Gręžimo staklės

Deckel FP4M CE Konform

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Hedpfx Absu Tuk Hjvsnl Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 450 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 350 mm, 3 ašių skaitmeninis indikatorius Horizontali ir vertikali frezavimo galvutė Ištraukiamas pinolas Techniniai duomenys: Išilginis eigos kelias X – 450 mm Skersinis eigos kelias Y – 300 mm Vertikalus eigos kelias Z – 350 mm Hnodpfx Aowyit Hebvjl Stalo matmenys – 800 x 400 mm Veleno kūgis – SK40 Veleno apsukų diapazonas – 50–2500 aps./min Paduoda – 8–400 mm/min Variklio galia – 3,2 kW Mašinos svoris – 1500 kg Techniniai duomenys, priedai ir aprašymas nėra įpareigojantys.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Finish, CE Compliant! Technical Data: - Year of manufacture: 1984 | Machine No.: 2203-1429 - Fixed angle table (newly planed) - Spindle speed: 50 – 2,500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1,300 mm/min - Travel (X/Y/Z): 500 / 400 / 400 mm - Vertical milling head on spindle support, adjustable by 150 mm Hodpfx Ajw N Sfvjbvonl - Vertical and horizontal quill – SK40 taper - Vertical quill extendable by 90 mm - Drawbar system: M16 - Weight: approx. 1,500 kg Accessories & Equipment: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication About the Machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine operates quietly. Rapid traverse is available in all axes, and all bellows are as new. The fixed angle table has been newly planed. This is a reliable and user-friendly machine. The oil has been changed and both mechanical and electrical systems have been checked. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power on site.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Universalus įrankių frezavimo staklės DECKEL FP 3 Hnjdpfxoxuh Rdo Abvol Su 3 ašių aktyviu skaitmeniniu indikatoriumi Heidenhain TNC 11 Pagaminimo metai: 1984 Važiavimo eiga: X 500, Y 300, Z 400 mm Apsisukimų intervalas: 25 – 2500 aps./min Su šia papildoma įranga: Standus kampinis stalas 850 mm x 400 mm tvirtinimo paviršius Pasukamas apvalus stalas Ø 450 mm su padalijimo diskais Pjovimo galva Stumdomas vertikalus frezavimo galvutė Ištraukiama gręžimo pinolė Besižingsnis padavimas per potenciometrą Įvairūs frezavimo dirželiai SK 40 / S22 x 2 Drožlių talpa Automatinis centrinis tepimo siurblys X, Y, Z ašims Staklių apšvietimas Aušinimo įrenginys 4 vnt. staklių kojelės Eksploatacijos instrukcija

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 600 mm, šlifavimo plotis: 400 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 300 mm, stalo apkrova: 400 kg, šlifavimo ratuko plotis: 50 mm, bendras svoris: 3 600 kg, ELB Perfekt 6, pagaminta 2002 m., šlifavimo sritis 600 x 400 mm, šlifavimo diskas 300 x 50 mm, 4 kW špindelio galia, automatinis šlifavimo ciklas: sugrubimas, apdailinis šlifavimas, deginimas, pakėlimas. Išlyginimo įtaisas sumontuotas ant špindelio galvutės su kompensacija. Mašina profesionaliai atnaujinta mūsų įmonėje ir dabar atitinka naujos mašinos geometriją. Šlifavimo špindelis pakeistas nauju guoliu. Komplektacija: elektro-permanentinė magnetinė tvirtinimo plokštė 600 x 400 mm, vandens rezervuaras su automatinio popieriaus filtro įrenginiu. Visos funkcijos išbandytos, mašiną galima apžiūrėti veikiančią pas mus. Taip pat galime pasirūpinti įrengimu ir darbuotojų apmokymu vietoje bei būsima technine priežiūra. Finansavimas / lizingas galimas – mielai pateiksime pasiūlymą! Hnedpfexdalfsx Abvel

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Sukimosi skersmuo virš lovos: 600 mm Sukimosi skersmuo virš atramos: 400 mm Sukimosi ilgis: 2000 mm Centro aukštis virš atramos: 300 mm Centro atstumas: 1600 mm Sukimosi greičiai: 3 - 2.500 aps./min Grąžto laikiklio kūgis: MK 5 Pagrindinio veleno anga: 62 mm Hodpfx Abew Rkt Iovenl Pinolio eiga: 190 mm Išilginiai padavimai: apie 0,001–10 reguliuojamas mm/aps. Skersiniai padavimai: apie 0,001–5 reguliuojamas mm/aps. Greitasis padavimas X ašyje: iki 5000 m/min. Bendras galios poreikis: 40 KVA Mašinos svoris apie: 5,6 t Mašinos matmenys (IxPxA): apie 4,0 x 2,0 x 1,9 m Įskaitant priedus, žr. nuotrauką *

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Hnedpfx Abjwkrp Eevol Working area: Quill travel Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0 – 527 mm Quick-change system SF 32 Work spindle: 2.9 kW Continuously variable speed range: 50 - 6300 rpm Clamping surface: 320 x 670 mm Dimensions and Weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Būklė: naujas, Gamybos metai: 2026, Machine Characteristics Heavy, Stable Cast Iron Frame: The robust structure based on a heavy cast iron frame ensures stability and durability even under intensive use. Milling Head Height Adjustment on the Support: Unique height adjustment on the support, not the column, allows the machine to be adapted for a wide range of applications. Heavy-Duty Cross Table for Mill/Drill: The table features impressive dimensions with a precisely ground surface, providing a solid foundation for a variety of projects. Dovetail Guides: Innovative dovetail-shaped guides guarantee smooth movement on all three axes, resulting in excellent machining accuracy. Quiet Operation Thanks to Ground Gears: Precisely ground gears ensure quiet operation, enhancing comfort in the workshop environment. Left and Right Spindle Rotation: Operate the tool in both directions to accommodate diverse tasks. +/- 90 Degree Swiveling and Height-Adjustable Head: Flexible angle and height adjustment provide maximum control over material processing. Digital Longitudinal and Cross Readouts Additional Options and Benefits: The ZX 7045E DRO model is available from stock and comes with a free accessory kit: Drill Chuck MT4/MT3 Reducing Sleeve MT3/MT2 Reducing Sleeve The ZX 7045E DRO mill-drill machine is a high-precision, advanced tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and sturdy construction, it allows for precise milling and drilling on a wide range of materials. Its versatility and dependability make the ZX 7045E DRO the ideal equipment for professional workshops, meeting the demands of even the most complex applications. (Base available as an option) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Quill travel: 100 mm Spindle taper: MT4 Spindle speed (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Max. distance from spindle end to table: 460 mm Travel on X/Y/Z axis: 500 / 210 / 425 mm Distance spindle to column surface: 245 mm Worktable dimensions: 730x210 mm Base dimensions: 400x600 mm Motor power S1/S6: 1500W/2100W 400V Machine dimensions (height with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment 2-axis digital readout MT3/B18 drill chuck arbor Service tools Keyless drill chuck 3–16 mm/B18 MT4/MT3 reducing sleeve MT3/MT2 reducing sleeve Hjdpfx Asx Dkr Njbvenl Operator’s manual

Būklė: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 2 500 aps./min, stalo ilgis: 790 mm, stalo plotis: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Hnodpswffymjfx Abvsl Cross travel 400 mm Vertical travel 400 mm Spindle stroke 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Būklė: labai geros būklės (naudotas), - Heidenhain digital display. - Accessories available. Travel distances: X-axis travel: 280 mm Hnjdpfx Abow Hqf Rovel Y-axis travel: 210 mm Cross table: KS 255 D Spindle speeds: 135 – 4,500 rpm