Universalus frezavimo ir gręžimo įrenginys

DECKEL FP 2

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, A fully refurbished universal tool milling machine Deckel FP2 from 2019 is available. Travel paths X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Ncjdpsvf Iy Djfx Af Iol

Sąlyga: naujas, KNUTH hidraulinis vamzdžių lankstymo įrenginys 1/2 (1/2"–2") iš vamzdžių lankstymo mašinų kategorijos – tai galingas ir kompaktiškas sprendimas vamzdžių ir profilių apdirbimui. Ši mobilioji vamzdžių lankstymo mašina aprūpinta rankine hidrauline pompa ir puikiai tinka didesnio skersmens plieninių vamzdžių lankstymui. Su 10 t slėgio jėga galima vamzdžius lankstyti iki 90° naudojant matricas, kurios padengia populiariausias vamzdžių dimensijas. Pridedamas trikojo stovas užtikrina stabilumą ir patogumą lankstymo metu. Kompaktiška konstrukcija leidžia įrenginį lengvai naudoti skirtingose vietose. Galite būti tikri, kad šis tvirtas vamzdžių lankstymo įrenginys atitiks jūsų poreikius. Norėdami gauti daugiau informacijos arba užsisakyti, nedvejodami pateikite užklausą internetu. Atraskite vamzdžių lankstymo įrenginių privalumus ir pasirūpinkite šiuo efektyviu KNUTH įrenginiu jau dabar. Ncsdpfx Afouzlh Io Iel

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout Ncsdpfx Afovbifgj Isl - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual - Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Sąlyga: naudotas, bendras aukštis: 16 000 mm, bendras plotis: 1 100 mm, bendras ilgis: 1 500 mm, Unladen weight: 1,000 kg Milling machine, Milling machine, Milling bench Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400 x 270 x 400 mm Speed: 40-2000 rpm Table: 700 x 330 mm Spindle taper: ISO40 Spindle motor power: 2.2 kW Overall dimensions: 1500 x 1100 x 1600 mm Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Deals (actions): current deal - Transport dimensions: 1500 mm x 1100 mm x 1600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Transport packages [pcs.]: 1 Financial Information VAT: The price stated is exclusive of VAT VAT/Differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Lukas van Rossum Ncodpfx Aox S Eayof Iel

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Nedjr En Dyopfx Af Iecl Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Sąlyga: naudotas, x eiga: 400 mm Ncodpfx Ajxqrdtsf Ijl y eiga: 200 mm z eiga: 400 mm Veleno sukimosi greičių skaičius: 18 Sukimosi greičiai: 40 - 2000 aps./min. Stalo tvirtinimo paviršius: 730 x 240 mm Tvirtinimas: SK 40 Įpjovų atstumas: 4 / 12 mm Padavimų skaičius: 18 Padavimų diapazonas: 8 - 400 mm/min Greitasis padavimas: 1200 mm/min Bendra galingumo poreikis: 2,2 kW Staklių svoris apie: 1400 kg Aukštis apie: 1700 x 1400 x 1700 mm - tvirta / didelio našumo universali frezavimo staklė - NEWALL skaitmeninis indikatorius - Aušinimo skysčio sistema

Sąlyga: naudotas, Gamybos metai: 1989, Technical details: X travel: 300 mm y travel: 300 mm z travel: 400 mm Control: Contour 3 path control Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° Quill stroke: 60 mm Speed range: 40 – 4000 / 21 steps rpm Feed rate: 2 – 3600 mm/min Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table (mm) Table load capacity: 0.45 t Total power requirement: 12.5 kVA Machine weight approx.: 1400 kg Machine dimensions approx. (LxWxH): 1.5 x 2.1 x 2.0 m Nsdju Nc Twspfx Af Iocl Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Features: - Operation via Grundig electronic control panel with extension arm - Coolant system with pump - Handheld control unit with handwheel - Machine lighting The machine can be demonstrated under power. i.D.

Gamybos metai: 1983, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Ncjdpfx Afsd Nb A Ns Iol Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 3 150 aps./min, veleno greitis (min.): 31 aps./min, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 6 300 aps./min, sukimosi greitis (min.): 31 aps./min, garantijos trukmė: 3 mėnesiai, Įranga: dokumentacija / vadovas, Siūlome šią restauruotą DECKEL FP 2NC įrankių frezą su TNC 320 valdymu, pagamintą 1982 metais. Gamintojas: DECKEL Modelis: FP 2NC su TNC 320 Pagaminimo metai: 1982 Būklė: Pilnai restauruota Valdymas: TNC 320 Mašinos tipas: Įrankinė freza Nsdpfxsx Sv Rcj Af Ijcl Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę arba paskambinkite.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1968, X ašies eiga: 800 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, šilko eigos atstumas: 80 mm, bendras ilgis: 1 000 mm, stalo plotis: 520 mm, stalo ilgis: 1 000 mm, stalo apkrova: 2 000 kg, bendras svoris: 2 500 kg, įėjimo įtampa: 400 V, ruošinio svoris (maks.): 2 000 kg, Siūlome šią atnaujintą DECKEL FP2LB frezavimo staklę, pagamintą 1968 metais. Ncjdpfxox Sdxzj Af Isl

Sąlyga: naudotas, Ratų skersmuo: 500 mm Nsdpfx Afewl D S Uo Ijcl Sandėlio vieta: Nattheim

Sąlyga: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electronic hand controller - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 - 3,150 rpm with 21 gear steps Feed rate: 4-2000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilting: 15°/45° - B-axis swiveling: +/- 45° Vertical milling head: Nedpowid Spjfx Af Iocl - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional features: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space including auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and in operation by appointment.

Sąlyga: geras (naudotas), Gamybos metai: 1976, Deckel FP3 įrankinė frezavimo staklė su 3 ašių Heidenhain skaitmenine indikacija, staklės geros būklės. Standus stalas, SK 40 veleno kūgis, priedai: įvairūs įvorės ir frezavimo velenai, atrama. Gera darbinė būklė. Galima parodyti įjungtas pagal susitarimą. Nodpfx Afsxbx R Us Iecl

Sąlyga: naujas, Gamybos metai: 2025, Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 500M is a conventional milling machine, ideal for training and production purposes. The Heidenhain Positip 8016 Active digital display allows for precise positioning, as well as operations such as creating and referencing a bolt hole circle. Control System: Heidenhain Positip 8016 Active digital display Spindle Speed: 0 - 3000 rpm, geometrically tiered direct-drive gearbox with 16 speed steps for maximum torque and milling performance Feed Rate: 0 to 500 mm/min, steplessly adjustable Ncsdpfxoh Su Ips Af Ijl Rapid Traverse: 1.5 m/min Quill: Extendable quill, vertical 80 mm, SK40, optional: horizontal working spindle or horizontal quill (extendable approx. 100 mm) Drawbar System: hydraulic drawbar system – DIN 69872 optional: DIN 2080 Axes Travel: X/Y/Z 500/400/400 mm Table: Fixed angle table, 800x480 mm Equipment: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Movable chip tray • Machine lamp • Centralized lubrication • Z-axis bellows Options: • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc. Further technical data can be found in the attached data sheet.

Sąlyga: naudotas, Gamybos metai: 1989, x eiga 300 mm y eiga 300 mm Ncedpfxsx Ndbqo Af Isl z eiga 400 mm CNC valdymas DIALOG 11 Veleno tvirtinimas ISO 40 Veleno apsisukimai 31 - 5 000 aps./min Stalo dydis 620 x 390 mm Stalo apkrova 250 kg Variklio galia 5,5 kW Tiekiamas greitis be žingsnių 2 - 6 000 mm/min Veržlės eiga 80 mm Darbinė įtampa 380 V Bendra galingumo paklausa 11,0 kVA Staklių svoris apie 1,65 t Reikalinga vieta apie 1,85 x 1,90 x 1,80 m Elektra spinta 1,35 x 0,70 x 1,70 m - Gamyklos nr.: 2836-0283 - Valdymas: DIALOG 11 - Elektrinis rankinis ratukas - Horizontalus frezavimo velenas - Aušinimo įranga