Fp2 pirkti naudotą (127)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, x eiga: 400 mm y eiga: 220 mm z eiga: 400 mm Sūkių diapazonas: 40 - 2000 aps./min Sūkių pakopos: 18 Vidaus kūgis: SK40 Verpstės galvos judėjimas automatiškai / rankiniu būdu: 190 / 200 mm Stalo tvirtinimo paviršius: 730 x 240 mm Stalo išilginis judėjimas automatiškai / rankiniu būdu: 390 / 400 mm Stalo vertikalus judėjimas automatiškai / rankiniu būdu: 390 / 400 mm Pašaros diapazonas: 8 - 400 mm/min Hjdpfsxmi Dcex Acujnu Greitas važiavimas: 1200 mm/min Elektroninis skaitmeninis ekranas SONY Sukamasis stalas Plieninė spinta su 5 stalčiais ir įvairia komplektacija, pvz. įvairios atsarginės dalys, įrankių laikikliai, frezos, keičiama lenta

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universalus įrankinė frezavimo staklė Gamintojas: harich (DECKEL) Modelis: B (FP 2), bepakopė atnaujinta su CE geometrinis patikrinimas su bandymo protokolu su garantija Priedai: - 3 ašių skaitmeninė indikacija FAGOR Innova 30i-M - Fiksuotas stalas arba universalus stalas - Vertikalus frezavimo galvutė SK 40 - Centrinis rankinis tepimas - Aušinimo skysčio sistema - Naudojimo instrukcija Hsdjvfdatspfx Acujnu CE ir saugos įranga: - Nauja staklių elektros instaliacija su valdymo spintele - Elektroniškai kontroliuojamas vertikalios frezavimo galvutės gaubtas - Tvirtinimo apsauga su elektrine apsauga - Pavaros variklis su stabdžiu - Valdymo pultas su avariniu stabdžiu, atrakinimo, paleidimo ir sustabdymo mygtukais, pašarų reguliavimo potenciometru - Nauja dokumentacija staklėms ir valdymo spintelei - CE atitikties deklaracija

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, DECKEL FP 2 įrankinė frezavimo staklė su nauju trijų ašių skaitmeniniu indikatoriumi -Labai sklandus veikimas, visiškai veikianti -Naujas trijų ašių skaitmeninis indikatorius -Eiga X/Y/Z 400x200x400 mm -Automatiniai padavimai / greita eiga visose trijose ašyse -ISO 40 įrankio laikiklis -Vertikali / horizontali frezavimo įranga -Vertikali galva pasukama su gręžimo pinole -Kampinis stalas -Įrankių spinta su priedais -Darbo šviestuvas -Dokumentacija Hsdjxn Tpfspfx Acujnu Matmenys: Ilgis x Plotis x Aukštis 1,5x1,7x1,8 metro / Svoris 1500 kg Galimi klaidos ar netikslumai.

Sąlyga: naudotas, Slotting head, slotting attachment suitable for DECKEL milling machine type FP 2 Serial no.: 2211 / 1895 Dovetail width: approx. 76 - 88 mm Hnsdpfx Acewbi Rbouou Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail front edge to gear center: approx. 235 mm Stroke length: max. 80 mm Strokes per minute: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke length adjustable via eccentric adjustment - Driven by the machine's gearbox, within the dovetail guide (same as a standard vertical head) - This slotting attachment is inserted into the dovetail guide in place of the standard vertical milling head (mounting in place of vertical head, milling head) - Drive gear in slotting head: 39 teeth, gear width 16 mm, presumed 20° pressure angle - Slotting head rotatable 360° on flange plate, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a 15° pressure angle on the drive gear DECKEL FP2 + FP3 have a 20° pressure angle on the drive gear

Sąlyga: naudotas, x eiga 390 mm y eiga 200 mm z eiga 390 mm Stalo dydis 775 x 330 mm Veleno tvirtinimas ISO Sk 40 Veleno apsisukimai 40 - 2000 aps./min Pinolės eiga 40 mm Bendras galios poreikis 2,2 kW Staklių svoris apytiksl. 1,4 t Matmenys I x P x A 1,75 x 1,5 x 1,8 m Universali frezavimo staklė - Skaitmeninis ekranas - Drožlių apsauga - Aušinimo sistema - Staklių šviestuvas - Drožlių vonelė Hodpoxfb Hgjfx Acuonu - Staklių kojelės - Naudojimo instrukcija

Sąlyga: geras (naudotas), Boring and milling head for Deckel milling machine Hsdpfx Acov U A S Hsujnu

Sąlyga: geras (naudotas), Gamybos metai: 1976, Deckel FP3 įrankinė frezavimo staklė su 3 ašių Heidenhain skaitmenine indikacija, staklės geros būklės. Standus stalas, SK 40 veleno kūgis, priedai: įvairūs įvorės ir frezavimo velenai, atrama. Gera darbinė būklė. Galima parodyti įjungtas pagal susitarimą. Hnjdpfexbx R Ujx Acueu

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universali įrankinė frezavimo staklė Gamintojas: harich (DECKEL) Modelis: B (FP 2) atnaujinta su CE geometrinis priėmimas su patikros protokolu su garantija Priedai: - 3 ašių skaitmeninis atvaizdavimas FAGOR Innova 30i-M - Fiksuotas arba universalus stalas - Vertikalus frezavimo galvutė SK 40 - Aušinimo skysčio sistema - Valdymo instrukcija CE ir saugos įranga: - nauja staklių elektros sistema su valdymo spinta - elektroniniu būdu stebima uždengimo dangtelis ties vertikalios frezavimo galvutės - griebtuvų apsauginis gaubtas su elektriniu užtikrinimu - pavaros variklis su stabdymo funkcija - valdymo pultas su avarinio stabdymo, atlaisvinimo, paleidimo ir sustabdymo mygtukais - nauja staklių ir valdymo spintos dokumentacija Hnedpsdvdczsfx Acueu - CE atitikties deklaracija

Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), A fully refurbished universal tool milling machine Deckel FP2 from 2019 is available. Travel paths X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Hnjdpfxsvf Iy Dj Acueu

Sąlyga: naudotas, Priešgingnis ir adapteris frezavimo staklėms horizontaliam frezavimui Priešgingnis ir adapteris (priešlaikis) frezavimo staklėms DECKEL (Guolio blokas su kregždės uodegos tvirtinimo adapteriu DECEL FP1 + FP2) Tipas 9570 Kregždės uodegos plotis siauras: apie 72 mm Kregždės uodegos plotis platus: apie 88 mm Kregždės uodegos aukštis: apie 15 mm Ilgis (guolio blokas): 133 mm Hnjdpexcbl Djfx Acuju Plotis (guolio blokas): 50 mm Bendras aukštis (guolio blokas): 105 mm Guolio skylė: Ø 17 mm (su bronzine guolių įvore) Ašių atstumas nuo skylės iki kregždės uodegos: apie 82,5 mm (centrinės ašies aukštis) - Adapteris tinka kregždės uodegai ir tvirtinimo paviršiui, pakilimas 22,5 mm iki 105 mm ašies aukščio Bendras ilgis (kregždės uodegos bėgis): 635 mm Svoris: 3,8 kg labai gera būklė

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1980, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 220 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 2 500 aps./min, Axom visue Universal table 700x240 mm Travels 400x220x400 mm Maximum spindle speed 2,500 rpm Weight 1,400 kg Hjdpev Av I Rofx Acuenu

Sąlyga: geras (naudotas), DECKEL - FP2 with New Three-Axis Digital Readout from Educational Institution - Well-maintained original condition - Travel distances X/Y/Z: 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Spindle speed range: 40–2000 rpm - Automatic feeds on all three axes - Rapid traverse on all three axes - Tool holder ISO 40 - Vertical and horizontal milling arrangement - Tilting vertical head with quill feed - Coolant system Hnodpfjwtbq Dsx Acuju - X-axis ball screw nut "NEW" - Machine feet - Machine vise "RÖHM" - Various tool holders - Chip guard / machine base - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500 kg Subject to errors and omissions.

Sąlyga: geras (naudotas), Gamybos metai: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, and SK 40 spindle taper. Features a long adjustment (swiveling) milling head. Accessories include various collets and cutter arbors, as well as a tailstock support. The machine is in good, operational condition and can be demonstrated under power by appointment. Hjdpfoumclajx Acuenu

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP2 in Special Paint Finish with 3-Axis Sony Digital Readout from UNI!! Technical Data: >> Machine No.: 4547 >> Swivel-Tilt-Rotary Table >> Spindle Speed: 40 - 2000 rpm >> Feed and Rapid Traverse on 3 Axes >> Drive Power: 2.2 kW >> Travel X/Y/Z: 500/200/400 mm >> Equipment: Vertical & Horizontal Spindle >> Vertical and Horizontal Quills extendable – SK-40 >> Drawbar System S20x2 >> Weight approx. 1,100 kg Hodpfx Aewkhvnscuonu Accessories and Features: >> 3-Axis Sony Digital Readout >> Coolant System About the Machine: Offered here is a Deckel FP2 universal milling machine in very good condition. It comes from a government facility and has seen very little use. The Deckel has minimal backlash on the handwheels, and all spindles move smoothly. An oil change has been performed. Mechanically and electrically inspected. The Sony digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power.

Sąlyga: naudotas, Milling Machine Make: DECKEL Model: FP2 Technical Data Manufacturer: DECKEL Model: FP 2 Table size: 700 x 330 mm X-axis travel: 490 mm Y-axis travel: 390 mm Z-axis travel: 200 mm Spindle taper: ISA 40 18 spindle speeds: 40 – 2000 rpm 18 feed rates: 8 – 400 mm/min Motor power: 2.2 kW Hnjdpfx Acsv Uzztsueu Dimensions (approx.): W 1100 x D 1400 x H 1600 mm Weight (approx.): 1,100 kg Equipment • 3-axis digital readout ACU-RITE • Various collets • Accessory package as per photos All information subject to change without notice. A demonstration is possible at any time in our showroom.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, -KOM 3149- Hnjdpfx Acswxxd Sjuju Offered here is a slotting head for an FP2 Deckel milling machine. The slotting head can be rotated 360 degrees on the flange plate. All guideways are in very good condition. The dimensions of the slotting head can be found in the last picture.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 2 Year of manufacture: 1976 – partially overhauled, newly painted RAL 7035 light grey / RAL 7046 tele grey 2 / RAL 5008 grey blue Machine no.: 7138 Milling head type: 2013 Milling head no.: 2013-2856 Warranty: 6 months for single-shift operation from delivery, covering the partially overhauled mechanics by us. Geometric acceptance with test protocol. Accessories: - 3-axis digital readout EASSON ES-8A, as new - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40, long version with drawbar thread S 20 x 2 - Coolant system - Operating manual Hnsdpohqg Tlefx Acuou - used, as seen -

Sąlyga: labai geros būklės (naudotas), Digital display Travel distances X/Y/Z: 400 x 200 x 400 mm Table size: 700 x 330 mm Hnedpjwn Td Esfx Acusu Tool holder: ISO 40 Hydraulic vise Completely overhauled in 2019

Sąlyga: geras (naudotas), Gamybos metai: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm Travel distances X-axis 500 mm Y-axis 200 + approx. 250 mm Hedpfx Ajm Uygvecujnu Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling L/R • Fixed angular clamping table • Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2, Special Coating in Light Grey with New 3-Axis Digital Readout K+C Technical Data: >> Machine No. 5983, Year of Manufacture approx. 1975 >> Fixed angle table (newly refurbished) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Features: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK 40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: Hedpju I Rm Nsfx Acusnu >> 3-axis digital readout K+C, newly installed with manufacturer’s warranty. Display unit: set reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Operating manual for the digital readout >> Coolant unit About the Machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. The machine was completely disassembled and repainted. Oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes working easier and even more precise. You also receive a 1-year warranty on the new digital readout. Take advantage of the opportunity to view and test the Deckel under power on-site. The machine is available immediately.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Travel X-axis: 400 mm Travel Y-axis: 200 mm Travel Z-axis: 400 mm Spindle speed: 25 – 2000 rpm Drive power: 2.2 kW Tool holder: SK 40 with S 20 x 2 drawbar Table type: Fixed box table Hjdpfjvxhywsx Acuonu Clamping surface: 330 x 700 mm Weight: 1250 kg Dimensions: 1600 x 1400 x 1600 mm Paint finish: RAL 6011 reseda green Digital readout: 3-axis digital display Accessories: Coolant tray, further accessories available on request For further information & pricing, please contact us.

Sąlyga: geras (naudotas), Gamybos metai: 1966, Universal milling machine Deckel FP2 -WKG 512- Offered here is a universal milling machine from the manufacturer Deckel, model FP2. Technical Data Manufacturer: Deckel Model: FP2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hedpfx Ajurk Exocuenu Hydraulic vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm – 17.5 mm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 6976 with warranty Geometric acceptance with inspection protocol Accessories: Hnodpfed Tytyjx Acuou - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual - used, as seen -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1978, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a state-run training department. Features a fixed table and ISO 40 spindle taper. Accessories include various collets, milling arbors, and a tailstock. The machine is in excellent, operational condition and can be demonstrated under power by arrangement. Hnjdsv U Rh Nepfx Acusu

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual - Coolant system Hjdpevbifgofx Acusnu About the machine: For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.