Įrankių frezos

DECKEL FP2

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, A fully refurbished universal tool milling machine Deckel FP2 from 2019 is available. Travel paths X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Ksdpfx Afovf Iy De Ijwt

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes Kwsdpfx Afjr En Dyj Ist - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual Kwodevbifgepfx Af Ijt - Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Sąlyga: naudotas, bendras aukštis: 16 000 mm, bendras plotis: 1 100 mm, bendras ilgis: 1 500 mm, Unladen weight: 1,000 kg Milling machine, universal milling machine Model: Conventional Manufacturer: Deckel Type: FP2 Travel (X/Y/Z): 400 x 270 x 400 mm Spindle speed: 40–2,000 rpm Table size: 700 x 330 mm Spindle taper: ISO 40 Spindle motor power: 2.2 kW Overall dimensions: 1,500 x 1,100 x 1,600 mm Machine weight: 1,000 kg - Documentation available: No Kwsdex S Eayspfx Af Ijt - CE certificate available: No - Control type: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Transport dimensions: 1,500 mm x 1,100 mm x 1,600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport units: 1 Financial Information VAT: The listed price is exclusive of value-added tax VAT/Margin Scheme: VAT is deductible for business customers Delivery and trade-in possible at any time for all items from the industrial sector Lukas van Rossum

Sąlyga: geras (naudotas), Technical data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section/profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for tube and profile rolling The seller is not liable for typing or data transmission errors. The machine's condition (appearance, technology, and wear) is consistent with its age; used machines are sold without any warranty. Kwodswchn Uopfx Af Ist

Sąlyga: naudotas, x eiga: 400 mm y eiga: 200 mm z eiga: 400 mm Veleno sukimosi greičių skaičius: 18 Sukimosi greičiai: 40 - 2000 aps./min. Stalo tvirtinimo paviršius: 730 x 240 mm Tvirtinimas: SK 40 Įpjovų atstumas: 4 / 12 mm Padavimų skaičius: 18 Padavimų diapazonas: 8 - 400 mm/min Greitasis padavimas: 1200 mm/min Kjdpfx Aoxqrdtsf Ijwt Bendra galingumo poreikis: 2,2 kW Staklių svoris apie: 1400 kg Aukštis apie: 1700 x 1400 x 1700 mm - tvirta / didelio našumo universali frezavimo staklė - NEWALL skaitmeninis indikatorius - Aušinimo skysčio sistema

Sąlyga: naudotas, Gamybos metai: 1989, Technical details: X travel: 300 mm y travel: 300 mm z travel: 400 mm Control: Contour 3 path control Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° Quill stroke: 60 mm Speed range: 40 – 4000 / 21 steps rpm Feed rate: 2 – 3600 mm/min Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table (mm) Table load capacity: 0.45 t Total power requirement: 12.5 kVA Machine weight approx.: 1400 kg Machine dimensions approx. (LxWxH): 1.5 x 2.1 x 2.0 m Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Kwjdpfxju Nc Tws Af Ijt Features: - Operation via Grundig electronic control panel with extension arm - Coolant system with pump - Handheld control unit with handwheel - Machine lighting The machine can be demonstrated under power. i.D.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1975, O F F E R We are pleased to offer you, without obligation and subject to prior sale and errors, the following item ex-stock: DECKEL Universal Tool Milling Machine Model FP 2 Year of manufacture approx. 1975 ----- Table travels: longitudinal powered/manual 390 / 400 mm vertical powered/manual 390 / 400 mm Cross travel of milling slide powered/manual 190 / 200 mm Fixed angle table 250 x 700 mm Max. height under spindle 400 mm Overhang of the vertical spindle approx. 165-465 mm Spindle taper SK 40 18 spindle speeds 40-2,000 rpm Infinitely variable feed rate 5 – 400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total connected load 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted Kjdpfxexzk Irj Af Iowt • Original DECKEL universal dividing attachment with counter support and face plates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storage of the above-mentioned accessories and various arbors, approx. 30 assorted collets, various milling tools, various arbors, etc. as well as operation tools, separate control cabinet, coolant system Condition : Very good – ready for demonstration, ideal for training workshops / apprenticeships Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments kept in stock.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 3 150 aps./min, veleno greitis (min.): 31 aps./min, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 6 300 aps./min, sukimosi greitis (min.): 31 aps./min, garantijos trukmė: 3 mėnesiai, Įranga: dokumentacija / vadovas, Siūlome šią restauruotą DECKEL FP 2NC įrankių frezą su TNC 320 valdymu, pagamintą 1982 metais. Gamintojas: DECKEL Modelis: FP 2NC su TNC 320 Pagaminimo metai: 1982 Būklė: Pilnai restauruota Valdymas: TNC 320 Kwsdpfx Ajx Sv Rcsf Iot Mašinos tipas: Įrankinė freza Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę arba paskambinkite.

Sąlyga: geras (naudotas), Gamybos metai: 1966, Universal milling machine Deckel FP2 -WKG 512- Offered here is a universal milling machine from the manufacturer Deckel, model FP2. Technical Data Manufacturer: Deckel Kwsdpourk Exefx Af Iot Model: FP2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydraulic vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm – 17.5 mm

Sąlyga: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 6085074953, Offer 24169 Technical Specifications: - Max. working width: 4050 mm - Max. cutting capacity, St 40: 13 mm - Blade gap adjustment manual - Number of hydraulic hold-downs: 18 pcs - Backgauge positioning control (motorized): 20 – 1000 mm - Front squaring arm and support arms - Strokes per minute (depending on cutting angle/length): 7 – 15 per/min - Hydraulic drive: 400 V / 30 kW - Space requirement incl. backgauge, without front support arms: approx. L 5400 x H 2250 x W 2250 mm - Weight: approx. 16,000 kg - Included: Kjdpfx Astrw Hmof Iswt - Electric foot switch - Cutting line illumination - Cutting length preselection - Rear of the machine equipped with light curtain safety system

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1968, X ašies eiga: 800 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, šilko eigos atstumas: 80 mm, bendras ilgis: 1 000 mm, stalo plotis: 520 mm, stalo ilgis: 1 000 mm, stalo apkrova: 2 000 kg, bendras svoris: 2 500 kg, įėjimo įtampa: 400 V, ruošinio svoris (maks.): 2 000 kg, Siūlome šią atnaujintą DECKEL FP2LB frezavimo staklę, pagamintą 1968 metais. Ksdpfx Afex Sdxzo Iowt

Sąlyga: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electronic hand controller - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 - 3,150 rpm with 21 gear steps Feed rate: 4-2000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilting: 15°/45° - B-axis swiveling: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional features: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Kodpfxswid Spe Af Iewt Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space including auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and in operation by appointment.

Sąlyga: geras (naudotas), Techniniai duomenys: Darbinis ilgis: 2050 mm maks. lenkimo pajėgumas: 18,0 mm Galutinis lenkimas: 12,0 mm Viršutinio volo skersmuo: 280 mm Apatinio volo skersmuo: 280 mm Kūginio lenkimo įrenginys hidraulinis atlenkiamas guolis Variklio galia: 7,5 kW Matmenys (Ilgis x Plotis x Aukštis): apie 3650 x 1550 x 1650 mm Svoris: apie 7,5 tonos Kedpfoxruvzox Af Iswt Pardavėjas neatsako už rašymo ar duomenų perdavimo klaidas. Mašina, išvaizda, technika ir nusidėvėjimas atitinka amžių; naudotos mašinos parduodamos be jokios garantijos.

Sąlyga: naudotas, Gamybos metai: 1989, x eiga 300 mm y eiga 300 mm z eiga 400 mm Kjdpfex Ndbqjx Af Iswt CNC valdymas DIALOG 11 Veleno tvirtinimas ISO 40 Veleno apsisukimai 31 - 5 000 aps./min Stalo dydis 620 x 390 mm Stalo apkrova 250 kg Variklio galia 5,5 kW Tiekiamas greitis be žingsnių 2 - 6 000 mm/min Veržlės eiga 80 mm Darbinė įtampa 380 V Bendra galingumo paklausa 11,0 kVA Staklių svoris apie 1,65 t Reikalinga vieta apie 1,85 x 1,90 x 1,80 m Elektra spinta 1,35 x 0,70 x 1,70 m - Gamyklos nr.: 2836-0283 - Valdymas: DIALOG 11 - Elektrinis rankinis ratukas - Horizontalus frezavimo velenas - Aušinimo įranga