Briketavimo presas / briketų presas

mütek Systemtechnik MPP 110

Machine lead time approx. 3.5 months

Very robust machine with high pressing force
- Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible.

Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in use by satisfied customers
+ Good price-performance ratio

Options:

Surcharge for cooling unit + €3,995 net (can also be retrofitted later)
* Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular continuous operation of more than 3.5 hours

Large pre-compaction chamber + €1,975 net
Recommended for light input materials such as planer chips

Customs tariff number: 84793010
Briquette diameter: 65 mm
Front bushing: 65 mm
Max. briquette stroke: 50 mm
Opt. briquette stroke: 50 mm
Performance (material dependent): up to 110 kg/h*
During last test approx. 87 kg/h
*Dependent on bulk density
*Based on a bulk density of 200 kg per cubic meter

Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Nwsdpfx Asffh Atocasi
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 m³
Pump: 37 liters
Hydraulic pre-compactor
Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws
Pressing jaw cooling via water tank (to be provided by customer)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
String briquette option: yes (material dependent)
CE compliant

Requirements for raw material:
- Moisture content (atro) must be at least 6% and a maximum of 18%
- Chip length maximum 15 mm
- Installation temperature: heated area at least +5°C
- Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.