Mütek Systemtechnik Mrz 630 pirkti naudotą (1 968)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) Ijdpfxjdwktkj Ab Nsti - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net Isdpfx Abob Ny Eys Noti - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Itjdev Rpxlepfx Ab Nji Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm Itodpfx Abegl Nlms Nsi - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Itjdpfxschuvro Ab Noi Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Iedpegfm Ryofx Ab Njti Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Itjdsffh Atopfx Ab Nei Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Airflow 1850 m³/h / 400 V Iodpfxsrb D Nj Ab Neti

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: Iedpfxsgmfa Aj Ab Njti - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Demonstracinis modelis, naudotas 7 valandas. Prieinamas iš karto (iš gamyklos Neckartailfingene). Šiukšlinimo įrenginys MRZ 830 Prekės kodas: 84659600 Pagaminimo metai: 2023 Įleidimo anga: 800 x 1000 mm Variklis: 22 kW; 400 V - 50 Hz - 3 fazės Peiliai: daugybę kartų pasukami Hidrauliniu būdu valdomas stūmoklis Sieto skylės pagal pasirinkimą (10–40 mm) Svoris: apie 1600 kg Matmenys (ilgis x plotis x aukštis): apie 2290 x 1420 x 1750 mm Turbininė sankaba Standartinė komplektacija: - automatinis žvaigždės/trikampio paleidimas - greita hidraulika - automatinis išjungimas, kai rotorius neveikia - 70–90 aps./min. greitis, užtikrinantis didelį našumą - ciklinis valdymas, skirtas išvengti neveikimo laikotarpių - našumą didinanti hidraulinio stūmoklio žingsninė kontrolė - „Pertinax“ kreiptuvai hidrauliniam stūmokliui - vibraciją slopinančios mašinos kojelės - CE sertifikatas Šis smulkintuvas skirtas natūralios medienos, gipso kartono ir MDF plokščių bei kitų medžiagų smulkinimui, po to, kai gamintojas jas išbandys ir patvirtins. Įskaičiuota: - smulkintuvo pakėlimas 30 cm (paruošimas konvejerio juostai) Papildomos smulkintuvo funkcijos: - lenkta konvejerio juosta + 8770 EUR (be PVM) Horizontalioji dalis: 1200 mm Pakylioji dalis: 2500 mm Kampas: reguliuojamas nuo 0 iki 60 laipsnių Išleidimo aukštis: apie 2000 mm + - 100 mm Iodpfx Absv Sqrpe Nsti - magnetinis atskyriklis + 6780 EUR (be PVM) - konvejerio juostos ir magnetinio atskyriklio valdymas + 2750 EUR (be PVM) (paleidimas ir sustabdymas sinchronizuojami su smulkintuvu) Žaliavos reikalavimai: - drėgmės kiekis (atro) turi būti mažesnis nei 30 % - metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir kt., sukelia didesnį nusidėvėjimą

Būklė: naujas, Gamybos metai: 2026, Production time approx. +/- 4 months The optimal machine for shredding, e.g., pallets and wood residues. * Prepared for extraction, see pictures 4 and 5 without additional accessories such as display hopper or conveyor belt cut-out Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph with turbo coupling included Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knives: 76 pieces, reversible multiple times Knife dimensions: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Iodod Hkqhepfx Ab Neti Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - V-rotor for maximum throughput - 2nd knife row on rotor - Control cabinet with Siemens PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry + Adapted pusher control + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Extraction connection Ø 160 mm Iodpfx Aogmh H Teb Neti Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. Itjdpfod H R Sxjx Ab Nsi --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Itjdpfsd E R D Ssx Ab Nei Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. Itedpfxjd Db N Is Ab Nji We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (upon arrival) must be below 30% Itsdpfxod Dgw Ue Ab Nsi - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Reikalavimai žaliavai: Itedpfx Aowzarcsb Nji - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: geras (naudotas), Gamybos metai: 2014, Gamintojas: DEMAG Itodpfoyu R Dzox Ab Nei Keliamoji galia: 860 kg + 630 kg (įrengta su dviem kranais) Tikslūs techniniai matmenys parodyti nuotraukose Kranų bėgį galima prailginti nuotraukose parodytomis konstrukcijomis ir kojomis, tačiau prailginimui reikalingi ir kiti bėgių elementai, kurių nėra!!

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7915 TECHNINIAI DUOMENYS volo plotis: 640 mm peilių skaičius: 4 vnt maks. apdirbamos detalės storis: 200 mm – iš viršaus: šliaužikliai/atmetės įvorių velenas dantuotas, tempiantis spaustuvas obliavimo velenas spaustuvas sklandus išvedimo velenas, tempiantis – iš apačios: reguliuojami ritinėliai apatinėje plokštėje: 2 vnt variklis: 7 kW sklandus padavimo greičio reguliavimas matmenys (ilgis/plotis/aukštis): 1800x1250x1150 mm svoris: 1250 kg PRIVALUMAI Itsdpfx Aoy S Af Teb Nei – bulgariška gamyba – sklandus padavimo greičio reguliavimas – naudota storio obliavimo staklės, labai geros būklės Grynoji kaina: 9500 PLN Grynoji kaina: 2260 EUR (pagal 4,2 EUR kursą) (Kainos gali keistis priklausomai nuo didesnių kurso svyravimų)

Būklė: naudotas, Gamybos metai: 2021, „Sema Systemtechnik 1200s“ – dėžių surinkimo įrenginys Ijdpfx Aezmakasb Nsti sudėtyje yra „Nordson ProBlue Liberty 14“ karštojo lydalo įrenginys. Dėžės matmenys: 455 x 400 mm (sulenkta – 300 x 195 x 30 mm). Būklė: gera. Vieta sandėlyje: E3.

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, it enables the marking of almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. Laser technology has become indispensable for permanent marking in many industries. The powerful laser software allows you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge required. The software can automatically increment serial and article numbers after prior configuration. Furthermore, it can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral arms for marking long parts, movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W or 50W • Laser class 1 Itjdpfx Asxd A I Asb Nei • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Marking software: EZCAD (German/English) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Aluminum profile frame • Air-cooled • Door width: approx. 700 mm / Pass-through height: 400 mm • Power supply: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 30 W, aušinimo tipas: oras, bendras plotis: 400 mm, bendras aukštis: 690 mm, bendras ilgis: 600 mm, bendras svoris: 45 kg, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, reikalingas aukštis: 900 mm, lazerio bangos ilgis: 1 064 nm, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 35 °C, įėjimo dažnis: 50 Hz, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact tabletop unit with a small working area, making it ideal for small parts or, for example, for marking nameplates. Due to its compact design, the system is extremely practical and can be used anywhere. The device is very easy to operate and requires no programming knowledge. With its powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming skills. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm Iedpjy I Nbmofx Ab Nsti - Grid bores for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: extraction unit (incl. activated carbon filter) - Welded construction, sheet steel - Power supply 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact desktop device with a small working area, making it ideal for small parts. Thanks to its minimal footprint, the system is highly practical and can be used anywhere. The device is very easy to operate, even without programming knowledge. With its powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without requiring advanced programming skills. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Itodpfswkpxksx Ab Nei - 30 Watt fiber laser (optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - EZCAD marking software in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: fume extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - 230V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 064 mm, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 30 W, aušinimo tipas: oras, bendras plotis: 1 500 mm, bendras aukštis: 2 050 mm, bendras ilgis: 900 mm, darbo diapazonas: 600 mm, bendras svoris: 120 kg, garantijos trukmė: 12 mėnesiai, aukščio reguliavimo tipas: elektrinis, durų angos plotis: 700 mm, durų angos aukštis: 400 mm, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, stalo ilgis: 600 mm, stalo plotis: 600 mm, reikalingas plotis: 1 550 mm, reikalingas aukštis: 2 100 mm, lazerio bangos ilgis: 1 064 nm, darbinio aukščio: 950 mm, įėjimo dažnis: 50 Hz, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. The integrated fiber laser allows you to mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser has become indispensable for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setup. Additionally, the software can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available on request. Made in Germany Fiber laser 30 watt • Laser class 1 • Wavelength 1064 nm • Marking field size 150 x 150 mm • Signal light to indicate operational status • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Marking software EZCAD in German/English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) Itedpfoy T Ixnex Ab Nei • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Monitor and keyboard support with adjustable height • Aluminum profile frame • Air cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 100 kg, bendras ilgis: 800 mm, bendras plotis: 600 mm, bendras aukštis: 1 660 mm, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, lazeri tipas: šviesolaidinis lazeris, The universally deployable laser marking system LAS 28 by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming knowledge. The software can automatically sequence serial and part numbers after prior configuration. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options such as side outriggers for marking long parts are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic determination of focal distance • Signal tower to indicate operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) Iodev Sybyepfx Ab Noti • Focus finder (simple focus adjustment) • Maximum component height approx. 270mm • Electrically adjustable Z-axis (working plane adjustment) • Aluminum profile frame • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg