Mütek Systemtechnik Mpp 110 pirkti naudotą (5 861)

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Godpfx Afsffh Atjqekb Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Gjdpfegl Nlmex Afqekb Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Gkedpfxsgfm Ryo Afqsb Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. Gksdpodwktksfx Afqsb A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: Godpfsgmfa Aex Afqekb - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Godpfx Afev Rpxleqjkb Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Gedpfx Aechuvrjfqekb Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Airflow 1850 m³/h / 400 V Gksdpfsrb D Njx Afqsb

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, veikimo valandos: 6 h, Dar viena mašina – iškart prieinama! Labai tvirta mašina su didele spaudimo galia – tinkama gaminti net ir parduodamos kokybės briketus (priklausomai nuo žaliavos). Didelės apimties spaudimo cilindras ir 80 mm briketai tai leidžia. Mūsų perkamiausia briketavimo presų serija: + Patikrinta, paprasta technologija, užtikrinanti itin mažą gedimų tikimybę + 25 metų patirtis, nuolatinis tobulinimas ir žinios + Tūkstančiai naudojamų mašinų patenkintiems klientams + Puikus kainos ir kokybės santykis Gkedpfxsxfwdj Afqjb Papildoma kaina už aušinimo įrenginį: +4 995 € (be PVM), (galima sumontuoti ir vėliau) * Aušina presavimo žnyples ir hidraulinę alyvą (rekomenduojama, jei presas veikia ilgiau nei apie 3,5 valandos be pertraukos) Briketo skersmuo: 80 mm Priekinė įvorė: 125 mm Didžiausias briketo eiga: 100 mm Optimali briketo eiga: 80 mm Našumas (priklauso nuo žaliavos): iki 200 kg/val.* *priklauso nuo birumo tankio *skaičiuota pagal 200 kg/kub.m birumo tankį Variklio galia: 9,2 kW 400 V / 50 Hz / 3 fazės Ilgis: 2095 mm Plotis: 1600 mm Aukštis: 1700 mm Svoris: 1250 kg Alyvos kiekis: 220 l Siloso skersmuo: 1200 mm Siloso talpa: apie 1 m³ Siurblys: 75 l Hidraulinis išankstinis suslėgėjas Presavimo žnyplių aušinimas: taip, su papildoma aušinama presavimo žnyple Hidraulinės alyvos aušinimas: taip Presavimo žnyplių ir hidraulinės alyvos aušinimas su aušinimo įrenginiu (papildoma įranga) Pilnumo lygio kontrolės galimybė: taip Ištisinis briketas: taip (priklauso nuo žaliavos) Galimybė didesniam užpildymo slankikliui: taip, su papildoma įranga Atitinka CE reikalavimus Reikalavimai žaliavai: - Drėgmė turi būti nuo 6 iki maks. 15% - Kūdros ilgis ne didesnis kaip 20 mm - Darbo temperatūra: šildoma aplinka, ne mažiau kaip +5°C - Tiekiama žaliava turi būti be metalo ir mineralinių priemaišų, tokių kaip smėlis, akmenys ir pan. Priešingu atveju gali atsirasti presavimo įrankių pažeidimų ir/ar padidėti nusidėvėjimas.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: Gjdpfxsd Su Hxe Afqskb With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates Godpfx Aschqxxsfqekb + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, Godpfxsd Nm Sij Afqekb 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Gkjdpfjd N Dnhsx Afqjb Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Gamybos metai: 2010, konvejerio juostos ilgis: 900 mm, konvejerio juostos plotis: 1 300 mm, Ilgis: 900 mm Gkedpfxozd T Ias Afqsb Plotis: 1300 mm

Būklė: labai geros būklės (naudotas), Katalogo numeris: 7549 TECHNINĖS CHARAKTERISTIKOS Gkedozty Rtspfx Afqob didžiausias apdorojamo elemento plotis 1100 mm didžiausias apdorojamo elemento aukštis 170 mm 2 agregatai: 1) guminis raižytas volelis kalibravimui 2) guminis volelis + įvadas + metalinis volelis – viršuje: metalinis, slystantis volelis agregatas metalinis, slystantis volelis agregatas su įvadu metalinis, slystantis ištraukiamasis volelis – apačioje: traukiantis diržas pneumatinė diržų osciliacija elektrinis stalviršio pakėlimas 2 posūvio greičio tipai variklis 11 kW su pneumatiniu stabdžiu darbinis slėgis 6–8 bar ištraukiamojo antgalio skersmuo 2 x 150 mm bendri matmenys (ilgis/plotis/aukštis) 1960 x 1700 x 2000 mm svoris apie 2000 kg – pagaminta Vokietijoje – 2 agregatai – neapdaryta – naudota šlifavimo mašina, labai gera būklė Grynasis kainos: 31 900 PLN Grynasis kainos: 7 595 EUR, priklausomai nuo 4,2 EUR kurso (Kainos gali keistis priklausomai nuo didesnių svyravimų)

Būklė: geras (naudotas), Atnaujinta naudota mašina Pagrindinė mašina, kaina nuo 145 000 € (be PVM) * Papildomos funkcijos už papildomą mokestį, žr. toliau Su pilna 1 metų garantija Godpfxo E Dquo Afqskb * dar viena mašina yra iš karto prieinama Techniniai duomenys: Didžiausias našumas iki 1200 kg/val., priklausomai nuo medžiagos (pvz., pjuvenos, kurios sveria 180 kg/m³) Briketų skersmuo 75 mm Įskaitant 2 m presavimo kanalą Pagrindinio variklio galia 45 kW Padavimo sraigtas, varomas varikliu 2 x 2,2 kW Suspaudimo sraigtas 2 x 5,5 kW Pasiskirstymo sraigtas 2,2 kW Hidraulinio siurblio variklis 0,37 kW Bendroji prijungimo galia 65 kW Valdymo pultas su aiškiais tekstiniais pranešimais apie veikimo būsenas ir apkrovos rodiklis pagrindiniam varikliui ir padavimo sraigtams PLC valdiklis Siemens S7/300 su veikimo valandų skaitikliu valdymo spintoje Mašina pažymėta CE ženklu Automatinė mašinos paleidimo / sustabdymo funkcija Matmenys 3100 x 860 x 1800 mm (ilgis x plotis x aukštis) Svoris 4500 kg Papildomos funkcijos už papildomą mokestį: Temperatūros reguliatorius presavimo įrankiams skirtas palaikyti optimalią temperatūrą, kad būtų užtikrinta aukšta briketų kokybė. Temperatūros reguliatorius siurbliui, aušinimo įrenginiui, ventiliatoriui, presostatui Prijungtas, paruoštas naudoti – būtina naudoti įskaitant atitinkamą valdiklį + 3 990 € (be PVM) Atpjovimo įrenginys skirtas briketams atpjauti + 5 750 € (be PVM) Reikia prijungti prie suspausto oro! Silos MAP serijai + 19 970 € (be PVM) - Silosas virš mašinos - Talpa apie 6 m³, tvirta plieninė konstrukcija su maišymo įrenginiu ir lygio davikliu. Transportavimo linija / aušinimo linija (nominali vertė: 5x2 m) kiekvienam 2 metrui – 750 eurų (be PVM) Montavimas / paleidimas (nominali vertė vienai presui – apie 2–3 dienos vietoje) pagal faktines išlaidas, atskirai apskaičiuojant. Taikomi šie tarifai: Serviso technikas / mechatronikas už montavimo ir kelionės valandą: 129,00 € Viršvalandžiai: 25 % priemoka Už kiekvieną šeštadienio ir nakties valandą – 50 % priemoka Už kiekvieną sekmadienio ir šventės valandą – 100 % priemoka Kiekvienam montuotojui – priklausomai nuo šalies Už kiekvieną automobilio ir transporto priemonės nuvažiuotą kilometrą: 0,98 €/km Kelionės išlaidos ir apgyvendinimas apmokami pagal pateiktus čekius arba fiksuoto mokesčio principu užsakovo sąskaita. Bandymas su konkrečia kliento medžiaga: (pagal susitarimą, iki 750 kg) – 1 970 € (be PVM), fiksuota kaina ---- Reikalavimai žaliavai: - Drėgmės kiekis (atro) turi būti ne mažesnis kaip 6 %, bet ne didesnis kaip 18 % - Drožlių ilgis – ne daugiau kaip 20 mm - Aplinkos temperatūra: šildomas patalpas, ne žemesnė nei +5 °C - Žaliavoje negali būti metalo ir mineralinių priemaišų. Pažeidimai presavimo įrankiuose ir (arba) padidėjęs nusidėvėjimas gali būti pasekmė.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact desktop device with a small working area, making it ideal for small parts. Thanks to its minimal footprint, the system is highly practical and can be used anywhere. The device is very easy to operate, even without programming knowledge. With its powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without requiring advanced programming skills. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30 Watt fiber laser (optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - EZCAD marking software in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: fume extraction unit (incl. activated carbon filter) Gkodpfxjzpwlmj Afqeb - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - 230V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 140 kg, bendras ilgis: 900 mm, bendras plotis: 800 mm, bendras aukštis: 2 000 mm, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent markings, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. Gkedpfx Afexuvk Eeqeb Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options such as side extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Signal light for system status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Screen and keyboard tray height adjustable • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Būklė: naujas, Gamybos metai: 2026, Vienašis smulkintuvas MRZ 530 Įskaičiuota: Gkodped Db N Ijfx Afqeb „Eco Ring“ rotorius (sumažintas energijos suvartojimas) Papildomos parinktys: Faneros ir popieriaus valytuvas + 970 € (be PVM) * Rekomenduojama naudoti itin plonoms medžiagoms, kurių storis mažesnis nei 3 mm Mūsų „mütek“ vienašis smulkintuvas MRZ 530 smulkina įvairias medžiagas, tokias kaip visų rūšių atliekos, minkšta mediena, skiedrų ir kietųjų plokščių plokštės, padėklai, statybinė mediena, griovimo atliekos, kiliminė danga, kabeliai, popierius, kartonas ir plastikas. Ši mašina pasižymi tvirta konstrukcija, užtikrinančia nuolatinę kokybę ilgalaikio naudojimo metu. Mielai atliksime nemokamą bandymą jūsų medžiaga. Kviečiame jus atvykti į mūsų įmonę Neckartailfingene. Taip pat galite atsiųsti mums savo medžiagą per transporto įmonę, o mes atliksime bandymą ir jį užfiksuosime nuotraukomis bei vaizdo įrašais. Mašinos duomenys: Variklis: 11 kW; 400 V – 50 Hz – 3 fazės, Peiliai: daug kartų pasukami, Rotoriaus skersmuo: 260 mm, Valdymo sistema: PLC „Siemens S7-1200“, Įleidimo bunkeris (mm): 510 x 810 mm, Bunkerio tūris: apie 0,4 m³, Hidrauliškai valdomas stūmiklis, Sietas (pasirenkama): (10–40 mm), Dulkių nusiurbimo jungtis: Ø 160 mm, Svoris: apie 1000 kg, Matmenys: apie 1550 x 1100 x 1640 mm, Žaliavos drėgmės kiekis: turi būti mažesnis nei 30 % (matuojamas esant 20 °C temperatūrai). Standartinė komplektacija: • Greita hidraulika • Profilinis rotorius • Valdymo spinta su „Siemens“ PLC valdikliu • Automatinis paleidimas žvaigžde/trikampiu • Automatinis išsijungimas, kai rotorius neveikia • Nuimama dulkių surinkimo sistema • Sūkių skaičius 70–100 aps./min., didesniam našumui • Ciklinė valdymo sistema, kad būtų išvengta neproduktyvaus laiko • Hidraulinio stūmiklio našumą didinantis žingsninis valdymas • Stabilūs kreiptuvai hidrauliniam stūmikliui Papildomos smulkintuvo parinktys: – Smulkintuvą pakelti 30 cm (paruošta konvejerio juostai) +1 980 € (be PVM) – Lankstomasis konvejeris +8 770 € (be PVM) Horizontalioji dalis: 1200 mm Pakylanti dalis: 2500 mm Kampas: reguliuojamas nuo 0 iki 60 laipsnių Išleidimo aukštis: apie 2000 mm + - 100 mm – Juostinis magnetas +5 980 € (be PVM) – Konvejerio ir juostinio magneto valdymas +2 750 € (be PVM) (paleidimas ir sustabdymas sinchronizuoti su smulkintuvu) Žaliavos reikalavimai: – Drėgmės kiekis turi būti mažesnis nei 30 % (matuojamas esant 20 °C temperatūrai) – Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir kt., lemia didesnį nusidėvėjimą.

Būklė: geras (naudotas), Techninės paletinės lentynos skersinės sijos charakteristikos: Lentynų sistema: Bito Tipas: PL 38 Į komplektą įeina: 1 vnt. naudota paletinė lentynos skersinė sija Medžiagos spalva: mėlyna Profilio skerspjūvis: 110 x 50 mm Skersinės sijos tipas: PT27.112LN Užsegimas: 3 vnt. (kabliai) Gkedpfxszwvias Afqsb Naudinga plotis: 2700 mm Maksimali apkrova vienai skersinių sijų porai: 3000 kg, esant tolygiai paskirstytam svoriui 2 vnt. naudoti fiksavimo kaiščiai Apmušimas: visiškai cinkuotas Skirta ilginiesiems elementams apsaugoti nuo atsitiktinio ištraukimo Jūsų kontaktiniai asmenys mūsų įmonėje: Pon. Andre Evering Pon. Mario Klöver Pon. Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Papildomi transportavimo arba siuntimo kaštai taikomi, jei pageidaujate, kad prekė būtų pristatyta. Konkrečios išlaidos priklauso nuo pristatymo vietos ir apimties, todėl jas galima sužinoti atskirai.

Būklė: geras (naudotas), Simplacutter modelis IV 110×160 Cauhe išpjaustymo staklės Įrenginys visiškai veikiantis, kaip naujas. Pagamintas Ispanijoje. Rėmo dydis: 1100×1600 mm Lakšto dydis: 1160×1680 mm Svoris: 8500 kg Maitinimas: 380 V Įdiegta galia: 7,5 kW Smūgio jėga: 350 t Įranga: – pneumatinė sankaba ir stabdys – valdymo pultas – du rėmai – 2 darbo režimai: su uždelsimu, rankinis – centrinis tepimas – papildomos saugos užtvaros – apsauginiai slėgio kilimėliai – darbo įrankiai Gsdjzmu I Tspfx Afqekb – kietas metalo lakštas

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, bendras ilgis: 350 mm, bendras plotis: 605 mm, bendras aukštis: 1 080 mm, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 70 mm, nuskaitymo srities plotis: 70 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The mobile LAS 23 portable laser stands out for its compact design. Small, handy, and equipped with custom attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base, it can be moved directly to the workpieces to be marked. This makes it suitable for both large and heavy, as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setup. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Made in Germany • Fiber laser, 20W (optional: 30 Watt, 50 Watt) • Laser Class 1 Gkedpjznr Umefx Afqjb • CE compliant, according to EU directives • Wavelength: 1064nm • Marking area: 70x70mm (optional: 110x110mm) • Signal light to indicate operating status (on the hand unit) • Marking software: EZCAD • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (hand unit): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, bendras ilgis: 600 mm, bendras plotis: 400 mm, bendras aukštis: 690 mm, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Its minimal footprint makes the unit highly practical and universally deployable. The device is very easy to operate, even without programming knowledge. With its powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming skills. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (three-jaw chuck) for marking cylindrical parts. - 20 Watt fiber laser (optional: 30 Watt, 50 Watt) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm Gksdpfxsy Emths Afqeb - EZCAD marking software (German / English) - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - optional: extraction unit (incl. activated carbon filter) - optional: three-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 100 kg, bendras aukštis: 1 660 mm, Gamybos metai: 2026, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, Laser for Product Marking – The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, laser marking has become indispensable for permanent identification. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after presetting. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber Laser 20W (Optional: 30W, 50W) • Wavelength: 1064nm • Marking field size: 150x150mm (Optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Tower signal light to display operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) Godpfxszpwmde Afqjkb • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profiles • 230V power connection • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, bendras ilgis: 350 mm, bendras plotis: 605 mm, bendras aukštis: 1 080 mm, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 70 mm, nuskaitymo srities plotis: 70 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The mobile LAS 23 portable laser stands out for its compact design. Small, handy, and equipped with custom attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base, it can be moved directly to the workpieces to be marked. This makes it suitable for both large and heavy, as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setup. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Gsdpjzxcfkofx Afqokb Made in Germany • Fiber laser, 20W (optional: 30 Watt, 50 Watt) • Laser Class 1 • CE compliant, according to EU directives • Wavelength: 1064nm • Marking area: 70x70mm (optional: 110x110mm) • Signal light to indicate operating status (on the hand unit) • Marking software: EZCAD • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (hand unit): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system