Presona Ab Lp 85 Vh1 pirkti naudotą (17 114)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Hsdpsv T I Evofx Admonk Your Mertens & Frowein GmbH Service Team

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 28 748 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, galia: 37 kW (50,31 AG), tūrio srautas: 350 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted Hnedpovn Tg Iofx Admok - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. Hnodpfsvgrh Uox Admjk The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Būklė: geras (naudotas), Gamybos metai: 2008, veikimo valandos: 24 629 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 650 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 24 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 1 350 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 10 000 mm, Good day, We hereby offer you, without obligation, a used baling press manufactured by Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s manual and brochures, for which we cannot guarantee accuracy or completeness. Hnodpfjymmmpjx Admsk Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific press force: 81 N/cm² Pre-press flap force: 50 t Charge box dimensions: 1,650 x 1,100 mm Filling volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only, after disassembly): approx. 25 t Note: The machine has been used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced in July 2026 with a new, larger press. Until then, the machine can be inspected in operation with material input. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. Hedpfevwlqqjx Admjnk The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour Hjdpsu Thhrefx Admsnk - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Baler Presona LP 85 VH2 with cross-tie, year of manufacture 2018 Technical Data: Hnedpjyz Snpsfx Admok Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput volume: 1200 m³/h Throughput rate at 30-100 kg/m³: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions (press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight approx. 27,000 kg The press was dismantled from ongoing operation. Technical documentation is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the accuracy of the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is made on advance payment ex works, without warranty or guarantee.

Būklė: geras (naudotas), We are offering a used shelf connector from the manufacturer Jung Heinrich for sale. Technical data for the shelf connector: Manufacturer: Jung Heinrich Type: Esmena Scope of delivery includes: 01x Shelf connector, used Material finish: Sendzimir galvanized Rack spacing: approx. 200 mm L-profile: approx. 85 x 40 mm Weight per piece: approx. 0.519 kg/piece 04x Hexagon bolts, M8 x 20 8.8 04x Hexagon nuts, M8 Hsdped Tt Afofx Admsnk 04x Washers, M8

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 8 900 h, mašinos/transporto priemonės numeris: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum volume output under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7-9 t/h - 50 kg/m³ = 8-9 t/h - 100 kg/m³ = 11-14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Charging chamber volume: 2.7 m³ Hsdpfx Aeyrhi Nedmjnk - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs. - Pressing force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank capacity: 600 l - Electric motor power 400 V, 50 Hz: 1 × 45 kW - Oil cooler: 1 × 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Press, control cabinet, operator panel, conveyor belt for sale. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We do not accept any liability for technical information or possible errors. Video material can be provided upon request.

Būklė: naudotas, galia: 375 kW (509,86 AG), kuro tipas: dyzelinas, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2026,

Būklė: naudotas, galia: 375 kW (509,86 AG), kuro tipas: dyzelinas, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2026,

Būklė: naudotas, galia: 375 kW (509,86 AG), kuro tipas: dyzelinas, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2026,

Būklė: naudotas, galia: 375 kW (509,86 AG), kuro tipas: dyzelinas, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2026,

Būklė: naudotas, galia: 375 kW (509,86 AG), kuro tipas: dyzelinas, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2026,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 15 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: LP80VHK1, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 2 500 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), Įranga: dokumentacija / vadovas, Technical Data – Baler: Manufacturer: Presona AB Model: LP80VHK1 Year of manufacture: 2007 Main press force: 78.5 t Specific press force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput capacity: 930 m³/hour Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, fully automatic Throughput at bulk density of: – 30 kg/m³: approx. 9 to 12 t/hour Hnodpfxoxw H Iyj Admjk – 50 kg/m³: approx. 14 to 17 t/hour – 100 kg/m³: approx. 16 to 25 t/hour Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler): 10,985 x 2,300 x 2,900 mm Baler weight (approx.): 24 t Loading device Bale guiding system from chute to floor Hydraulic system with cartridge mounting Control system for 2 conveyor belts Baler control system with PLC control Photoelectric sensors for two-stage filling of the press chamber Hour counter Bale counter Bale length measurement counter Technical documentation

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, pirmoji registracija: 12/2014, kuro tipas: dyzelinas, emisijos klasė: Euro 6, Gamybos metai: 2014, galia: 340 kW (462,27 AG), Įranga: ABS, oro kondicionavimas, oro pagalvė, retarderis, spoileris,

Būklė: naudotas, rida: 801 000 km, galia: 340 kW (462,27 AG), pirmoji registracija: 05/2009, kuro tipas: dyzelinas, tuščias svoris: 11 575 kg, didžiausias leistinas svoris: 14 350 kg, bendras svoris: 26 000 kg, ašių konfigūracija: 6x2, ratų bazė: 4 800 mm, kuras: dyzelinas, stabdžiai: intarder, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas-oras, Gamybos metai: 2009, Įranga: hidraulika, retarderis,

Būklė: labai geros būklės (naudotas), rida: 628 061 km, galia: 300 kW (407,89 AG), pirmoji registracija: 08/2012, kuro tipas: dyzelinas, padangos dydis: 385/65/22.5, ašių konfigūracija: 6x2, kuras: dyzelinas, stabdžiai: intarder, spalva: balta, pavaros tipas: automatinis, pavarų skaičius: 12, emisijos klasė: Euro 5, pakaba: plienas-oras, Gamybos metai: 2012, Įranga: ABS, AdBlue, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, suodžių filtras,

Būklė: labai geros būklės (naudotas), rida: 631 097 km, galia: 300 kW (407,89 AG), pirmoji registracija: 08/2012, kuro tipas: dyzelinas, padangos dydis: 385/65/22.5, ašių konfigūracija: 6x2, kuras: dyzelinas, stabdžiai: intarder, spalva: balta, pavaros tipas: automatinis, pavarų skaičius: 12, emisijos klasė: Euro 5, pakaba: plienas-oras, Gamybos metai: 2012, Įranga: ABS, AdBlue, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, suodžių filtras,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, eigos ilgis: 215 mm, gerklės gylis: 410 mm, lenkimo jėga (didž.): 85 t, atstumas tarp stulpų: 1 750 mm, darbinis ilgis: 2 050 mm, TECHNINĖ INFORMACIJA Spaudimas: 85 t Lenkimo ilgis: 2.050 mm Stovų atstumas: 1.750 mm Eiga: 215 mm Įgilinimas: 410 mm ĮRENGINIO DUOMENYS Valdymas: DELEM Matmenys ir svoris Įrenginio matmenys: 2.700x2.100x2.400 mm Svoris: 7.900 kg ĮRANGA Valdymas dviem rankomis 2 vnt. atraminės rankos Šoninės apsauginės durys Lasersafe Fissler Wila įrankių laikiklis Hjdpfxeyhmdqj Admjnk Matrico perkėlimas Bombiravimas Įrankių spinta

Būklė: geras (naudotas), Included in the scope of delivery: Hsdpfei Enx Tsx Admjnk 01x Racking connector, used ( for lateral attachment to the racking upright ) Manufacturer: Jung Heinrich Type: Esmena Material finish: galvanized (Sendzimir) For racking distance: approx. 250 mm L-profile: 85 x 40 mm Weight: 0.68 kg | each

Būklė: naujas, Crosscut and Mitre Circular Saw GRAULE ZS 85 N - Tiltable - Includes: - Crosscut and Mitre Circular Saw GRAULE ZS 85 N - tiltable - Material support shoulder made from laminated wood - without machine stand and saw blade - Includes: - GRAULE Machine Stand for models ZS 85 N to ZS 170 Includes: - GRAULE Infeed Roller Conveyor Type RO Complete with support legs and connection brackets Ball-bearing mounted plastic rollers, diameter 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm Includes: - Roller Conveyor/Length Stop GRAULE Type RLK with scale and fold-away material stop (to the rear). Ball-bearing mounted plastic rollers, diameter 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Hnsdju R Sycjpfx Admsk Support legs for conveyor height 885 +/- 10 mm - New showroom machine -

Būklė: geras (naudotas), rida: 968 789 km, galia: 300 kW (407,89 AG), pirmoji registracija: 07/2008, kuro tipas: dyzelinas, ašių konfigūracija: 8x2, kuras: dyzelinas, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, Gamybos metai: 2008, Įranga: ABS, autonominis šildytuvas, elektrinis langų reguliavimas, kranas, oro kondicionavimas, priekabos jungtis,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, eigos ilgis: 215 mm, gerklės gylis: 410 mm, lenkimo jėga (didž.): 85 t, atstumas tarp stulpų: 1 750 mm, darbinis ilgis: 2 050 mm, TECHNINĖS SPECIFIKACIJOS Spaudimas: 85 t Lankstymo ilgis: 2.050 mm Hnedpjxxq T Njfx Admok Stulpų tarpas: 1.750 mm Eigos ilgis: 215 mm Iškyša: 410 mm ĮRANGOS DETALĖS Valdymas: DELEM Matmenys ir svoris Įrenginio matmenys (I x P x A): 2.700 x 2.100 x 2.400 mm Svoris: 7.900 kg APRAŠYMAS Valdymas dviem rankomis 2 vnt. atraminės rankos Šoniniai apsauginiai vartai Lasersafe Fissler Wila įrankių laikiklis Matricos poslinkis Išlinkio kompensacija Įrankių spinta

Būklė: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Spaudimas 85 t, Lankstymo ilgis 2050 mm, Stovų atstumas 1750 mm, Valdymas DELEM, Eiga 215 mm, Gerklės gylis 410 mm, Bendra galia 13 kW, Svoris 8 750 kg, Staklių matmenys 3190 x 2100 x 2375 mm Hnsdpfxsw Imq Re Admjk