Medienos smulkintuvas

mütek Systemtechnik MRZ 630

Special price for our demonstration machine
One machine remaining, immediately available (ex works Neckartailfingen)
Approx. 8 operating hours.

Suitable for shredding all types of residual wood as well as pallet offcuts.

Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency.

Lsdedwktkepfx Ah Tohp
A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket.

Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared.

*Discharge conveyor and overband magnet available at additional cost.

+ Powerful 18.5 kW motor,
+ Concave blades,
+ Large high-performance gearbox,
+ Special, load-dependent pusher control,

Customs tariff number: 84659600
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph.
Blades: 15 pieces, reversible multiple times
Option: double blade row + €995 net

Rotor diameter: 260 mm
Control unit: Siemens S7-1200 PLC
Cutting unit opening: 630 x 820 mm
Fill volume approx. 0.6 cubic meters
Hydraulically operated pusher
Screen perforation as required (10 - 30 mm)
Extraction stub Ø 160 mm
Weight approx. 1,300 kg (depending on equipment)
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% absolute dry
.
Supplied as standard:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC control
- Automatic star/delta starting
- Rapid hydraulic system
- Auto stop for rotor idle run
- 70–90 rpm for high throughput performance
- Timed operation to prevent idle times
- Performance-enhancing step control for hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
- MADE IN GERMANY
.
Shredder options:
- Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net

- Inclined discharge conveyor +€8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Adjustable angle: 0–60 degrees
Discharge height: approx. 2000 mm (+/- 100 mm)

- Overband magnet +€5,980 net
- Control unit for conveyor & overband magnet +€2,750 net
(start and stop each synchronized with the shredder)
- Hopper extension +€940 net
- Eco rings: +€1,980 net
(recommended for more than 15% hardwood)
- Special scraper +€990 net
(recommended for veneer or paper)
- Double blade row +€995 net
.
Raw material requirements:
- Moisture content (absolutely dry) must be below 30%
- Metals and mineral impurities such as sand, stones, etc. will increase wear.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.