Vienos kolonos presas - hidraulinis

WMW Zeulenroda PYTE 2.5x150

Sąlyga: naudotas, Technical specifications: Pressure: 2.5 t Reach: 155 mm Max. ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram advance speed: 0.08 m/s Ram return speed: 0.32 m/s Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Approx. machine weight: 500 kg Ksdsu Nfv Uspfx Af Isdg Approx. machine dimensions (LxWxH): 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations.

Gamybos metai: 2020, Sąlyga: naujas, DESCRIPTION The so-called half-water is produced in the demineralised water station using ion exchange technology. Ksdpfofz Naksx Af Iodg The station consists of 3 columns: - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Sąlyga: naudotas, TECHNINIAI DUOMENYS - Atstumas tarp centrų: 600 [mm] Kodpeuhbywjfx Af Iedg - Centrinės aukštis: 175 [mm] - Stalo orientacija: 11 [°] UNIVERSALUS ŠLIFAVIMO DISKO LAIKIKLIO VERŽLIARAKTIS - Kairiojo šlifavimo disko matmenys: 400 x 50 x 127 [mm] - Dešiniojo šlifavimo disko matmenys: 225 x 20 x 76,2 [mm] - Variklio galia: 3 [kW] - Veleno greitis: 1500 / 1700 / 2200 - Šlifavimo disko laikiklio veleno orientacija: 270 [°] DETALĖS LAIKIKLIO VERŽLIARAKTIS - Detalės laikiklio veleno orientacija: 360 [°] - Veleno greitis: 20 - 400 [aps./min] - Vidinis kūgis: Morse 5 - Variklio galia: 0,9 [kW] PRIEŠVELENIS - Vidinis kūgis: CM4 - Pinolės eiga: 30 [mm] MATMENYS - Užimamas plotas: 2580 x 1680 [mm] - Aukštis: 1670 [mm] - Svoris: 2200 [kg] PRIEDAI - FISCHER vidinis gręžimo velenas: 14.000 [aps./min]

Gamybos metai: 1969, Sąlyga: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Kedpjqzkdmjfx Af Iedg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Kdsdpfxourw Uyj Af Ijg Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Z-axis / Cross travel: Kdedpfxow Dvkae Af Ijg - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Documentation included

Sąlyga: naudotas, Gamybos metai: 2012, X eiga: 1 035 mm Y eiga: 560 mm Z eiga: 510 mm CNC valdiklis: HEIDENHAIN TNC620 Stalo dydis: 1 200 x 560 mm Maks. stalo apkrova: 1 000 kg Veleno tvirtinimas: SK 40 Veleno apsisukimai: 10 000 aps./min Veleno variklio galia: 13 kW Bepakopis padavimas: 20 000 mm/min Greita eiga: 25 m/min Įrankių keitiklis: 20 pozicijų Aušinimo sistema: vidinis aušinimas 20 bar Darbinė įtampa: 400 V Bendras galios poreikis: 17 kVA Staklių svoris: apie 4,1 t Užimama vieta: apie 2,55 x 2,30 x 2,25 m Drožlių transporterio matmenys: 3,90 x 0,95 x 1,60 m - Gamyklos Nr.: 1539000377A - Mašinos veikimo laikas: 21 689 h - Veleno veikimo laikas: 9 021 h - Valdymas: Heidenhain TNC 620 - Elektrinis rankenėlė - Drožlių transporteris - Vidaus aušinimas 20 bar Ksdpow A Spvsfx Af Ijdg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2014, keliamoji galia: 180 kg, rankos pasiekiamumas: 2 900 mm, We at Binici MB GmbH have additional industrial robots available in-house. Kdjdjwxxzwepfx Af Isg All our robots are fully functional and come with complete accessories. We are happy to assist you with professional advice.

Sąlyga: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle taper internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Kodpfx Asu Uu S Tef Iedg Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on table Change gears

Sąlyga: geras (naudotas), Wheel diameter – max. 180 mm Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Total power requirement 3 kW Machine weight approx. 3 t Good condition, change gears, etc. Kdjdouayw Sspfx Af Ijg Year of manufacture approx. 1964