Briketavimo presas Briketavimo presas Aliuminis

mütek MPP NEM 300

* Production time approx. 4–5 months

---
Our best-selling briquetting press series
+ Proven, straightforward technology for extremely low failure rates
+ 25 years of experience, continuous development, and expertise
+ Several hundred machines in use by satisfied customers
+ Excellent price-performance ratio
Tsdpfochqxxox Alwsb

The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%.

The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material.

The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected.

Briquetting offers the following advantages:
• Volume reduction of up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable resale

--

Briquetting Press NEM 300
Throughput capacity approx. up to 200 kg per hour *highly material-dependent

- Last test with aluminum granulate

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.