Ištraukiamasis magnetas Virš juostos esantis magnetas Magneto blokas

die magnetprofis

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminium angled conveyor belt including mobile base frame Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at each bend: 40 degrees Feed height (measured from floor): 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Dusdpfx Afoyt Ia Do Aot Extremely robust aluminium construction, heavy-duty design! PU conveyor belt including flights and corrugated sidewalls Drive: 0.55 kW motor (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, IP54 protection rating Drive and other components ready for connection, motor control unit optional Corrugated edges: 80x50 mm T-60 cleats, short pitch 2-ply, exceptionally cross-stable Corrugated sidewalls, flights, and belt are continuously high-frequency welded In the angled section, the belt is guided on both sides with 4 hold-down rollers each. The belt is manufactured with a 100 mm zone on each side free from sidewalls. Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width: 400 mm, calculated as follows: (Top view) Cross-section arrangement 100+50+400+50+100 mm Demonstration unit - Immediately available! - Can be viewed under power All prices are net prices plus 19% VAT All information subject to change, while stocks last!

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, approx. 4.5 m long feed and centering table Chain-driven from the feed motor Centers the round timber to the rotor axis Debarking machine VK 26 4 main cutters 4 pre-cutters Duedpfx Afju Hmaco Aet 30 kW main motor 11 kW feed unit Non-driven outfeed table Machine workshop-inspected Machine cleaned and newly painted

Gamybos metai: 2025, veikimo valandos: 5 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2025112701, Aluminum Inclined Conveyor with Supporting Frame Including adjustable leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 3,000 mm - Discharge height: 2,000 mm Execution: Aluminum structural design - Triple-reinforced profile 135x45 mm Dujdoydb Rwepfx Af Aet - Full-surface discharge sheet, 2.0 mm galvanized Drive drum and return drum made of S235 steel, welded and machined Ø150 x 620 mm, crowned and precision-turned, shaft secured with pillow block bearings. Drive: Shaft-mounted gear motor, 1.10 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped splice Belt material: 2-ply, specially cross-stabilized 2 pcs. wave edge profiles, 80 mm high, 50 mm wide, edge-aligned and high-frequency welded 18 pcs. T60 cleats, 430 mm long, approx. 508 mm pitch, center-welded Belt material: 2-ply, specially cross-stabilized Due to wave edge profiles on both sides, the usable belt width is reduced: Usable width: 500 mm, as follows: (Top view) Cross arrangement 50+500+50 mm

Būklė: naujas, Gamybos metai: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Wave Edge Profiles) We offer a robust incline conveyor constructed from aluminum profiles for reliable transport of unit and bulk materials—ideal for industrial, manufacturing, recycling, woodworking, and more. Cleats and wave edge profiles ensure secure material handling even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Feed height: individually adjustable ✔ Incline section: custom lengths available ✔ Discharge height: individually adjustable ✔ Substructure includes leveling and machine feet, or transport castors → for easy leveling on uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum frame construction Dujdpfeyhzplox Af Ast ✔ Twin profile 90x45mm or reinforced triple profile 135×45mm ✔ Full-surface discharge plate 2.0 mm galvanized or 1.4301 stainless steel _____ Rollers / Drive: ✔ Drive and return rollers made from S235 steel, welded and machined ✔ Ø100, 150 or 220mm ✔ Shafts mounted with pillow block bearings ✔ Drive: Shaft-mounted gear motor 0.18 – 3.0kW ✔ Belt speed: individually adjustable ✔ Power connection 230/400V, 50Hz, protection class IP54 (standard) ✔ Drive pre-wired to motor terminal box ➡️ Commissioning must be performed by qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt width: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply versions with high cross-stability ✔ Wave edges: up to 80mm high ✔ Cleats: individually customizable ✔ Pitch customizable as required _____ Optional Accessories: ✔ Infeed plates ✔ Hopper / infeed hopper ✔ Storage bunker / loading bunker ✔ Discharge hopper ✔ Custom lengths / widths ✔ Cleats & wave edges to specification _____ ✔ Custom fabrication to customer specifications ✔ Industrial quality "Made in Germany" Dimensions, configuration & pricing upon request Just send us a short message – we provide fast and straightforward advice. Discover tailor-made solutions for your industry! As an innovative engineering company, we are proud to offer custom solutions for the recycling, food processing, and related industries. Our extensive product portfolio covers everything from conveyor systems, flat conveyors, incline conveyors, and angle conveyors to Z-conveyors. We also produce feed hoppers, magnetic separators, overband magnets, drum magnet separators, and dosing bunkers—each tailored to the specific requirements of our clients. We understand that every sector and project is unique. That’s why we adapt our solutions individually to your needs and requirements. Complex projects represent an exciting challenge, and we look forward to developing innovative solutions together with you. For us, there are no special orders—there is a fitting solution for every challenge! Put us to the test! Contact us and discover how we can turn your requirements into bespoke solutions. Let’s shape the future of your production processes together!

Būklė: geras (naudotas), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Duodpsv Sz Tdefx Af Aot Control system: Siemens S7 Upgraded to latest standards with spare parts support in 2015 Supported bag types: quicklime, hydrated lime, cement, gypsum

Gamybos metai: 2026, būklė: naujas, Robust steel construction – designed for continuous operation The basic structure consists of a sturdy structural steel frame, manufactured from laser-cut, folded, and welded components. The surface features a high-quality powder coating in RAL0208. Modular design: Our conveyor belt frames are available as transportable segments. This makes the system: • Easy to transport and assemble • Extendable or shortened at any time • Ideally suited for future modifications or plant adaptations Djdpfx Aeyhznnsf Aout Conveyor technology & carrier rollers The carrier roller assembly in the lower frame is designed for smooth and reliable operation: • Axle diameter: 60/15 mm • Roller station spacing: approx. 500 mm (can be customized) • Infeed area with optional closer roller spacing for increased load capacity Drive & rollers The drive roller and return roller are made from S235 steel, welded and precisely machined: • Diameter 220 × 700 mm, crowned finish • Shaft fixed with plummer block bearings • Bearing points with robust UCF flange bearings incl. grease nipples Drive unit: • Hydromec worm geared motor 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive ready for connection up to motor terminal box • (Commissioning must be performed by a qualified electrician) • Motor mounted on right side in conveying direction, pull installation Conveyor belt A durable, industrial grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Splice area without profile • Endless hot vulcanized Individual options & accessories (as required) Thanks to the modular design, all components can be precisely configured to your process, for example: ✅ Special lengths & widths ✅ Side panels / corrugated edges (for lateral guidance and greater conveying stability) ✅ Infeed plates / loading plates (wear-optimized, gentle on material) ✅ Loading/reception hoppers (for clean feeding of bulk materials) ✅ Discharge plates / chutes ✅ Cleated profiles / alternative belt qualities ✅ Adjustable roller spacing & carrier roller geometry ✅ Special paintwork / customer-specific execution

Gamybos metai: 2026, būklė: naujas, DM Flat Conveyor Belt Type FB-700 without substructure for conveying bulk materials Conveyor belt length: 6,000 mm Belt width: 650 mm Construction made of structural steel, laser-cut, bent, and welded Base structure powder-coated RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame construction can be extended or shortened at any time. Carrier roller system in the lower run, axle Ø60/15 mm Roller station spacing approx. 500 mm (customizable) Dodpfx Aeyhznhsf Aeut Closer roller spacing in loading area Drive roller + return roller made of S235 steel, welded and machined Ø220x700 mm crowned, shaft mounted with tension bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) Motor mounted on the right in conveying direction, installed in pull configuration. Bearing locations fitted with robust UCF flange bearings including grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile 17 mm high x 650 mm wide Joint area without profile, hot vulcanized endless splice

Būklė: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Dujdpfx Aocqvhwef Aet Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2026, Aluminum-angle conveyor belt with supporting frame including adjustable feet and machine leveling feet to compensate for uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Bend angle: 45° Height of horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Construction: Aluminum structural design - Double reinforced profile 90x45 mm - Full-surface 2.0 mm zinc-plated discharge plate Drive roller and return roller made of S235 steel, welded and machined Diameter 100x620 mm, crowned and precision-turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted geared motor 1.10 kW, belt speed: 0.53 m/sec Connection 230/400V, 50Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including PU wavy edge, petrol matt Belt width: 600 mm 2 pcs. corrugated edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on each side by 3 hold-down rollers. The belt features a 70 mm edge-free zone on both sides. Due to the double wave edge, the usable belt width is reduced: Usable width: 300 mm, determined as follows: (Top view) transverse arrangement 70+25+5+400+5+25+70 mm Dodpfxsyhzhzo Af Ajut Special features: Belt guidance via PVC V-guide profile – 10x6 mm on the running surface - Incl. widened base frame for improved stability (top-heaviness) - Incl. cutout in the discharge plate - Incl. wear strips in drive and return roller - Incl. non-magnetic zone for over-belt magnetic separator - Incl. bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveying systems, flat belt conveyors, inclined conveyors, and angle conveyors up to Z-conveyors. We also manufacture feeding hoppers, magnetic separators, over-belt magnet separators, drum magnet separators, and dosing bunkers – all built to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we adapt our solutions individually to your needs and specifications. Complex projects represent an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there are no special configurations – for every problem, we find the right solution! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, over-belt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, over-belt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnet, metal separator, block magnet, filter systems, dosing bunker, feed hopper, filling systems

Būklė: naujas, Gamybos metai: 2026, Aluminum Angled Conveyor Belt with Substructure Including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Bend angle: 45° Total conveyor belt length (measured on the ground): 5,000 mm Discharge height: 2,000 mm Height of the horizontal section: 500 mm Design features: - Aluminum modular construction - Reinforced triple profile 135x45 mm - Continuous 2.0 mm galvanized steel cover plate Drive roller and return roller: S235 steel, welded and machined Ø150 x 820 mm cambered, shaft fixed with bearing units. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive delivered ready for connection up to the motor terminal box Dodpeyhzhujfx Af Asut (Commissioning must be carried out by a qualified electrician) PVC Conveyor Belt DM 15/4 0+007 PVC including wave edge profiles, green Belt width: 800 mm 2 wave edge profiles (80 mm high, 50 mm wide), high-frequency welded 32 T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt is designed with a 70 mm edge-free zone on both sides. Due to the wave edge profiles on both sides, the effective belt width is reduced: Usable width: 490 mm, composed as follows: (Top view) Crosswise layout: 100+50+5+490+5+50+100 mm Discover custom solutions tailored to your industry! As an innovative mechanical engineering company, we take pride in offering custom solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all tailored to our customers’ specific requirements. We understand that every industry and every project is unique. That’s why we customize our solutions individually to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. For us, there is no such thing as a special order—we find the right solution for every challenge! Challenge us! Contact us to discover how we can turn your requirements into made-to-measure solutions. Together, let’s shape the future of your production processes! Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, conveyor belt magnet separator, lifting magnets, filter rods, magnetic grid, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, X-axis travel: 185 mm Z-axis travel: 360 mm B-axis travel: 460 mm Control: Mazatrol 640 T Max. swing diameter: 550 mm Max. turning diameter: 280 mm Max. workpiece weight: 200 kg Bar capacity: 51 mm Main spindle speed: 35–6000 rpm Milling spindle speed range: 25–4500 rpm Rapid traverse in X and Z axes: 30/33 m/min Rapid traverse B axis: 30 m/min Tool turret: 12 stations Machine weight: approx. 4100 kg Capacity: Chuck size: 6 inch Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar diameter: 51 mm Distance between spindle nose and turret face: 80–535 mm Duedjyukf Sspfx Af Aet Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Sub spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pcs Tool sizes: - External turning tool: 20 mm - Internal turning tool: 32 mm - Milling drill: 16 mm - Thread milling cutter: M12 - End mill: 16 mm Milling spindle speed: 25–4500 rpm Equipment / Accessories: Tool holders Cutting tools Driven tools Turning tool holders Coolant system Chip conveyor Documentation

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Aluminum Z-shaped conveyor belt with supporting structure Including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor belt length (measured on the floor): 3,500 mm Height of horizontal section: 400 mm Design: Aluminum construction - Double-reinforced profile 90x45 mm - Full-surface discharge sheet, 2.0 mm galvanized Drive and deflection drum: S235 steel, welded and machined Ø100x720 mm, crowned, shaft mounted with pillow block bearings Drive: Mounted geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS extra cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spaced approx. 299 mm apart Belt material: 2-ply, especially cross-stable At the bends, the belt is guided on both sides by 3 hold-down rollers each. The belt is manufactured with a 70 mm border-free zone on both sides. Due to the wave edges on both sides, the usable width of the conveyor belt is reduced: Usable width: 500 mm, calculated as follows: (top view) transverse configuration 70+25+5+500+5+25+70 mm Duedpfxoyhzhns Af Ast Belt guidance via PVC V-guide on running surface profile - 10x6 mm - Including recess in the discharge sheet - Including sliding bushes in the drive and deflection drums

Būklė: naujas, Gamybos metai: 2026, Aluminum incline conveyor with substructure including adjustable feet and machine leveling feet for compensation of uneven surfaces - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum construction - Triple-reinforced profile 135x45 mm - Full-area discharge plate 2.0 mm galvanized Drive drum + return drum S235 steel, welded and machined Ø150x620 mm, crowned, shaft mounted with pillow block bearings. Drive: Shaft-mounted geared motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless, high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, high-frequency welded flush to belt edges 14 pcs. T60 cleats, 400 mm long, spacing approx. 296 mm, centrally welded Belt material: 2-ply, especially cross-stable Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width 500 mm, as follows: (top view) Transversal arrangement 50+500+50 mm Dusdpoyhzhbsfx Af Aet

Būklė: geras (naudotas), Pramoniniai robotai Gamintojas: Kuka Tipas: KR6, KR6-2, KR6arc Tipas: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Visi tipai su KRC2ed05 valdikliu Djdpfx Aotuc U Rjf Ajut Kuka KR6 KRC2ed05 gamybos metai 2006 Kuka KR6-2 KRC2ed05 gamybos metai 2011 Kuka KR6arc KRC2ed05 gamybos metai 2006-2007 = keli egzemplioriai sandėlyje Kuka KR16L6 KRC2ed05 gamybos metai 2009 Kuka KR16L6-2 KRC2ed05 gamybos metai 2011 Kuka KR16 KRC2ed05 gamybos metai 2007-2009 = keli egzemplioriai sandėlyje Kuka KR16-2 KRC2ed05 gamybos metai 2010-2012 = keli egzemplioriai sandėlyje Kuka KR16-2 Speed KRC2ed05 gamybos metai 2012 = keli egzemplioriai sandėlyje Kuka KR16-2 Foundry KRC2ed05 gamybos metai 2012

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, ŠI KAINŲ AKCIJA GALIOJA TIK 2025 M. RUGSĖJĮ Nuolatinis virškonvejerinis magnetinis separatorius TIPAS PEM1200 1200 x 550 x 200 mm ===== 4 žiediniai varžtai pakabinimui Vairuojantis ir grąžinimo būgnas iš S235 plieno, suvirintas ir apdorotas Ø150x300 mm, išgaubtas ir nušlifuotas, velenas užfiksuotas guolių lizdais. Dviejų skylių flanšiniai guoliai UCFL su tepimo nipeliu, sandarus guolio korpusas Pavara: užmaunamas reduktorinis variklis GEMOTEG 0,18 kW, greitis 0,4 m/s Jungtis 400V, 50Hz, apsaugos klasė IP54 Pavara paruošta prijungimui iki variklio gnybtų dėžutės (Montavimą turi atlikti kvalifikuotas elektrikas) Juodas matinio paviršiaus bekraštis PU transportavimo diržas GB30 7 T20 barjerai, aukštadažniai suvirinti Dujded Dy Ugopfx Af Ajt Aukštos kokybės trigubos aliuminio konstrukcijos 2 šoninės apsaugos plokštės iš V4A nerūdijančio plieno Magneto matmenys: 700x230x120 mm Magnetinis šerdis įdėta į minkštą geležį, kad būtų užtikrintas itin didelis pralaidumas. Apatinė dalis sandariai uždaryta ir užsandarinta nerūdijančio plieno plokšte ir poliais.