Karšto oro siūlių suvirinimo aparatas

Nawon HTM-3788 LD

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, The automatic long-arm zipper sewing machine 5 units Dürkopp Adler 867-290342-100 5 units Dürkopp Adler 467-65-FA Podpovz Tk Hefx Afword Bed-type zipper sewing machines

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Pedpfsfz I Ehjx Afwjrd Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 56 000 h, Parduodama Arburg 570-2000-800 liejimo mašina, 2008 metų. Labai geros techninės ir vizualinės būklės, labai tyliai veikia, nėra jokio alyvos nuotėkio. Selogic valdymas. Bimetalinis liejimo blokas, 45 mm diametras. 1 x oras, 2 x hidraulinis branduolys, roboto išvestis. Mašina parduodama be medžiagos ir spalvos dozatoriaus. Predpfx Afeukirbswed

Sąlyga: naujas, Gamybos metai: 2025, Table length 3000 mm Table width 2000 mm Table height 200 mm Weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 3000 mm • Height 200 mm • Weight 1700 kg • Bore diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection for welding spatter • Maximum load capacity • Improved fatigue strength • Enhanced vibration resistance • Fine scaling • Reinforced with weld seams and ribs on the underside • Optimal working height from 820 to 865 mm • 8 adjustable support legs • With matching accessory set (optional) Our welding tables are manufactured in cast iron quality HT 300 and nitrided in one piece after mechanical processing. Additionally, they feature precise fine scaling, engraved using laser technology. To ensure appropriate stability, our welding tables are reinforced on the underside with weld seams and ribs (see images). They also undergo a 3-day gas nitriding process, which increases the corrosion resistance as well as the fatigue and vibration strength of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 Pjdpfx Afsuia Ntswerd • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 The images do not reflect original size and serve for illustration purposes only. Our welding tables are manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping fixtures – 3D precision welding table

Sąlyga: geras (naudotas), Gamybos metai: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year of manufacture: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) Podpfxjwz I Aco Afwerd 2024: Geometry newly set. Travels: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Controller: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 Machine equipped as follows: - 60-position tool changer - ICS (internal coolant supply, 20 bar) with band filter system - Air through the spindle - Kessler rotary table, diameter 500 mm - Infrared workpiece measurement - 3D probe - Tool measurement via BLUM laser - Rotating sight glass - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction unit - Heidenhain linear measuring systems X, Y, Z - Sealing air for all linear measuring systems - Active electrical cabinet cooler (air-to-air) - Active cooling for 4th and 5th axes, controlled - Network connection + USB port - Regulated spindle chiller - Heidenhain rotary measurement system - Contour protection POSkontur - Exterior hinge-belt chip conveyor - Coolant supply pump at head controlled via M functions - Pump for chip flushing device - Chip flushing device - Machine status beacon - Air at the spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - Triple media interface in table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W: 4,800 / D: 4,600 / H: 3,000 mm + ICS unit (LxWxH): 2,200 x 1,300 x 1,400 mm Weight: approx. 13,000 kg The machine is in excellent condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry set (guides repaired and adjusted). Since then, the machine has seen only limited production usage.

Sąlyga: labai geros būklės (naudotas), Dürkopp Adler 867 – 190322 – M Gold – Triple compound feed (foot and feed dog) – Large rotary hook (26 mm bobbin) – Automatic thread trimmer – Programmable initial and final backtacking (locking) – Speed reduction system active at increased presser foot lift height – Maximum thread thickness 10/3 Nm – Maximum stitch length up to 12 mm (two independent adjustments switchable at any time) – Presser foot lift up to 20 mm – Adjustable presser foot stroke up to 9 mm Pjdpfx Afswxr Nnewjrd – Arm length to needle bar: 335 mm – Maximum sewing speed: up to 3,800 stitches per minute – 230 V motor – Efka Variocontrol 810 – Compressed air required for operation Multiple units of this model available Machine in very good technical condition, ready for immediate use Price per machine: €2,450 net Shipping by courier available

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Working height: 900mm (+/-50mm), max. roll weight: 70kg, max. roll width: 3200mm, cutting width: 3900mm/5000mm, cutting length: 5000mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 7000mm/4500mm. Documentation available. An on-site inspection is possible. Prodpfx Ajv Ifvzjfwjd

Sąlyga: naujas, Gamybos metai: 2025, bendras ilgis: 19 100 mm, bendras plotis: 6 600 mm, bendras aukštis: 5 000 mm, vidinis aukštis: 4 000 mm, vidinis ilgis: 18 000 mm, vidinis plotis: 6 000 mm, We offer the production of foldable, "accordion-type" spray booths in any dimensions and specifications defined by the customer. Sample projects can be seen in the photos. As a manufacturer, we handle the design, production, installation, and warranty service of spray booths. Psdpfx Afsvphfzowjrd Our offer includes a wide range of spray booths – please check our other listings for details. Feel free to contact us.

Sąlyga: naudotas, Gamybos metai: 2024, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 204065, Used Machine CNC Cutter/Plotter Cutting Area X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a driven rotary knife, electrically oscillating knife, and a milling unit (including extraction device) • Multifunctional tool head for accommodating up to 2 interchangeable tools • High-performance vacuum blower for material fixation • Standard equipment includes gray conveyor belt table (Conveyor). Blue-green exchangeable conveyor possible (offers high contrast for dark materials) Additional tools expandable (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angled cutting knife • Printer mark detection • Camera registration • Punch tool for notches or holes • Milling unit with extraction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated by click Rapid Amortization • Low costs with high added value • Optimal material utilization through nest expert software modules (not included) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers Prjdpfx Asif Ek Refwjd • Suitable for both sheet and roll material (can be upgraded with matching unwinder) • Rapid amortization (Product photo is an example) The machine is CE certified.

Gamybos metai: 2012, veikimo valandos: 7 357 h, Sąlyga: paruoštas naudoti (naudotas), Bewegungsachsen X-Achse: 600 mm Y-Achse: 420 mm Z-Achse: 370 mm Zusätzliche Ausstattung Prodjw Nlbqjpfx Afwod Wechselbarer Papierfilter / SEC-10 (C-Achse) / SGF2 Nano-Verschleißeinheit / Feuerlöscher / TMM3 Stromgenerator / Dielektrikum-Kühleinheit / 15" TFT-Touchscreen / Absenkbarer Arbeitsbehälter Linearmotoren (X-, Y-, Z-Achsen) / Glasmaßstäbe in X-, Y-, Z-Achsen / Keramik-Arbeitsbereich / Fernbedienung Zubehör umfasst Elektroden (Graphit, Wolfram und Kupfer), Elektrodenhalter und Spannvorrichtungen mit Dokumentation. Einige Elektrodenhalter mit eingesetzten Elektroden befinden sich noch in der Maschine. Diese Sodick AG60L Senkerodiermaschine wurde 2012 gefertigt. Sie verfügt über einen Keramiktisch mit den Maßen 750 x 550 mm und kann Werkstücke bis zu 1.500 kg aufnehmen. Die Maschine ist mit Linearmotor, Glasmaßstäben und Fernbedienung für höchste Präzision und Bedienkomfort ausgestattet. Nutzen Sie die Gelegenheit zum Kauf dieser Sodick AG60L Senkerodiermaschine. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche EDM (Funkenerosion)