Rope diameter: 14 mm Lifting height (max. hook position): 10,000 mm Total power requirement: 13.6 kW Approx. machine weight: 5.2 t Dimensions (L x W x H): Bridge: approx. 10.3 x 2.2 x 2.3 m (3.15 t) Dimensions (L x W x H): End carriage No.1: approx. 4.38 x 0.8 x 0.7 m (1.01 t) Dimensions (L x W x H): End carriage No.2: approx. 4.38 x 0.8 x 0.7 m (0.99 t) Dimensions (L x W x H): Accessory pallet: approx. 4.2 x 0.8 x 0.4 m (0.16 t) Crane classification according to DIN 15018 H2B3 Crane chassis: DEMAG designation RF 400; Type KBF 100 A8/2; travelling speed 12.5 / 50 m/min; wheel diameter Ø 200 mm (16 pcs.) Rodpsvbh Rhofx Ab Ajn Trolley main hoist EKDH 532 H20 KV3-4/1 F6; Type KBF 90 A8/2; travelling speed 5 / 20 m/min; wheel diameter Ø 160 mm (4 pcs.) Hoist DEMAG DH5 32; lifting height 10,000 mm; braked with traversing runner; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety catch Rope Ø 14 mm; Rope length: 46 metres; mechanism group 1Bm Bridge Running gear and electric conductor rail Pendant control and radio remote control The crane is stored dismantled. *

Sąlyga: naudotas, Gamybos metai: 1986, Technical details: Pressure: 63 t Stroke rate: 65 / 130 strokes/min Throat depth: 315 mm Ram adjustment: 60 mm Redpsu N Dafsfx Ab Asn Ram stroke: 10 - 105 mm Distance table / ram: 335 mm Clearance between uprights: 355 mm Clamping plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Approx. machine weight: 5.9 t Approx. machine dimensions LxWxH: 1.42 x 1.8 x 2.6 m Press equipped with a tilting frame (25°) and combined single and stroke safeguard (overload protection). Available operating modes: Single stroke by foot pedal (slow/positioning mode) and/or by hand control (slow) Continuous stroke by foot pedal (slow and fast) and/or by hand control (slow and fast)

Sąlyga: naudotas, Techninės detalės: Redou Nfg Hspfx Ab Ajn Spaudimas: 90 t Iškyša: 320 mm Smūgių skaičius: 90 smūg./min Įrengimo aukštis: Stalas/stūmoklis viršuje: apie 380 mm Stūmoklio reguliavimas: maks. 65 mm Stūmoklio paviršius: 600x55 mm Tvirtinimo plokštė ant stalo: 800x640x80 mm Pereinimas: 260x160 mm Eigos reguliavimas: 60 fiksuota mm Bendras galios poreikis: 5,5 kW Mašinos svoris apie: 4500 kg Reikalinga erdvė apie: I:1,8xP:0,82xA:2,42 m - Vienkartinis/pastovus eigos režimas - Atliktas reguliarus patikrinimas, restauruota 2010 m. - Šiuo metu be valdymo skydelio, be valdymo sistemos, be suslėgto oro bako

Sąlyga: naudotas, Gamybos metai: 1983, Technical Details: Pressing force: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table size: 900 x 640 mm Throat depth: 355 mm Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Ram clamping surface: 500 x 415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Rjdpeu Nfi Uofx Ab Asn Transport dimensions (LxWxH): 1.9 x 1.6 x 3.1 m The press is supplied without machine control panel / switchgear cabinet. (Optional installation possible) Complete separate electric drive for 3x 380 Volt, 50 Hz Belt and ram guards PRESSMATIC friction clutch and brake unit

Sąlyga: naudotas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Redsvc Awxepfx Ab Ajn Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation

Sąlyga: naudotas, Gamybos metai: 1969, Techninės detalės: Slėgis: 55 t Redpfx Aboxu Dwms Asn Gylio ilgis: 250 mm Eigos dažnis: 120 eigų/min Įrengimo aukštis (stalas/kumštis viršuje): 380 mm Kumščio reguliavimas: 55 mm Lakštinės medžiagos storis per einamąją eigą: 2,25 mm Kumščio eigos diapazonas: 6 - 90 mm Bendras galios poreikis: 8,8 kW Mašinos svoris apie: 2,75 t Matmenys I x P x A: 1,4 x 1,2 x 2,2 m

Sąlyga: naudotas, Techninės detalės: Spaudimas: 160 t Iškyša: 760 mm Stūmoklio eiga: 32...140 mm Atstumas tarp stalo ir stūmoklio: 400 mm Stūmoklio reguliavimas: 100 mm Eigos dažnis: 50 eigų/min Stalas: 760x1000x95 mm Pralaidumo anga stale: 400x350 mm Stūmoklio tvirtinimo paviršius: 630x850 mm Tvirtinimo plokštė: 760x1010x92 mm Bendras galios poreikis: 15 kW Apytikslis mašinos svoris: 6,2 t Mašinos matmenys (IxPxA): 2,9x1,2x3,4 m Valdymo spintos matmenys (IxPxA): 0,8x0,45x2,1 m Rsdpfxeu Nfhqo Ab Aon Valdymas per dviejų rankų valdymą Mašiną galima demonstruoti gyvai. i.D. *

Sąlyga: naudotas, Gamybos metai: 1991, Technical specifications: Rjdpfeu Nfp Iox Ab Aon Pressure: 40 t Installation height: Table/ram upper position: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Machine dimensions (LxWxH) approx.: 2.3 x 1.45 x 2.40 m The press features a welded frame and is designed according to static calculations. (Information provided by manufacturer) The pump unit is equipped with a three-stage pump system (high pressure pump, low pressure pump, and control pump). Additional technical data: - Ram plate dimensions (W x D): 900 x 500 mm - Pin hole in ram: Ø 40 x 75 mm - Hydraulics: Tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min. - Overrun distance: 7 mm - Overrun time: 58 ms - Single stroke and automatic cycle - Light barrier (can be overhauled as an option) Two-hand control and/or control panel

Sąlyga: naudotas, Gamybos metai: 1960, Technical Details: Pressure: 10 t Throat depth: 255 mm Rodeu Nfudepfx Ab Aon Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height (table/ram up): 630 mm Installation height (table/ram down): 230 mm Table clamping surface: 420 x 400 mm Table through-hole: 220 mm Ram clamping surface: 200 x 200 x 65 mm Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. (LxWxH): 1.1 x 0.5 x 2.1 m

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Rsdpfju Nvgdsx Ab Aen Load capacity: 2.0 t Lifting height at highest hook position: 2.3 m Hook travel: max. 3000 mm Wheelbase: 520 mm Total power requirement: 2.3 kW MONORAIL system with electric trolley incl. pendant control Crane with girder and electrified rail: - Double T-beam 200 x 200 mm, length approx. 10,100 mm, travel distance 9,000 mm - Hoist, steel, capacity 2000 kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, gauge 200 mm, axle distance 520 mm, chain hoist, hook - Pendant control panel - Various mounting brackets

Sąlyga: naudotas, Technical details: Pressing force: 100 t Installation height (table/ram top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Redpfx Aovc Ax Njb Aon Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size: 750 x 560 x 90 mm Table opening (diameter): Ø 26 mm Ram clamping surface (WxD): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Machine weight approx.: 5.5 t Approx. machine dimensions (LxWxH): 1.8 x 1.2 x 3.2 m

Sąlyga: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Rjdpjvuun Tjfx Ab Aen Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm

Sąlyga: naudotas, Gamybos metai: 2007, Pressure: 63 t Stroke: 8 - 120 mm Stroke rate: 40 - 120 strokes/min Throat depth: 280 mm Clearance between frame walls: 325 mm Shut height: 440 mm Rjdpowc U Insfx Ab Ajn Table size: 820 x 580 mm Pass-through hole in table: 200 mm Table height above floor: 830 mm Ram surface: 470 x 340 mm Ram adjustment: 100 mm Drive power: 4.0 kW Weight: 5.2 t Space requirements (W x D x H): 1.3 x 1.8 x 2.8 m Approved for manual insertion in accordance with CE standards Equipped with infinitely variable drive, pneumatic clutch/brake combination, light barrier (Sick), hydraulic overload protection, pneumatic ram counterbalance, manual stroke adjustment, manual ram adjustment, central lubrication, fixed table, two-hand and foot operation

Sąlyga: naudotas, Gamybos metai: 1978, Pressure 050 t Reach 250 mm Stroke 8 - 120 mm Strokes per minute 100 /min Distance table/ram, large stroke at top, adjustment at top 400 mm Rjdpevut E Dofx Ab Aon Table size 650 x 515 mm Through hole in table 115 mm Table height above floor 790 - 1020 mm Table adjustable 230 mm Ram surface 390 x 180 mm Ram adjustment 70 mm Drive power 2.0 kW Weight 2.6 t Space required (W x D x H) 1.1 x 1.4 x 2.2 m Only approved for use with safety tools or fixed guards in accordance with German accident prevention regulations (UVV) with motor, flywheel clutch, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot pedal operation Can be inspected in running condition at our warehouse

Sąlyga: naudotas, Gamybos metai: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Redpfx Ajvut Ncob Ajn Gap between side frames: 1000 mm Shut height: 615 mm Table size: 1400 x 880 mm Table opening: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Space requirement approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual feeding operations in accordance with German accident prevention regulations (UVV). Features include pole-changeable motor, pneumatic clutch/brake combination, hydraulic ram overload protection, pneumatic ram weight compensation, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation. The machine can be inspected under power at our warehouse.

Sąlyga: naudotas, Gamybos metai: 1977, Spaudimas: 80 t Eiga: 8 - 112 mm Eigos dažnis: 65 /min Iškyša: 345 mm Atstumas tarp korpuso sienelių: 500 mm Įrengimo aukštis: 472 mm Stalo paviršius: 840 x 610 mm Stalo pralaidumo anga: 280 / 315 mm Rjdpfx Abovut Npe Aon Stalo aukštis nuo grindų: 800 mm Stūmoklio paviršius: 650 x 410 mm Stūmoklio reguliavimas: 71 mm Variklio galia: 13,5 kW Svoris: 6,10 t Reikalinga vieta: apie 1,5 x 1,9 x 3,0 m Leidžiama rankiniam užtaisymui pagal Vokietijos nelaimingų atsitikimų prevencijos taisykles (UVV) Su poliusų perjungiamu varikliu, pneumatine sankabos/ stabdžio kombinacija (Ortlinghaus), mechanine stūmoklio perkrovos apsauga, rankiniu eigos reguliavimu, varomuoju stūmoklio reguliavimu, fiksuotu stalu, varomąja centrine tepimo sistema, dviejų rankų valdymu.

Sąlyga: naudotas, Pressure 25 t Stroke 500 mm Throat depth 355 mm Installation height 800 mm Table surface 500 x 500 mm Table height above floor 700 mm Ram area 250 x 250 mm Drive power 7.5 kW Weight 2.1 t Space requirement approx. 1.45 x 0.9 x 2.55 m (LxWxH) Through hole in table 180 mm Permitted only for safe tools or fixed guard according to German Safety Regulations (UVV) With oil-hydraulic drive, upper and lower stroke limit, manual lever Rjdpfxevzxq Sj Ab Asn As is, as stands, WITHOUT commissioning, in given condition