Deckel Fp 4 Ma pirkti naudotą (692)

Sąlyga: naudotas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 34338 Year of manufacture: approx. 1965 Tjdpjic R I Refx Ablsd Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.0 and 1.5 kW, pole-changeable Power supply 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, Type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gearbox stages - Power feed on X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on vertical milling head 60 mm - Angle table, swivelable, rotatable, and tiltable - Freestanding control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg Good condition

Gamybos metai: 1990, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, rotary range C: 360°, spindle speed: 6300rpm, power: 12kW, tool stations: 40, tool holder: SK40, feed rate: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11. Includes chip conveyor and Knoll PF 50 coolant system, year of manufacture: 1989. On-site inspection is possible. Todpswtg Ibofx Abljd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2102-2783, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 DRO in very good condition. Technical data: * Year of manufacture: 1985, Machine No. 2102-2783 * Rotary/tilting/swivel table * Spindle speed: 40 – 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake * Travels X/Y/Z: 300/160/340 mm * Vertical milling head adjustable on spindle carrier by 100 mm * Vertical quill * Tool clamping system SK40/S20x2 * Weight approx. 800 kg Accessories and features: * 3-axis digital readout Heidenhain TNC113 * Coolant system * Central lubrication * Operating manual, spare parts catalogue Tjdpfop Sqyuex Abled The Deckel FP 1 Aktiv milling machine on offer is in very good condition. All spindles move smoothly and have minimal backlash. All guideways have been disassembled, checked and are in excellent condition. The machine runs very quietly at all speeds. All bellows, wipers, roll covers etc. are very good or new. Oil has been changed. The machine has been thoroughly checked both mechanically and electrically. You are cordially invited to inspect and test the machine and convince yourself of its nearly new condition.

Sąlyga: naudotas, Gamybos metai: 1980, x-axis travel: 300 mm y-axis travel: 160 mm z-axis travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Tjdow A Ap Hspfx Abljd Control: Heidenhain Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement approx. (LxWxH): 1200 x 1100 x 1600 mm - Powered feed on X and Z axes - Röhm vise - Coolant system - Various holders and clamping devices - Operating manual

Sąlyga: geras (naudotas), Įrankių frezavimo staklės DECKEL FP 1 - Eigos X/Y/Z 245x150x340 mm - Standus kampinis stalas 600x210 mm - Įrankio laikiklis MK 4 - Tvirtinimo įvorės laikiklis su įvores rinkiniu - Apsisukimų diapazonas 95–1900 aps/min / 12 pakopų - Pavaros X ir Z ašyse - Horizontalus / vertikalus frezavimo įrenginys - Vertikalaus galvos pinolės poslinkis apie 60 mm - Vertikali galva gali būti pasukama +/- 90° - Staklių kojos Todpfsw I Ty Sex Ablsd - Įvairūs įrankiai, žiūrėkite nuotraukas - Dokumentacija Matmenys: Ilgis x plotis x aukštis 1,1x0,9x1,7 m / Svoris 650 kg Galimi netikslumai ar klaidos aprašyme.

Sąlyga: geras (naudotas), 1 used universal tool milling machine Manufacturer: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: Todpfxsrn I Rzj Ablsd X-travel: 300 mm Y-travel: 160 mm Z-travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2,000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Sąlyga: naudotas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95-1900 rpm, 12 steps Horizontal spindle speed: 60-1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Electrical connection: 380 Volt, 50 Hz - Feed on X and Y axes - Quill travel at the vertical milling head - Fixed angle table - Coolant system with mechanical pump in machine base - Separate control cabinet with cable plug connection Required space (L x W x H): 1100 x 900 x 1600 mm Tododzp T Eopfx Abljd Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Gamybos metai: 1990, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, spindle speed: 6300rpm, feed rate: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control system: Deckel Dialog 11. The monitor and the drive modules for the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation is available. An on-site inspection is possible. Tedpswzbblefx Ablsd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2102-2641, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition and original paintwork. Technical Data: Tjdpfx Abjf E Ilzelod * Year of manufacture: 1985, Machine No. 2102-2641 * Rotary/tilting/swiveling table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed on 3 axes * Rapid traverse on 3 axes * Spindle brake * Travel X/Y/Z: 300/160/340 mm * Vertical milling head, 100 mm adjustable on the spindle carrier * Vertical boring quill * Drawbar system SK40/S20x2 * Weight approx. 800 kg Accessories and Equipment: * 3-axis digital readout Heidenhain TNC113 * Coolant system * Operating manual and parts list The offered Deckel FP 1 Aktiv milling machine is in very good condition. All spindles move smoothly with minimal play. All slideways have been checked and are in excellent condition. The machine runs well at all speeds. All bellows, wipers, roll-up covers, etc. are in very good condition or new. Oil has been changed. Mechanically and electrically tested. You are warmly invited to inspect and test this machine to see the excellent condition for yourself.

Sąlyga: naudotas, Gamybos metai: 1980, x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Tjdpfew A Apyex Abled Tool holder: SK40 Speed range: 40–2,000 rpm Control: HEIDENHAIN Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight approx.: 0.73 t Required floor space approx.: LWH 1200 × 1100 × 1600 mm - Power feed in X and Z axis - Additional swiveling table 600 × 210 mm - Coolant system - Counter bearing for horizontal milling - Various tool holders, clamping devices, and cutters included - Operating manual

Sąlyga: geras (naudotas), Įrankinė frezavimo staklė DECKEL FP 1 su 3 ašių aktyvia skaitmenine indikacija TNC 113 iš mokymo įstaigos - Darbiniai eigos X/Y/Z 300x160x340 mm - Sukimosi greitis 40-2000 aps./min. - Begalinis pastūma visomis trimis ašimis - Greitas perėjimas visomis trimis ašimis - Vertikali galva gali būti perstumta 100 mm - Vertikali - horizontali frezavimo įranga - Įrankio laikiklis ISO 40 - Variklio galia 1,5 / 1,9 kW - Standus kampinis stalas - Drožlių surinkimo vonelė - Aušinimo sistema - Darbo lempa - Dokumentacija Matmenys: Ilgis x plotis x aukštis: 1,3 x 1,2 x 1,7 m / Svoris 900 kg Galimi netikslumai ir klaidos. Tedpfjw Rbxnjx Abljd

Sąlyga: geras (naudotas), Gamybos metai: 1990, 1 used, well-maintained CNC-controlled tool milling machine in travelling column design with CNC path control GRUNDIG Dialog 11 Table size: 1600 x 675 mm Tool holder: SK / ISO 40 Travels: X-axis (longitudinal): 1200 mm Y-axis (cross): 600 mm Z-axis (vertical): 500 mm Table load capacity: 2000 kg Tedpfx Ajhhuf Heblsd Spindle speed range: 20 – 6300 rpm Feed range, stepless: 2 – 10,000 mm/min Rapid traverse in all axes: 10 m/min Quill stroke: 80 mm Drive power 100 % duty cycle: 7.5 kW 40 % duty cycle: 12 kW Machine dimensions (L x W x H): 3600 x 3000 x 2300 mm Machine weight: 6,800 kg Control cabinet dimensions (L x W x H): 1700 x 900 x 1750 mm Control cabinet weight: 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool making, jig and fixture construction, training, and mould making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input with graphical support, milling cycles “contour pocket” for automatic roughing of irregular pockets, also with islands, coordinate system shifting and rotation • Electronic handwheel • RS 232 interface • Swivelling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling device • Full enclosure • Ball screw spindles on all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Gamybos metai: 1982, Sąlyga: visiškai atnaujintas (naudotas), Universal tool milling machine Brand: DECKEL Model: FP 3 Aktiv Year of manufacture: 1982 - overhauled, newly painted Tedpspn Rgvefx Abljd RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M 16 - Central lubrication, manual operation - Coolant system - Operating manual Used, sold as seen The machine is technically in accordance with the standards as of the year of manufacture.

Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), A fully refurbished universal tool milling machine Deckel FP2 from 2019 is available. Travel paths X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Tjdevf Iy Dopfx Abljd

Sąlyga: geras (naudotas), Friedrich Deckel FP 2 LB Tool Milling Machine Accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is distinguished by its extremely rigid base and is designed as a travelling column machine. This means the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree slant bed. Once the universal table is removed, this design allows for direct clamping and machining of V-type engine blocks with a 90-degree cylinder angle, such as American V8 engines. Additionally, the long travel distance of 800 mm is advantageous for this application. Technical Data: Deckel Universal Milling Machine FP 2 LB Digital readout: 3-axis Heidenhain digital display X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Tool holder: SK 40 draw thread S 20 x 2 Milling head type: Vertical milling head Tjdpogyw S Tsfx Abled Speed range: 40 - 2000 rpm Number of speeds: 18 Table type: Universal swivelling/tilting table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vice: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 Further new and used items can be found in our shop! International shipping costs on request!

Sąlyga: naudotas, Gamybos metai: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle mount SK 40 Spindle speeds 40 - 2000 rpm Tedpfewwwr Ejx Abljd Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long milling arbors, various collets, original DECKEL tool cabinet

Gamybos metai: 1968, Sąlyga: naudotas, Deckel milling machine FP1 with 3-axis digital readout 380V Machine no. 37729 120-1900 rpm Travel path X-axis: 300 mm Travel path Y-axis: 150 mm Travel path Z-axis: 340 mm Tool holder: MK 4 with draw thread S 20 x 2 Milling head type: Vertical milling head Table type: Fixed table Todopmrpxopfx Abled Clamping surface: 600 x 210 mm T-slot size: 12 mm Feed X-axis: 290 mm Feed Y-axis: 150 mm Feed Z-axis: 330 mm Weight: 700 kg Deckel milling machine FP1 ID: M100000409

Sąlyga: geras (naudotas), Gamybos metai: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm Travel distances X-axis 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling L/R Todpfxom Uygvs Abled • Fixed angular clamping table • Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. The electrical and electronic components are excluded from the warranty, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Geometric inspection with test protocol Tedpfx Abstdnb Esljd Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with M 16 drawbar thread - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The technical condition of the machine corresponds to the standard of the year of manufacture.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with warranty Geometric acceptance with test protocol Accessories: - 3-axis active digital display Tedpfx Ajchfyfjbled HEIDENHAIN TNC 113 with active function on X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual - used, as seen -

Gamybos metai: 1976, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universal tool milling machine Brand: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop inspected Machine no.: 53426/08 Geometric acceptance with test report Tjdpfx Absflc N Aslod Accessories: - 3-axis digital readout Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Coolant system - Bracket with counter bearing - Operating manual - Used, as seen, however without warranty -

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 Tedpfx Abjr En Dyjled with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Draw bolt thread S 20 x 2 - Central lubrication, electric - Coolant system Tedpfxoh Rv U Eo Abljd - Operating manual - Drill bit grinding device with diamond wheel - used, as seen -

Gamybos metai: 1978, Sąlyga: visiškai atnaujintas (naudotas), Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Tsdjdf E H Ajpfx Ablod Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometrical inspection with test report Accessories: - 3-axis digital readout, FAGOR Innova 30i-M, new - Fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual - used, as seen -

Gamybos metai: 1976, Sąlyga: visiškai atnaujintas (naudotas), Universal Tool Milling Machine Make: DECKEL Model: FP 3 Year of manufacture: 1976 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue Machine no.: 1601 Milling head type: 2027 Milling head no.: 1483 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Centralised lubrication, manually operated - Coolant system - Operating manual -used, as seen- Todpfxjd S Hztj Ablod