Vienos kolonos presas - Hidraulinis - Tiesinimo presas

WMW Zeulenroda PYTE 2.5x150

Sąlyga: naudotas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Machine weight approx.: 0.5 t Hfsdsu Nfwlepfx Af Ieb Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Good condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1973, Funkcionalumas: visiškai funkcionalus, Sharpening range: 7.0 - 1.5 mm Hfjdpfx Aoh U A Sfsf Isb Number of calibers: 16

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. Hodpefxyhfofx Af Isfb In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas,

Sąlyga: naudotas, Gamybos metai: 1981, mašinos/transporto priemonės numeris: 9, Case Press and Joint-Setting Machine Schmedt PräForm HHS 20 Year of manufacture: 02/1981 - Serial No. 09 Book height: 100 - 520 mm Block width: 120 - 400 mm Hsdpsrmul Dofx Af Iefb Block thickness: 8 - 100 mm Output: approx. 150 units/hour Air supply: 6 bar Electrical connection: 230V / 50Hz / 2.0kW Online video inspection possible via Skype-Video We would be pleased to welcome you on-site – more machines in stock Immediately available – Can be inspected Stock location: Emskirchen / Nuremberg – Testing possible

Sąlyga: naujas, Gamybos metai: 2023, OMC PL 105 LC 30/13 Water Heated Veneer Press Hfsdpoiypzlefx Af Isb Working area: 3000 x 1300 mm Opening width: 400 mm 6 cylinders, 85 mm diameter Total pressing force: 105 tons Maximum heating temperature: 85°C Logic control system Machine operation via touch panel: readings of temperature, pressing force, shelf opening time, loading area calculator, gluing process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Gamybos metai: 1988, Sąlyga: naudotas,

Gamybos metai: 1985, Sąlyga: dilaminuotas dirbtuvėje (naudotas), REFORM type AR 10 model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Control system: Modicon 6-stage magnetic control Magnet size: 1000 x 300 mm Hfjdpfx Aod E Np Ejf Ijb Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Grinding motor feed: Infinitely adjustable from 0.01 mm to 0.1 mm Hydraulic oscillation drive New supply cables between machine and control cabinet

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8292, šlifavimo ilgis: 3 100 mm, bendras plotis: 1 500 mm, bendras ilgis: 5 100 mm, bendras aukštis: 1 800 mm, šlifavimo plotis: 200 mm, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 1 000 kg, įėjimo įtampa: 400 V, šlifavimo veleno greitis: 1 800 aps./min, aušinimo siurblio galia: 100 W, šlifavimo veleno variklio galia: 1 100 W, bendras svoris: 2 500 kg, šlifavimo disko skersmuo: 200 mm, šlifavimo ratuko plotis: 20 mm, stalo aukštis: 200 mm, stalo ilgis: 3 100 mm, stalo plotis: 200 mm, valdymo spintos plotis: 400 mm, valdymo spintos ilgis: 1 200 mm, valdymo spintos aukštis: 1 500 mm, Nauja mašina, vis dar originalioje pakuotėje! Hfjdex Ezu Topfx Af Ieb

Gamybos metai: 1984, Sąlyga: naudotas, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective Hfedpfx Afed Hp Tze Isb - Pneumatic-hydraulic press - Stroke: 50 mm - Clear distance between columns: 850 mm - Table size: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg