GRAULE ZS 85 N kryžminio pjovimo ir įstrižinio pjovimo pjūklas - pakreipiamas -

Abläng- und Gehrungskreissäge GRAULE ZS 85 N

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Psdpfx Adexnlgcszspt Location: Garbsen

Gamybos metai: 1988, būklė: reikia remonto (naudotas), Mechanizavimas įvedimui prieš obliavimo stakles, tinkama KVH/BSH ir pan. Rekomenduojama ruošiniams iki maždaug 13 m ilgio. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis iškrovimas – gaminių atskyrimas. 4 vnt. šoniniu būdu reguliuojamų diskinio pjūklo atpjovimo įrenginių. Pjūvio matmenys: 180 x 220 mm, 150 x 300 mm. Užtenka vieno operatoriaus. Psdsvbtpjpfx Adzopt

Būklė: naudotas, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Grooving Machine FZS-2 Electronic, with stepless grooving spindles and automatic roller table ----- Crosscut Saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 RPM Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm diameter extraction port 2 grooving spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 RPM Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both grooving spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys Psdpfowgwlkox Adzspt * Safety and extraction hood with 180 mm diameter extraction port * Automatic brake with speed monitoring Swivel Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block in the cutting plane at every angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction port diameters: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show the same model. Original images not yet available. (Technical data as per manufacturer's information - no guarantee!) All prices are net, plus statutory VAT.

Būklė: naujas, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether it's for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be efficiently processed with maximum precision, straightforward handling, and outstanding cut quality. The saw unit, which can tilt to one side, also enables angle cuts. The smooth-running double roller carriage based on the Altendorf system, as well as digital height and tilting display, are standard features. A machine equally suited for both beginners and professionals. Podpju R S Hcjfx Adzopt Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Preparation for subsequent installation of a scoring unit ----- Technical Specifications ----- Tilting range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. blade projection: 104 mm Non-CE version: Max. saw blade Ø: 350 mm, Max. blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speeds: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood available as an option - - New display machine -

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. Pedpfx Adeu R Szaszopt - New exhibition machine -

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, 1 overhauled Paul slat separator, 2-slat design, right fixed slat, left movable slat (for left-handed machine) Total length: 5.50 m Ppedpotx A Sxofx Adzet Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm For max. timber length: 5.00 m 8 driven spiral rollers and 3 driven, smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable slat runs smoothly on 4 ball-bearing mounted supports, equipped with a new roller chain and 11 new guide wheels. Sturdy sheet metal lining between all rollers. As-new condition.

Būklė: naujas, Gamybos metai: 2026, Pilnai automatinis vidutinių ir didelių aliuminio profilių pjovimas su lengvai naudojama automatizacija. Padėkite bet kokį aliuminio profilį – įrenginys automatiškai jį aptiks ir supjaustys pagal užduotis, naudodamas didelio tikslumo servovariklio medžiagos padėties nustatymą. Excel užduočių sąrašų įkėlimas per WIFI leidžia efektyviai įkelti didelius pjovimo sąrašus. Kiekvieną jūsų dedamą pjauti aliuminio ruošinį, nepriklausomai nuo ilgio, lazerinis jutiklis išmatuoja jo ilgį. Naudojant galingą optimizavimo algoritmą realiuoju laiku apskaičiuojama geriausia dalių gamybos seka, kad atliekų kiekis būtų minimalus. Mašina automatiškai atlieka apskaičiuotą pjovimų sąrašą nenutrūkstamai. Jums nereikia jokių papildomų įvestų duomenų – tiesiog nuolat dėkite naują aliuminio žaliavą. Paprastas, greitas alternatyvus sprendimas dvigalvėms pjovimo staklėms. Tiesiog įveskite (arba importuokite) reikalingus ilgius ir kampus ir paspauskite „START“. Įrenginys nenutrūkstamai aukštu tikslumu gamina Jūsų kampines detales dideliu greičiu. • Pilnai automatinė pjovimo operacija su profilio padavimu ir ilgio pjovimu. • Paprasta vartotojo sąsaja automatiniam valdymui – suveskite užduotį ir pradėkite pjauti per kelias sekundes. • Supaprastintas dalių, partijų ar didelių excel sąrašų pjovimas. • Paketinė / kelių profilių vienu metu pjovimo bei skaičiavimo funkcija. • Nuotolinis WIFI excel užduočių sąrašų įkėlimas su plačiomis duomenų žemėlapio galimybėmis. Ppsdpfx Adof Ekn Ijzot • Pilnai reguliuojami pjūklo pjovimo ir tiekimo greičiai maksimaliai proceso produktyvumui. • Automatinis optimizavimo režimas su profilio ilgio lazeriniu matavimu ir pjovimo optimizavimu (pasirinktinai). • Automatinis etikečių spausdinimas detalėms pagal užduočių sąraše esančius duomenis (rankinis etiketės klijavimas, pasirinktinai). • Tiesioginis ženklinimas ant ruošinio be operatoriaus įsikišimo (pasirinktinai). • Brūkšninių arba QR kodų spausdinimas arba nuskaitymas užduoties įkėlimui (pasirinktinai). • Automatinis servopavara valdomas pjūklo galvos pasukimo kampo nustatymas iki ±75° (pasirinktinai). Idealiai tinka: • Langų ir durų gamybai • Kampuotų aliuminio konstrukcijų gamybai • Aliuminio konstrukcijų gamybai • Kompozitų gamybai • Žaliuzių, roletų ir baldų gamybai • Aliuminio žaliavos prekybai Modelis: A550 Ilgis: 3 m Linear Unit: ProfiStop Alpha Medžiagos ilgis: 1680 mm Stūmimo galia: 20–40 kg Programinė įranga: Optimiser AUKŠČIAUSIOS KOKYBĖS AUSTRALIJOS GAMYBOS TECHNIKA.

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Mašina za bušenje rupa za tiplove URBAN DB 3100, godina proizvodnje 2007. Stanje: veoma dobro Ppjdpfx Aowinq Nedzet - Sistem za stezanje profila i posmak burgije upravljani nožnim prekidačem - Električni motor za bušenje se automatski isključuje na kraju bušenja - Brzina posmaka burgije i dubina bušenja pojedinačno podesivi - Brzostezna glava za standardne burgije do maks. Ø13 mm - Pomoćni stočići levo i desno

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-KBK1, DEMAG KBK Crane Ceiling Crane Runway, dimensions approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 KG - 0.125 t Technical data of the system: - Crane runway made from Demag KBK1 rails System is delivered complete: - KBK rails, rail connectors, traveling gears, end plates, cable trolley, power supply, supports/hangers, etc. Includes 1 bridge with 125 KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Ppsdpfx Adopiarnszet Item location: 75053 Gondelsheim Dispatch by freight or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125KG - 1600KG Please inquire about your crane runway with required load moment and dimensions.

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400 mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Ppedswu Ez Nepfx Adzot