Presona Ab Lp 100 Ch2 S pirkti naudotą (83 490)

Būklė: geras (naudotas), Gamybos metai: 2008, veikimo valandos: 24 629 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 650 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 24 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 1 350 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 10 000 mm, Good day, We hereby offer you, without obligation, a used baling press manufactured by Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presona AB, Sweden Ljdpfx Aboymmmporsab Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific press force: 81 N/cm² Pre-press flap force: 50 t Charge box dimensions: 1,650 x 1,100 mm Filling volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only, after disassembly): approx. 25 t Note: The machine has been used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced in July 2026 with a new, larger press. Until then, the machine can be inspected in operation with material input. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Laedpfxsy S Ru Ao Abrjb Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 30 143 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 800 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced Laodpfx Aboy S Rtljrsb - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: Ljdsv T I Evspfx Abreab The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: geras (naudotas), Gamybos metai: 2017, Flat gear motor, geared motor, electric motor, electro-geared motor, flat geared motor, flat gear motor - Manufacturer: Nord, flat geared motor - Model: SK 2282A-100 LP/4 TF i= 10.15 - Speed: 144 rpm - Motor: Model SK 80 L/4 - Power output: 2.20 kW - Hollow shaft: Ø 35 x 140 mm - Protection class: IP55 - Dimensions: 450/270/H330 mm Lajdpfst Hy Tbjx Abrjb - Weight: 53 kg

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: ribota funkcionalumas, bendras svoris: 150 kg, GRUNDFOS electronically controlled dry-running pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-stage inline pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA motor We offer a Grundfos electronically controlled dry-running pump. ⭐︎ Condition: good (used) The electronically controlled dry-running pump is used but operational. The pump was working flawlessly up until a few weeks ago when it was removed. Manufacturer: Grundfos Type: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with variable-speed MGE motor Frequency converter: integrated Pump speed: 2,930 rpm Nominal flow rate: 135 m³/h Nominal head: 20.1 m Mechanical seal: BAQE Pump housing: cast iron Impeller: cast iron Gross weight: 157 kg For further data, please refer to the nameplate. Scope of delivery as shown. Inspection before purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Laodpfjyc T Apex Abrjb Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge nozzles in inline design. The suction and discharge nozzles have the same diameter. The pumps are designed according to the top-pull-out principle, meaning the pump head (motor, head piece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the pipework. The pump is fitted with a non-balanced rubber bellows-type mechanical seal. The mechanical seal complies with EN 12756. Pipe connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump is equipped with a fan-cooled permanent magnet synchronous motor. The motor efficiency level meets class IE5 according to IEC 60034-30-2. For speed control, the motor is fitted with a frequency converter and PI controller, both housed in the motor terminal box. The electronic speed control enables continuous adjustment of the motor speed and thus the pump performance according to current demand. The pump is equipped with a differential pressure sensor.

Būklė: geras (naudotas), Techniniai duomenys apie padėklinių stelažų statramstį: Stelažų sistema: Dexion Tipas: S 4 Komplektą sudaro: 01x padėklinio stelažo statramstis, naudotas Medžiagos spalva: sendzimir cinkuotas Tipas: H Profilio matmenys: 81,7 x 77,21 x 2,5 mm Įskaitant skersines ir įstrižaines, pado plokštes Statramščiai yra iš anksto surinkti (įsraigtuota konstrukcija) 11.050 mm aukščio 1.100 mm gylio Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė parduodama tik atsiėmimui. Jei reikalingas pristatymas arba šios prekės siuntimas, tai bus susiję su papildomomis išlaidomis, kurias galima sužinoti Laedpfx Aoxxq Tvobrjb atsižvelgiant į pristatymo vietą ar apimtį.

Būklė: naujas, APPC1740T-WL-B 17" Panel PC SN:TABI11000223, manufacturer unknown, unused in opened original packaging, 100% functional, scope of delivery as per photos. Lajdpfx Ajp Ilk Sjbrsb

Būklė: geras (naudotas), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes and load capacities available) - Secondary beam: Sigma 410 mm (220 mm & 260 mm also available) - Decking: Chipboard P6, double-sided laminated, 38 mm - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 pure white - Condition: used Large quantities available directly from stock in Nordhorn. The IPE 600 allows for large spans! Scope of delivery: Lasdpfx Aegpxf Hebrob - Columns - Main and secondary beams - Diagonal bracing - Floor decking PRICES: from €40.00 net per m² Prices vary depending on configuration (load capacity and column spacing). Please contact our team. We will be pleased to advise you. Optional accessories - Railings - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the place of delivery and the scope of the shipment and can be provided on request. TERMS OF PAYMENT Terms of payment are to be agreed in the event of an order. The price is per unit/net, or as otherwise specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machines for trade, industry, and craft. We continually offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four wins – The four building blocks of DLK’s success – Warehouse technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, Gamybos metai: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a permanently installed water separator that removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off system is included. It starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully operational and space-saving, pre-mounted in a mesh box. All that is required is to connect the compressed air supply and fill with blasting media. Transport can be easily handled using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminium storage box is mounted on the unit. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety shut-off system - Blasting media sieve - Lid - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, selectable diameter: 6 mm, 8 mm or 10 mm - Sandblasting helmet RED 2 - Sandblasting overall, nylon/cotton - 1 pair of leather blasting gloves Lajdpfewc Ri Iex Abreb - 10 m breathing air hose, fully assembled - Breathing air filter/activated carbon filter SAF - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for the hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminium box Technical data for the pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV tested with certificate - Fixed 1" piping inside and outside - Rubber-coated metal cone with rubber gasket - Large hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Overall height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight approx. 75 kg Dimensions mesh box: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Baler Presona LP 85 VH2 with cross-tie, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Laedpfxsyz Snps Abreb Theoretical throughput volume: 1200 m³/h Throughput rate at 30-100 kg/m³: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions (press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight approx. 27,000 kg The press was dismantled from ongoing operation. Technical documentation is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the accuracy of the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is made on advance payment ex works, without warranty or guarantee.

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0.7 A - 50 Hertz - IP65 Lsdpjk Eakvjfx Abrsab

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Lodpelatz Dofx Abrjab Electrical specifications: - 230 V - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, galia: 22 kW (29,91 AG), paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 530 m³/val, Technical Data Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pcs (as of April) Lsdpfjy R Npiox Abrsab Main press force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/h Throughput under working conditions: 260 m³/h Feed opening dimensions: 1,250 x 1,100 mm Chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm (variable length) Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: 6 to 7 t/h - 50 kg/m³: 7 to 9 t/h - 100 kg/m³: 11 to 14 t/h Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank volume: 600 L PLC: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press: approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General Work: - Machine cleaned, derusted, primed, and partially painted - Wire ingress marks in the press channel welded and smoothed Hydraulic Unit: - Hydraulic oil tank drained, tank cleaned, filled with new oil - Oil and air filters replaced - Leaking oil sight glass on the tank replaced - All hydraulic hoses replaced Electrical System: - Program menu language set to English - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on control cabinet replaced - Flap limit switch replaced - Electrical system for the agitating device renewed, connected, and tested Press Ram: - All four press ram guide rollers removed and replaced - Main hydraulic cylinder dismantled, disassembled and partially overhauled (cylinder barrel honed, complete seal kit replaced, tightness test performed) - All plastic wear pads on the press ram replaced Pre-press Flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled and partially overhauled (cylinder barrels honed, complete seal kits replaced, tightness test performed) - Scraper flap on the pre-press renewed Tying System: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister unit below the twister fingers replaced Scope of delivery: Only the baler is being sold. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagram) is available. Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.

Būklė: naudotas, didžiausias leistinas svoris: 574 kg, bendras svoris: 750 kg, ašių konfigūracija: 1 ašis, pirmoji registracija: 08/2022, krovimo vietos ilgis: 2 600 mm, krovinių skyriaus plotis: 1 550 mm, krovos erdvės aukštis: 145 mm, bendras plotis: 2 047 mm, bendras aukštis: 905 mm,

Būklė: labai geros būklės (naudotas),

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 570 kg, Gamybos metai: 2019, Two units available Ledpfovz Drhjx Abrsab Machine type: Engine-driven pump Machine brand: ATLAS COPCO Model: WEL PST 100 CNP Year of manufacture: 2019 Operating weight (kg): 1570 Engine type: Hatz 2G40 /diesel/ Engine power (kW): 9.8 Engine displacement (cm³): 997 Fuel type: diesel Maximum capacity – 100 m³/h Maximum head – 20 m Suction pipe diameter – 100 mm Discharge pipe diameter – 100 mm The Atlas Copco WEL PST piston pump is a high-performance device suitable for demanding applications requiring 24/7 operation. It is designed to ensure fuel efficiency.

Būklė: naujas, Gamybos metai: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC turning center with sub-spindle, driven tools, and true Y-axis, 35° slant bed Max. swing diameter: 650 mm Max. turning diameter: 320 mm Max. turning length: 550 mm Linear roller guides on all axes Rapid traverse X/Z/Y: 20/20/12 m/min Y-axis travel: 140 mm (+/- 70 mm) Turret: 12 stations, BMT55 All 12 stations driven Max. speed: 4,000 rpm, 3 kW motor Main spindle: Chuck diameter: 254 mm Spindle nose: A2-8 Max. bar capacity: 75 mm Spindle bore diameter: 86 mm Drive power (direct drive): 15/16 kW Max. speed: 3,500 rpm Sub-spindle: Chuck diameter: 152 mm Spindle mounting: A2-5 Max. bar capacity: 46 mm Drive power: 11 kW Max. speed: 3,000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard accessories: Parts catcher preparation Hinged belt chip conveyor Oil skimmer Coolant system 3-color signal light Work area lighting Centralized lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Lsdpfowwvldex Abroab The machine is exhibited at EMO, Hall 12/D10, and is available for immediate delivery afterwards. A wide variety of automation systems, such as bar feeders and loading robots, are available.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, mašinos/transporto priemonės numeris: 2455698, galia: 41 kW (55,74 AG), keliamoji galia: 750 kg, stiebo tipas: teleskopinis, kėlimo aukštis: 26 000 mm, platformos ilgis: 5 480 mm, platformos plotis: 2 440 mm, bendras svoris: 18 000 kg, transporto ilgis: 5 960 mm, transporto plotis: 2 500 mm, transporto aukštis: 3 200 mm, kuro tipas: dyzelinas, spalva: raudona, Techniniai duomenys Pagaminimo metai: 2010 Variklis: dyzelinis Darbinis aukštis: 28,00 m Platformos aukštis: 26,00 m Platformos praplėtimas: 2,13 m Platformos matmenys (I x P): 5,48 m x 2,44 m Bendri matmenys (I x P x A): 5,96 m x 2,50 m x 3,20 m Lasdpfx Asyqzrzsbreb Keliamoji galia: 750 kg Valdymas: proporcinis Kopimo geba: 40% Svoris: 18 000 kg Važiavimo greitis: 0,7–4,0 km/val. Visų varančiųjų ratų pavara bendri naudojimo pėdsakai, visiškai veikiantis

Būklė: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Siūlome šį naudotą GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P oru aušinamą vandens grąžinimo aušintuvą, pagamintą 2017 metais. Laedpfx Absy Akgyjrob Projekto numeris: 101048869 Įrenginio pavadinimas: S-GFHE 080.5/A-N(S)-G4/2P Įrenginio serijos numeris: 404549442/19.02129 Pagaminimo metai: 2017 Aplinkos temperatūra min.: -30,0 °C Aplinkos temperatūra maks.: +50,0 °C Tūris: 116,2 l Leistina temperatūra (TS) min.: -50,0 °C Leistina temperatūra (TS) maks.: +100,0 °C Bandymo slėgis: 11 bar Ventiliatoriaus apsisukimai: 2609 aps./min Ventiliatoriaus srovė: 22,4 A Jei turite klausimų arba reikia daugiau informacijos, prašome parašyti mums žinutę arba paskambinti.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 2451648, keliamoji galia: 600 kg, kėlimo aukštis: 30 150 mm, platformos ilgis: 5 800 mm, platformos plotis: 1 200 mm, bendras svoris: 21 500 kg, transporto ilgis: 6 420 mm, transporto plotis: 1 390 mm, transporto aukštis: 3 190 mm, kuro tipas: elektrinis, spalva: mėlyna, Įranga: UVV saugos patikra, visų varančiųjų ratų pavara, Technical Data Year of manufacture: 2017 Motor: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Laedeyqzcaepfx Abreb Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25% Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, mašinos/transporto priemonės numeris: 2451638, keliamoji galia: 600 kg, kėlimo aukštis: 30 150 mm, platformos ilgis: 5 800 mm, platformos plotis: 1 200 mm, bendras svoris: 21 500 kg, transporto ilgis: 6 420 mm, transporto plotis: 1 390 mm, transporto aukštis: 3 190 mm, kuro tipas: elektrinis, spalva: mėlyna, darbinė masė: 21 500 kg, Įranga: UVV saugos patikra, diferencialo užraktas, visų varančiųjų ratų pavara, Techniniai duomenys Ledpfx Aeyqytwebrjab Pagaminimo metai: 2018 Variklis: Elektrinis Darbinis aukštis: 32,15 m Platformos aukštis: 30,15 m Platformos prailginimas: 1,90 m Platformos matmenys: 5,80 x 1,20 m Nominali apkrova: 600 kg Važiavimo greitis: 0,7 – 3,0 km/val. Įkalnės įveikimas: 25 % Matmenys (I x P x A): 6,42 x 1,39 x 3,19 m Pilnai veikiantis Bendri naudojimo požymiai

Būklė: naudotas, rida: 16 465 km, galia: 75 kW (101,97 AG), pirmoji registracija: 10/2022, kuro tipas: dyzelinas, tuščias svoris: 1 600 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 05/2028, kuras: dyzelinas, energinis efektyvumas: B, CO₂ emisijos: 172 g/km, kuro sąnaudos (mieste): 7,2 l/100 km, kuro sąnaudos (užmiestyje): 5,7 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: mechaninis, sėdimų vietų skaičius: 3, Įranga: borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas, oro pagalvė, suodžių filtras,

Būklė: naujas, Pressure: 100 Bending length: 3020 mm Frame gap: 2555 mm Installation height: 530 mm Stroke (max.): 300 mm Throat depth: 450 mm Dimensions (LxWxH): 3725 x 2260 x 2780 mm Approx. weight: 8,550 kg 4 CNC axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphical control) CNC crowning via control: Yes, via CNC control Esa S630 (2D graphical control) Motor power: 11 kW Technical specifications XL 30100 Unit | Value -----|----- Bending length | 3020 mm Bending force | 100 t Approach speed | 160 mm/s Bending speed | 10 mm/s Return speed | 150 mm/s Stroke (max.) | 300 mm Throat depth (D) | 530 mm Installation height / daylight (E) | 450 mm Frame gap (B) | 2555 mm Machine length (L) | 3725 mm Machine width (W) | 2260 mm Width w/o front gauge (Y) | 1690 mm Maximum height | 2780 mm Main motor | 11 kW Oil tank capacity | 190 l Machine weight | 8,700 kg Ledpfx Abed En Rxjrjab The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile application capabilities. The Europa XL features an exceptionally large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also above average, ensuring maximum operational flexibility. We focus on quality, which is reflected in the machine control system as well. As standard, we provide the high-grade Esa S640 (2D graphical control). In addition, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes controlled via the Esa S640 system. Of course, CNC crowning control via Esa S640 (2D graphical control) is also included. We make no compromises on upper tools and dies either, fitting the KKI EUROPA XL CNC press brake with premium tooling from EUROSTAMP Italy. Naturally, a machine is only as good as its service. That’s why we prioritize highly qualified staff with extensive experience in CNC sheet metal processing. • CNC axes: Y1, Y2, X, and R • Esa S640 (2D graphical control) • Backgauge with double linear guide and ball screw • Motorized crowning device with CNC control • 2 front support arms, heavy-duty version, height-adjustable via handwheel; from 175 t and up, heavy-duty version on linear guides • Laser safety device on the upper beam • CE safety equipment • Various options available Other available controls: - ESA 640 2D 15'' touchscreen control: €4,520 incl. - ESA 675 W 3D 21'' touchscreen control (Windows-based): €6,485 - DELEM 66 T 2D 17'' touchscreen control (Windows-based): €10,165 - DELEM 69 T 3D 17'' touchscreen control (Windows-based): €16,350 KK-Industries GmbH There’s something for everyone!

Būklė: naujas, Pressure: 100 Bending length: 2600 mm Frame width: 2150 mm Installation height: 530 mm Lasdped En Ryefx Abrsb Stroke length (max.): 300 mm Frame depth: 450 mm Dimensions (LxWxH): 3320x2260x2780 mm Approx. weight: 7900 kg 4 axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphic control) CNC crowning via controller: Yes, via Esa S630 (2D graphic control) Motor power: 11 kW Technical Specifications XL 26100 Unit: - Bending length: 2600 mm Bending force: 100 t Lowering speed: 160 mm/s Bending speed: 10 mm/s Return speed: 150 mm/s Stroke: 300 mm Throat depth (D): 530 mm Installation / clearance height (E): 450 mm Frame gap (B): 2150 mm Machine length (L): 3320 mm Machine width (W): 2260 mm Width without front stop (Y): 1710 mm Max. height: 2780 mm Main motor: 11 kW Oil tank capacity: 190 l Machine weight: 7700 kg Model: KKI EUROPA XL The robust EUROPA XL press brake is characterized by its high precision, accuracy, and versatile range of applications. The EUROPA XL offers a very large installation height resulting in a long stroke (cylinder travel). It also features an above-average throat depth for maximum flexibility. We focus on quality, which is also reflected in the control system. Our standard control is the high-quality ESA S640 (2D graphic control). Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Of course, the CNC crowning control ESA S640 (2D graphic control) is also included. We also make no compromises when it comes to the upper tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service. That’s why we focus on highly qualified staff with many years of experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R axis ESA S640 (2D graphic control) Back gauge with dual linear guides and ball screw drive Motorized crowning with CNC control 2 heavy-duty front support arms, height adjustable by handwheel (from 175 t heavy-duty type with linear guides) Laser safety device on upper beam CE safety equipment Various options available Additional controllers: ESA 640 2D 15'' touchscreen control – €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows-based) – €16,350 KK-Industries GmbH There’s something for everyone!