Balenų presas Presona LP80VHK1

Presona LP80VHK1

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Djdpfx Adovwlqqjmecr Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Gamybos metai: 2008, veikimo valandos: 40 000 h, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2008 (00191), Verkauft durch Bollegraaf Recycling Solutions, dem Originalhersteller dieser Bollegraaf Ballenpresse und Förderband: Bollegraaf HBC140s Ballenpresse (2x75kW). Ballenpresse: Gewicht: 47.100 kg Baujahr: 2008 Nur mit Hardox-Bodenblech ausgestattet Variable Kanal-Druckregelung Kunststoffventil Hydraulikpumpe über Frequenzumrichter angetrieben Nagetiere-abweisende Verkabelung Tiefenfiltration des Hydrauliköls Modem Betriebsstunden: 40.000 Diese Ballenpresse kann auch vollständig nach den 'Bollegraaf OEM Certified Refurbishment Standards' generalüberholt verkauft werden. Dies beinhaltet 2 Jahre Garantie. Kontaktieren Sie uns für weitere Informationen oder ein Angebot. Allgemeine Prinzipien der Generalüberholung: Reinigung & Demontage Vor Beginn der Überholung wird die Ballenpresse in unserer Werkstatt vollständig gereinigt und zerlegt. Toleranzen Nach der Demontage werden die Toleranzen aller Stahlkomponenten gemessen und wo nötig nachgeschweißt. Dies gilt mindestens für folgende Komponenten: • Pressstempel (Ram) • Rahmen • Kanal • Vorpressklappe Nach Demontage und Inspektion wird der Pressstempel nachgeschweißt und mit neuen Stempelrädern ausgestattet. Die Schutzgitter und die Vorpressklappe werden ausgedellt und falls erforderlich instandgesetzt. Neulackierung Nach der Toleranzmessung und eventuellen Reparatur- und Schweißarbeiten werden alle Komponenten gestrahlt und neu beschichtet. Hydraulik: Der Hydrauliktank wird gereinigt. Dcjdpfx Aekcgf Hodmor Alle Hydraulikleitungen und -schläuche werden ersetzt. Die hydraulischen Komponenten werden neu abgedichtet. Das Hydrauliköl wird ersetzt. Verkabelung: Alle Kabel werden überprüft und ggf. ersetzt. Alle Verteilerdosen werden erneuert und an gut zugänglichen Stellen montiert. Verschleißteile: Alle Verschleißteile werden ersetzt. Die Bolzen und Wellen der Zylinder sowie des Kanals werden erneuert. Alle Verschleißteile der Nadelinstallationen und Knoter werden ersetzt. Zylinder: Die Zylinder werden neu abgedichtet und – falls notwendig – mit einer neuen Chromschicht oder Kolbenstange versehen. MCC-Schaltschrank: Der Schaltschrank wird überprüft und gereinigt. Elektronische Bauteile werden falls erforderlich erneuert. Die SPS und das HMI (Bedienpanel) werden durch die neueste Schneider M340 Version inkl. neuester Software ersetzt.

Sąlyga: paruoštas naudoti (naudotas), Presavimoji Hsm HL 4809 LI - Didelė užpildymo anga, idealiai tinka didelėms dėžėms - Konteinerio vartymo įtaisas patogiam užpildymui Jėga kN: 480 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Balo svoris kg (priklausomai nuo medžiagos): iki 400 kg - Balo matmenys ilgis x plotis x aukštis mm: 1200 x 1100 x 750 - Įrenginio matmenys ilgis x plotis x aukštis mm: 5648 x 1849 x 2515 Tuščios eigos ciklo laikas sekundėmis: 53 - Rankinis surišimas: 4 kartus viela Dedera Dddspfx Admjcr

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), Connected load: 15.5 kW, weight: 6.8 t. Dsdpfxeip D Rzo Admecr

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HBC 140 2x75kW 2001 (210-008-01), spaudimo jėga: 155 t, balo svoris: 1 500 kg, slėgis: 250 juosta, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Pers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststofklep Anti-ratten bekabeling Urenstand 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de ‘Bollegraaf OEM Certified Refurbishment Standards’. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van de revisie Reiniging & demontage Voorafgaand aan de daadwerkelijke revisie wordt de pers volledig gereinigd en in onze revisiewerkplaats gedemonteerd. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Presschuif, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de presschuif opnieuw opgelast en voorzien van nieuwe schuifwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele reparatie- en laswerkzaamheden, worden alle componenten gestraald en opnieuw gecoat. Hydrauliek: Dsdpfx Astvau Aodmecr De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. De hydraulische componenten worden opnieuw voorzien van pakkingen. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en opnieuw op goed toegankelijke posities geplaatst. Slijtagedelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden opnieuw voorzien van pakkingen en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de meest recente software.

Sąlyga: naujas, SLR 50 TN – For detailed information, please contact us. Dedpfx Adevfp Ngsmscr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 25 t, pildymo angos plotis: 800 mm, pildymo angos ilgis: 1 050 mm, ryšulio plotis: 900 mm, ryšulio aukštis: 800 mm, įėjimo įtampa: 400 V, triukšmo lygis: 85 dB, galia: 18,5 kW (25,15 AG), tūrio srautas: 160 m³/val, Bollegraaf HBK25 siūloma Kipre. Įrenginys geros būklės, su grindiniu transportavimo konvejeriu. Galima iš karto naudotis. Techniniai presavimo įrenginio duomenys: Pavaros galia: 18,5 kW Balių matmenys: 800 x 900 x reguliuojama Pakrovimo bunkerio išmatavimai: 1.050 x 800 mm Presavimo jėga: 25 t Dodpfx Adoxbdgujmecr Našumas: 160 m3/val. (priklausomai nuo medžiagos) Transporterinės juostos techniniai duomenys (apytiksliai): Ilgis ant grindų: 3.000 mm Įstrižainės ilgis: 5.000 mm

Gamybos metai: 2020, Sąlyga: naujas, mašinos/transporto priemonės numeris: DF0240 - Rev.00, Pressure: 300 t Clear width: 600 mm Stroke: 500 mm Approx. machine weight (without operating fluids): 8.5 t Dimensions L x W x H: approx. 2275 x 1650 x 4050 mm Return force: 30 t Dcodpodxvfkofx Admer Motor power: 30 kW Max. working height: 800 mm Max. advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 500 mm Ram plate: 600 x 600 mm Table plate: 600 x 600 mm Table height above floor: 850 mm Oil tank: 350 l Oil cooling (electric): 1.5 kW (max) Ejector stroke: 250 mm Ejector force: 50 t Continuous maintenance balcony: 2,800 ? Oil drip tray: 2,800 ? Upper and lower tooling (for 8kg salt block): 11,000 ? Automatic filling with 500 kg reservoir: 58,000 ? Speed increase to 80 mm/sec: 19,000 ? Each additional meter of conveyor belt: 850 ? Light barriers front and rear: 6,800 ? Side paneling: 4,200 ? 7m roller conveyor – for salt block transport and interim storage: 12,900 ?

Sąlyga: naudotas, Gamybos metai: 2000, veikimo valandos: 28 155 h, Baler Paal Konti 200 D, year of manufacture 2000, optionally available with matching conveyor belt Paal KEM-1400 Technical specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale size: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput for 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The baler was dismantled from active operation. Dodpoxgp Ibjfx Admjcr Complete documentation available. Please note: All technical data is based on the manufacturer’s information. We do not assume liability for the listed specifications or possible errors. This offer is non-binding, subject to prior sale and can be withdrawn at any time. Viewings are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 13 284 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 140 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 500 kg, alyvos bako talpa: 2 600 l, Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 140 Year of Manufacture: 2017 Operating Hours: 13,284 hours (as of October 2025) Main Press Force: 140 t (max. 153.5 t) Pre-Press Force: 70 t Feed Hopper Dimensions: 1,600 x 1,100 mm (L x W) Filling Volume / Press Cycle: 4.34 m³ Theoretical Cycle Time: 16 seconds Bale Dimensions: 1,100 x 1,100 mm (W x H), length variable Drive Power: 2 x 75 kW Total Connected Load: 209 kW Tying: 5-fold vertical, fully automatic Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 30 t/h - 50 kg/m³: approx. 46 t/h - 100 kg/m³: approx. 82 t/h Bale Weights: 850 to 1,500 kg Hydraulic Oil: 2,600 l Univis N46 Installed Press Dimensions (with hopper and conveyor): 13,200 x 24,200 x 7,333 mm (L x W x H) Transport Dimensions (press only): 13,302 x 2,884 x 3,539 mm (L x W x H) Machine Weight (press): approx. 51.81 t Technical Data – Feed and Incline Conveyor with Swan Neck: Manufacturer: Bollegraaf Model: HBT 1216/1800 * 23,300 30°/15° Year of Manufacture: 2017 Drive Power: 7.5 kW Feed Conveyor Length: 6,750 mm Incline Conveyor Length: 14,400 mm Swan Neck Length: 2,150 mm Incline: 30° Usable Width: 1,754 mm Feed Conveyor Sidewall Height: 500 mm Incline Conveyor Sidewall Height: 800 mm Transport Dimensions Feed Conveyor (with one incline segment): 9,816 x 2,500 x 2,242 mm (L x W x H) Transport Dimensions Incline Conveyor with Swan Neck: 13,472 x 2,800 x 2,729 mm (L x W x H) Djdpfx Adoxpxhvjmocr Pit Dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Condition: The baler is in a very good, immediately operational condition. The conveyor belt chain should be replaced soon. The plant will remain in operation until December 2025. Scope of Delivery: Baler with conveyor, maintenance platform, access ladder, two wire feed stations for five wire coils each (without wire), and bale chute. Notes: The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection by appointment is possible. We accept no liability for technical data or potential errors.