Balu presas

Presona AB LP 100 CH2 S

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Kedpfx Alefx Hv Hsbedl Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test Kdsdpfx Alovf E Avsbjl - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naudotas, Adhesive application Glue application Adhesive spreading Kjdpfx Alscht Nyebodl - Glue application for package heights up to 300mm using 1 application roller - Driven by a 0.37 kW worm gear motor - 1 piece left - 1 piece right - Suitable for DIMTER HK 200 and HK 400 DIMTER spare parts DIMTER accessories

Būklė: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 18 520 h, Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; fully equipped with ABB frequency converter, Cooling unit Control panel Hopper Drive motors: 200 kW Kedpfxowxmb Ee Albsdl Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible by appointment. Delivery time: immediately

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Kodpfx Asv T I Evelbodl Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: naudotas, Gamybos metai: 2022,

Gamybos metai: 2012, veikimo valandos: 1 h, būklė: naudotas, Transmission: Automatic Power: 1 kW (1 hp) Unladen weight: 20,000 kg For further information, please contact Emal Jaweed. Scrap press, Hassel Ariete 480, Bonfiglioli crane, year of manufacture: 2012, Length: 9,600 mm, Width: 2,500 mm, Height: 2,820 mm, Weight: 20,000 kg, Engine: 6-cylinder Deutz, Setup: hook-lift / easy relocation, Video available Miscellaneous: * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt/Main airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. Ksdpox R T D Dsfx Albodl * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * Only the general terms and conditions (AGB) of Jaweed GmbH apply to the purchase of vehicles / used machinery. * Further information as well as our terms and conditions can be found on our website.

Būklė: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Automatinė kanalinė presas BOA Continu 25 LB + transporterio juosta. Presas geros būklės, reguliariai prižiūrimas. Neseniai visiškai suremontuota Denison siurblys. Veikia nuolat. Susisiekite su mumis dėl papildomos informacijos. Kodew S Tv Uepfx Albodl

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, - Mašina labai geros techninės ir vizualinės būklės - Prieinama iš karto - Pardavimas apima: Kdedpfsy Dc Nvex Albel - Metalo žirklės: Zato FCE40 arba Genesis GXP400R - Strėlė - Papildomi priedai prieinami už papildomą mokestį

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 8 900 h, mašinos/transporto priemonės numeris: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum volume output under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7-9 t/h - 50 kg/m³ = 8-9 t/h Kjdpfx Aoyrhi Njlbedl - 100 kg/m³ = 11-14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Charging chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs. - Pressing force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank capacity: 600 l - Electric motor power 400 V, 50 Hz: 1 × 45 kW - Oil cooler: 1 × 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Press, control cabinet, operator panel, conveyor belt for sale. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We do not accept any liability for technical information or possible errors. Video material can be provided upon request.