Ryšulių presas

COMDEC - PAAL LV2020PFT

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 500 h, Funkcionalumas: visiškai funkcionalus, pjovimo jėga: 630 t, galia: 90 kW (122,37 AG), tuščias svoris: 36 500 kg, bendras plotis: 2 400 mm, bendras ilgis: 9 500 mm, bendras svoris: 40 000 kg, pjovimo ilgis (maks.): 1 600 mm, paskutinio kapitalinio remonto metai: 2024, įvesties srovės tipas: trifazis, darbinis slėgis: 220 juosta, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. A 250kW diesel generator can be offered separately. Model: MS-6300e Shearing force: 630 t Cutting length: 1,600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3,850 mm x 2,600 mm x 1,500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is loaded into the feed area with the help of an excavator. Due to the horizontal feed section and the weight of the scrap, it falls down into the loading chamber and into the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool carrier through the blades on the end wall. As the tool carriage moves horizontally, the processed material is pushed out through the blades at the front of the chamber. When returning to the rear position, the loaded scrap shifts by its own weight into the interior of the shear. Ppedpfx Afeuu Upgj Ujr Scrap shears are available in various configurations to suit customer requirements, and the output size can be selected (for new orders). Inspection and test operation are possible.

Būklė: paruoštas naudoti (naudotas), Gniuždymo jėga: apie 700 kN (apie 70 t) Variklio galia: apie 11 kW Maitinimas: 3 × 400 V / 50 Hz Viena ryšulio svoris: iki maždaug 600 kg Ryšulio matmenys: apie 1100 × 1100 × 1200 mm Mašinos matmenys: apie 5,9 m ilgio, 2,5 m pločio, apie 2,6 m aukščio Mašinos svoris: apie 7 t Ciklo laikas: apie 45–47 s Konstrukcinės ypatybės • didelė įkrovimo anga kartonui • galimybė automatiniam užpildymui (pvz., transporterių) • rankinis vielos surišimas (4 vielos) • padėklo fiksacija ir hidraulinės durys ryšulio paėmimui Šios presės privalumai • dideli ryšuliai = mažiau transportavimo • didelė gniuždymo jėga • pritaikyta nuolatiniam darbui Galimi gamybos metai: 2016-2020 Pedera Dddepfx Af Uopr

Būklė: nepatikrintas (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t Ppjdpfx Afeic Rl Dj Uer The hydraulic unit is operational; the drive motor is currently disassembled.

Būklė: naudotas, Gamybos metai: 2007, veikimo valandos: 27 000 h, Funkcionalumas: visiškai funkcionalus, Parduodamos naudotos mobiliosios laužo žirklės. Įrenginį galima apžiūrėti bet kuriuo metu. Podsykzv Hepfx Af Uopr

Būklė: geras (naudotas), Gamybos metai: 2002,

Būklė: naudotas, VIENAAŠIS SMULKINTUVAS WEIMA MODELIS WLK15 PAGRINDINIS VARIKLIS 90 KW Podpfx Afetqd Nde Uepr ROTORIAUS PEILIŲ DYDIS 50X50 (NAUJI PEILIAI) ROTORIAUS ILGIS 1500 MM ROTORIAUS SKERSMUO 370 MM ĮRENGINYS 100% VEIKIANTIS PARUOŠTAS DARBUI

Būklė: naudotas, Gamybos metai: 2024, spalva: pilka-juoda, tuščias svoris: 2 kg, kuro tipas: benzinas, pavaros tipas: mechaninis,

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Ppedovf E Avepfx Af Uor Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naujas, Gamybos metai: 2025, DIE MASCHINE IST WERKSNEU Pjdpfxorc Dkqj Af Uspr Die Maschine ist geeignet zum Pressen (Ballenpressen) von Aluminiumdosen sowie Stahldosen bis zu einer Materialstärke von 0,2 mm und einem Volumen von bis zu 3 Litern. Alle elektrischen und elektronischen Komponenten stammen von den Marken Schneider und Siemens. Die Maschine ist vollständig automatisiert, ausgestattet mit einer SPS-Steuerung und einem Siemens HMI Simatic Touchscreen-Bedienfeld sowie Not-Aus-Tastern. Die Garantie durch AYMAS Makina San. Ve Tic. A. S. beträgt ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden – je nachdem, was zuerst eintritt. Je nach Einsatzgebiet wird die Maschine mit einem Öl-Kühl-/Heizsystem ausgestattet. Der MB 500 Magnetabscheider und der VH (120-250) Vibrationsbunker sind optional erhältlich. Sie dienen zur Trennung von Aluminium- und Stahldosen sowie zur Entfernung von Schmutz und Staub aus dem Schrottmaterial. Technische Daten: Ballenmaß: 500 mm x 330 mm x ... Behälterabmessungen (Breite x Länge x Höhe): 500 mm x 1.000 mm x 330 mm Kapazität: bis zu 1.000 kg/h (Aluminium), bis zu 2.000 kg/h (Stahl) Ballengewicht mit mechanischer Wägeeinrichtung: 10–20 kg Taktzeit: 30 Sekunden Deckelzylinderdruck: 25 Tonnen Hauptpresszylinderdruck: 100 Tonnen Betriebsdruck: 225 bar Maschinenabmessungen (B x L x H): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Būklė: paruoštas naudoti (naudotas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of recyclable material volumes in industrial and commercial applications: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. DIXI 60 SLD horizontal baler, waste baler with tilting device Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Feed opening: 990 x 1110 mm - Machine weight: 5,420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data: - Make: Dixi - Model: 80 SLD - Pressing force: 80 tons - Drive power: 11 kW, 400 V / 32 A - Hopper opening (W x H): 1040 x 1110 mm - Press cycle: approx. 35 s - Throughput: approx. 1,000 kg/h - Bale size (W x H x L): 1120 x 1120 x 1200 mm Pedpfx Asra A E Uof Uspr - Bale weight: depending on material approx. 500–600 kg - Bale binding: triple, manual - Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg - Automatic bale ejection - Robust construction for long-term use - Year of manufacture: 2016-2020 - Weight: approx. 8.4 tons - Condition: Used