Fp3 pirkti naudotą (122)

Sąlyga: geras (naudotas), Gamybos metai: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets, milling arbors, and a tailstock. The machine is in good, operational condition and can be demonstrated under power by arrangement. Hfsdpsu Ezb Ejfx Acusn

Sąlyga: naudotas, x-axis travel 490 / 500 mm y-axis travel 290 / 300 mm z-axis travel 370 / 380 mm Spindle speeds 40 – 2000 rpm Feed rates 10 – 500 / + 1500 mm/min Quill stroke 95.0 mm Table size 420 x 800 mm T-slots 9 x 12 / A 45 mm Motor power 4.0 kW Hfedpfx Acsxabgvsuen Weight 1250 kg Space requirement approx. 1550 x 1800 x 1745 mm from a maintenance workshop (Lufthansa) good / well-maintained condition includes extensive special accessories (!!) Equipment: - Robust / high-performance universal milling machine - Includes HEIDENHAIN digital readout - 1x swivelling angle support table, 420 x 800 mm - 1x T-slotted vertical table (table slide) - 1x DECKEL double swivelling milling head * Swivelable in 2 axes * Extendable quill - Horizontal milling spindle (without counter bearing) - Automatic feeds on X/Z/Y axes * Including rapid traverse, 1,500 mm/min - 1x RÖHM hydraulic vice - Central lubrication - Coolant system - Swivelling machine lamp - Splash guard tray - Separate control cabinet - Drawer cabinet with various accessories * Cutter holders / cutters etc. - 1x indexing head - Operating manual (PDF)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, machine no. 0681 >> Swivel-tilt table (recently overhauled) >> Spindle speeds: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills - SK-40 Hfsdpewkhr Aefx Acuen >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Offered here is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. The bellows are almost all new. The swivel-tilt table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes operation easier and even more precise. Take advantage of the opportunity to view and test the Deckel on site under power.

Gamybos metai: 1976, Sąlyga: visiškai atnaujintas (naudotas), Universal Tool Milling Machine Make: DECKEL Model: FP 3 Year of manufacture: 1976 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue Machine no.: 1601 Hjdpfx Aed S Hztscuefn Milling head type: 2027 Milling head no.: 1483 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Centralised lubrication, manually operated - Coolant system - Operating manual -used, as seen-

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Dear Sir or Madam, We hereby offer milling machines of the type Deckel FP3. Each machine undergoes at least a technical inspection in our workshop and is therefore fully functional. We look forward to your enquiry! Hsdpfx Acsq H Eabsuofn Delivery time: on request Dimensions: 2.00 x 1.60 x 1.90 m (L x W x H) Weight: approx. 1,500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Table clamping surface: 800 x 420 mm Spindle speed range: 40–2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10–500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service commitment to you: - We are a certified master workshop / specialist company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if required, worn parts are replaced in advance - Upon request, we will perform either a complete or partial overhaul of your chosen machine - You are free to choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools, etc., directly with your purchase - Upon request, we can install further accessories such as safety devices, etc., for you - We are also happy to take care of shipping and/or installation on site

Sąlyga: naudotas, Motor power: 3 kW Total power requirement: 3 kW Weight: 1,400 kg Hfodpfx Asv Nq Skjcusn O F F E R We can offer you the following from stock, subject to prior sale and errors: DECKEL Universal tool milling machine with FAGOR 3-axis digital readout Model: FP 3 Year of manufacture Serial number: Table travels: Longitudinal, motor/manual: 490 / 500 mm Vertical, motor/manual: 370 / 380 mm Cross, motor/manual: 290 / 300 mm Fixed angle table 2230: 420 x 800 mm Distance under spindle: 90 – 470 mm Spindle taper: SK 40 18 spindle speeds: 40 – 2,000 rpm 18 feeds: 10 – 500 mm/min Rapid traverse: 1,500 mm/min Spindle drive: 3 kW Total drive: 3 kW – 380 V – 50 Hz Weight: 1,400 kg Accessories / Special equipment: • FAGOR 3-axis digital readout V 300 (glass scales) with advanced features such as chain dimension, absolute measuring, mm/inch switch, etc. • Movable DECKEL universal vertical milling head, swivels ±90° • Original DECKEL tool cabinet with comprehensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacing rings, drive dogs, clamping elements, operating tools, etc. • DECKEL large fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various indexing plates • Additional manual DECKEL universal rotary table Ø 380 mm with direct and indirect indexing, various indexing plates • Coolant device, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production. Please click here for a video of the machine: FP3/4 Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net, upon receipt of invoice We always have a large selection of conventional and CNC milling machines in stock. Please contact us for your requirements!

Sąlyga: naudotas, Technical details: X travel: 600 mm y travel: 300 mm z travel: 360 mm Speed range: max horiz. 40–2000 rpm Spindle taper: vert. / horiz. SK 40 / SK40 Speed range: max permissible 40–2000 rpm Hfsdpfx Acju U E T Iousn Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. LxWxH: 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Heidenhain 3-axis display

Sąlyga: naudotas, Parduodu nuotraukose matomą vokiškos gamybos Deckel FP3A modelio įrankinę frezavimo staklę. Staklė gali dirbti rankiniu, pusiau automatiniu ir automatiniu režimu. Valdymas G kodais. Valdymo tipas: CNC 2102 Deckel. Hsdpexluu Rjfx Acuefn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2309-0121 / 2779 Generalüberholt, X ašies eiga: 1 200 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 400 mm, sukimosi greitis (maks.): 25 aps./min, sukimosi greitis (min.): 2 500 aps./min, Deckel FP3-LV tipo 2309 su aktyvia skaitmenine indikacija Hfedpfx Acsxnyfyjuen Šis senovinis modelis iš 1978 m. 2008 m. FPS buvo pilnai atnaujintas ir atstatytas į kaip naują būklę. Deckel FP 3LV – V reiškia pailgintą X eiga - su 3 ašių Heidenhain skaitmenine indikacija - bepakopis tiekimas 5 - 500 mm/min - standus kampinis stalas 550 x 1400 mm tvirtinimo paviršius - greitas eiga 1500 mm/min + lėta eiga 4 mm/min - vidinis kūgis SK40 su Deckel pjūklo sriegiu S20x2

Sąlyga: geras (naudotas), Gamybos metai: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good, fully operational condition. Can be demonstrated under power by prior arrangement. Hfsdpfx Aceuclbzeujn

Sąlyga: geras (naudotas), Sandėlio numeris: 3012 Gamintojas: Deckel Hfsdpfxsxcille Acujn Mašinos numeris: 3686 Tipas / modelis: FP 3 Eigos x-y-z: 500 - 300 - 380 mm Pinolės eiga: 95 mm Stalas: 650 x 370 mm Sūkių diapazonas: 40 iki 2.000 aps./min Veleno tvirtinimas: SK 40 Padavimas: 10 iki 500 mm/min Galia: 2,2 kW Priedai / įranga: Universalus sukamas, pakreipiamas ir šarnyrinis stalas; Elesta skaitmeninė indikacija Būklė: gera Svoris: 1,3 t Matmenys: 1.500 x 1.800 x 1.800 mm

Sąlyga: naudotas, X-axis travel 500 mm y-axis travel 400 mm z-axis travel 400 mm Control system: Dialog 12 Hfsdpfx Aewxfn Rocujn In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information subject to change and error. Prior sale reserved!

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Active Heidenhain Digital Readout Complete Overhaul by FPS in 2015, Like-New Condition Technical Data: - Year of manufacture: 1980, Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2500 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head can be moved 200 mm along the column - Vertical and horizontal quill – SK40 extendable - Clamping system M16 - Weight: approx. 1500 kg Accessories and Equipment: - 3-Axis Active Digital Readout Heidenhain (latest version) - Coolant system - Central lubrication About the Machine: Hfjdpfeu Dm E Hsx Acuen Offered is a Universal Milling Machine Deckel FP3 in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has only seen limited use since. The machine has minimal backlash and all spindle movements operate smoothly. On this later FP3 model, the feed is steplessly adjustable in all three axes, and each axis also features a rapid traverse. A significant advantage is the Active 3-Axis Digital Readout. With the Heidenhain path control, you can input measurements that the machine automatically approaches. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout significantly simplifies and boosts the precision of work. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric inspection with test report Accessories: - 3-axis active digital readout Hfodsh Rv U Eepfx Acuon HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Draw bolt thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating manual - Drill bit grinding device with diamond wheel - used, as seen -

Sąlyga: geras (naudotas), Gamybos metai: 1998, Machine is dirty Technical condition is good Rotary and swiveling table is installed Hfjdpfx Asvptmkjcusn

Sąlyga: geras (naudotas), Gamybos metai: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good working and operational condition. Machine can be demonstrated under power by appointment. Hfodpfxowg S Nks Acusn

Sąlyga: geras (naudotas), Various Deckel FP3 milling machines are available for sale, all of which are in good condition. A notable feature of this machine is the mounted table, which can be tilted, rotated, or shifted. Purchasing the machine with a "standard" milling table is also possible. The machine has been cleaned and inspected by us. On request, safety devices can be installed for an additional charge. Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feed rates & rapid traverse: on all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices subject to VAT Viewings possible by appointment. Contact us, our team looks forward to assisting you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website. Hedpfxjiz T Exj Acuofn

Gamybos metai: 1990, Sąlyga: geras (naudotas), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1 - FP2 - FP3 - FP4. Individual sale upon request. Hsdpfx Acohvz Iiousfn

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2820-0419, x-travel: 500 mm y-travel: 400 mm z-travel: 400 (340) mm Table area: 710 x 430 mm Spindle speed range: 40 - 4000 rpm Feed range: 2 - 3,600 mm/min Rapid traverse: 4.0 m/min Swivel head +/-: 90° Quill stroke: 80 mm Spindle taper: SK 40 Control: Contour 3 Hfodpfxeh Ra Nis Acujn Total power requirement: 5.5 kW Machine weight approx.: 1,900 kg Space requirement approx.: 2 x 1.4 x 1.8 m CNC-controlled universal milling machine with Dialog 4 control unit, vertical head swivels +/- 90° with 80 mm quill stroke, feeds and rapid traverses on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop safety system, machine lighting, chip splash guard cabin with chip tray, pendant control panel, and electronic handwheel. The machine is in good condition.

Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 1994, mašinos/transporto priemonės numeris: 2803-2194, Universal milling machine Deckel FP3 NC with Deckel Analog 4 control (defective) Technical Data: - Year of manufacture: 1994 - Table diameter: 500 mm - Spindle speed: 40 - 2000 rpm - Drive power: 3 kW - Travel X/Y/Z - Weight approx. 1500 kg Equipment and Accessories: - Deckel Analag4 indicator, Grundig Dialog 4 controller (defective, exact error unknown) About the machine: Offered is a Deckel FP3 NC universal milling machine in good external condition. The spindles move freely. The circular T-slot table is in good condition. Mechanically operational, but the control system is defective. Exact fault is unfortunately unknown. Hfjdou U I Iujpfx Acusn Sale on behalf of a customer, without any warranty, as a source of spare parts.

Sąlyga: geras (naudotas), Gamybos metai: 1980, Deckel FP3 įrankinė frezavimo staklė su 3 ašių Heidenhain skaitmenine indikacija, standus stalas, SK 40 veleno tvirtinimas, priedai: įvairios spaustuvo įvorės ir frezos ašys, laikiklis. Geros darbinės būklės. Pagal susitarimą galima parodyti veikiančią. Hfjdpfx Acoxdr Uxsuen

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1978, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Fully operational condition. Machine can be demonstrated under power by prior arrangement. Hfedpfxeug T Dxj Acuen

Gamybos metai: 1975, Sąlyga: geras (naudotas), Deckel FP3L with adjustable swiveling table, vertical milling head, SK 40 spindle taper, spindle mount S20x2. In good, operational condition. Can be demonstrated under power by appointment. Hfedpfxsildwxj Acusn

Gamybos metai: 2025, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, LSV1293 CNC Alloy Wheel Diamond Cutting Machine | FP32C from 2025 • Capacity: Rims from 12" to 32" • Manual clamping chuck with 6-jaw chuck • Automatic probing system for rim contour detection • Automatic spindle speed control: 50–2000 rpm • Uneven turning for matching and interpolation • 4-position manual tool holder (also available as automatic version) • Suitable for wet or dry machining Hfodpfx Ajxb Acbocuen • Capable of deep dish wheel machining • No manual pre-machining required Fully automatic tool holder - Automatic tool change head Minimum quantity lubrication system - Retrofit spray cooling - 3L reservoir - Adjustable air and lubricant ratio - Water separator and ball valve CNC cutting and coolant for wheels - Technically 100% residue-free evaporating lubricant for CNC diamond cutting of aluminium wheels. - This lubricant evaporates without leaving any residue. - Suitable for lubrication and cooling with minimum quantity lubrication, also known as minimal lubrication or spray cooling. CNC-L50 probe tip Probe tip (radius 1.5 mm / length 50 mm) for probe with M4 thread Turning insert for CNC diamond cutting machine - Length: 150 mm - Carbide grade: P25/30 - Cutting material: Polycrystalline diamond - Shank height: 25 mm - Shank design: square - Shank width: 25 mm - Cutting direction: right-hand 6-jaw chuck Purchased on 10.01.2025 Original gross price: 38,515.30 EUR The machine is located in 04328 Leipzig. More photos available upon request. You are welcome to send us a price proposal. Reasonable counter-offers will be considered. When making inquiries, please include your complete contact details! You are also welcome to inspect the machine on site. Please call us to arrange an appointment. The item is part of an insolvency proceeding and therefore shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Warranty is entirely excluded. No liability, reduction, or rescission accepted. Inspection prior to purchase is highly recommended – sold as viewed. All information provided without guarantee. Subject to errors and prior sale. The item is sold as inspected on site, in used condition, under retention of title and exclusion of all warranties for visible and hidden defects, in particular any technical, quality-related, or performance shortcoming or usability. For time reasons, we will answer only serious inquiries and price offers! This advert is for informational purposes only. Inspection of the item is by appointment only! Location: 04328 Leipzig Best regards

Sąlyga: geras (naudotas), Horizon PF P-330 lankstymo mašina su pagrindu Mašina yra labai geros būklės, 100% veikianti. Ši lankstymo mašina idealiai tinka skaitmeninei spaudai. Greitas ir paprastas nustatymas – automatinis kasetės reguliavimas ir popieriaus formato atpažinimas. Didelis privalumas – vakuuminis padavimas, komplekte yra kompresorius. Mašina puikiai susitvarko su visų rūšių popieriumi. Pagaminta Japonijoje. Techninės specifikacijos: Minimalus formatas: 125 x 130 mm Maksimalus formatas: 310 x 432 mm Hfsdpfoxk U Rvox Acuen Popieriaus svoris: 40–180 g/m² Paduodamo popieriaus krūvos aukštis: 50 mm Šeši lankstymo variantai: per pusę, per ketvirtį, Z-lankstymas, C-lankstymas, altorinis lankstymas ir kt. Lankstymo greitis: 200 lapų/min, 12 000 lapų/val. Išmatavimai: 1060 x 553 x 670 mm Svoris: 45 kg Maitinimas: 230 V Komplekte: išorinis kompresorius garso slopinimo korpuse, naudojimosi instrukcija ir didelio formato priedas.