Presas

Presona AB LP 85 VH1

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2013, Roll-off compactor container 20 cbm usable volume for hooklift trucks Aventek RM20 Year of manufacture: 2013 Multiple units available Refurbished, inspected, and serviced Large feed opening Split lid, left/right opening Mounting on both sides Side-hinged discharge door Ramp operation possible Machines are refurbished, inspected, serviced, and repainted in your desired standard RAL color. Knsdowifivspfx Adwed We are happy to provide a quotation including delivery.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Knedeu Thbxepfx Adwed Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 20 580 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 450 kg, įėjimo srovė: 59 A, bendras svoris: 12 000 kg, transporto aukštis: 2 750 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), transporto plotis: 2 300 mm, transporto ilgis: 8 500 mm, bakelio talpa: 300 l, Good day, We hereby offer you, subject to prior sale, a used baling press manufactured by HSM, type VK 4812. The following technical data is taken from the manufacturer's operating manual and brochures; we cannot guarantee the accuracy or completeness of this information. Manufacturer: HSM Type: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Pressing force (main press): 48 t Drive power: 30 kW Machine weight (press): 12 t Kodpfx Ast H Rcajdwond The machine documentation is available in German. An inspection is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: naudotas, Plant: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on the medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates: made of PP Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Operating Principle: The wastewater is fed to the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates inside the clarifier, the water is redirected below the lamellas and then flows upwards through the plates. As a result, solids settle onto the lamellas and the clarified water is directed to the outlet. The solids gradually slide down along the lamella plates, where the sludge funnel is located. Rake Mechanism: Optionally, we offer the inclined clarifier equipped with a rake mechanism, which keeps the sludge in a flowable condition. Kodpfjppyhtjx Adwend Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. By pre-thickening thin sludge, the filter press can be designed with a smaller filter area. The plant is in good condition and is available for rental or purchase. An inspection at our facility can be arranged by appointment. We also offer new inclined clarifiers with a lead time of approx. 8 to 10 weeks!

Gamybos metai: 2008, veikimo valandos: 40 000 h, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2008 (00191), Verkauft durch Bollegraaf Recycling Solutions, dem Originalhersteller dieser Bollegraaf Ballenpresse und Förderband: Kjdpfxskcgf He Adwond Bollegraaf HBC140s Ballenpresse (2x75kW). Ballenpresse: Gewicht: 47.100 kg Baujahr: 2008 Nur mit Hardox-Bodenblech ausgestattet Variable Kanal-Druckregelung Kunststoffventil Hydraulikpumpe über Frequenzumrichter angetrieben Nagetiere-abweisende Verkabelung Tiefenfiltration des Hydrauliköls Modem Betriebsstunden: 40.000 Diese Ballenpresse kann auch vollständig nach den 'Bollegraaf OEM Certified Refurbishment Standards' generalüberholt verkauft werden. Dies beinhaltet 2 Jahre Garantie. Kontaktieren Sie uns für weitere Informationen oder ein Angebot. Allgemeine Prinzipien der Generalüberholung: Reinigung & Demontage Vor Beginn der Überholung wird die Ballenpresse in unserer Werkstatt vollständig gereinigt und zerlegt. Toleranzen Nach der Demontage werden die Toleranzen aller Stahlkomponenten gemessen und wo nötig nachgeschweißt. Dies gilt mindestens für folgende Komponenten: • Pressstempel (Ram) • Rahmen • Kanal • Vorpressklappe Nach Demontage und Inspektion wird der Pressstempel nachgeschweißt und mit neuen Stempelrädern ausgestattet. Die Schutzgitter und die Vorpressklappe werden ausgedellt und falls erforderlich instandgesetzt. Neulackierung Nach der Toleranzmessung und eventuellen Reparatur- und Schweißarbeiten werden alle Komponenten gestrahlt und neu beschichtet. Hydraulik: Der Hydrauliktank wird gereinigt. Alle Hydraulikleitungen und -schläuche werden ersetzt. Die hydraulischen Komponenten werden neu abgedichtet. Das Hydrauliköl wird ersetzt. Verkabelung: Alle Kabel werden überprüft und ggf. ersetzt. Alle Verteilerdosen werden erneuert und an gut zugänglichen Stellen montiert. Verschleißteile: Alle Verschleißteile werden ersetzt. Die Bolzen und Wellen der Zylinder sowie des Kanals werden erneuert. Alle Verschleißteile der Nadelinstallationen und Knoter werden ersetzt. Zylinder: Die Zylinder werden neu abgedichtet und – falls notwendig – mit einer neuen Chromschicht oder Kolbenstange versehen. MCC-Schaltschrank: Der Schaltschrank wird überprüft und gereinigt. Elektronische Bauteile werden falls erforderlich erneuert. Die SPS und das HMI (Bedienpanel) werden durch die neueste Schneider M340 Version inkl. neuester Software ersetzt.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set Kedpfx Adeu Thhrjwend - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Sąlyga: naudotas, Drilling capacity in steel (diameter): 60 mm Throat depth: 400 mm Total power requirement: 4.4 kW Machine weight approx. 1.7 t O F F E R We can offer you, subject to prior sale and errors, ex stock, without obligation: ALZMETALL Heavy-duty column drilling machine Model AB 5/S Year of manufacture approx. (1983) Serial number 183 _____ Drilling capacity in steel 50 mm Drilling capacity in cast iron 65 mm Spindle taper MK 4 Throat depth 400 mm Column diameter 220 mm Spindle stroke 240 mm 5 feed rates 0.1/0.2/0.3/0.4/0.5 mm/rev Table size 700 x 500 mm Vertical table adjustment approx. 600 mm Table rotation around column 360° Height from lower table to drill spindle 1,128 mm Spindle speed range Stage 1, variable 30 – 135 / 135 – 600 rpm Stage 2, variable 60 – 270 / 400 – 1,250 rpm Total drive approx. 4.4 kW - 380 V - 50 Hz Knsdswftt Ispfx Adwed Weight approx. 1,700 kg Accessories / Special features • Very robust column drilling machine! • Automatic quill feed with depth stop and shut-off • Table size approx. 700x500 mm • Quill stroke with adjustable depth stop Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We always have further pillar and column drilling machines in stock, please contact us with your enquiry.

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Knodpfx Adsu Thypowed Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t Knodpfx Adeic Rl Dowod The hydraulic unit is operational; the drive motor is currently disassembled.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Kodovwlqqspfx Adwsnd Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.