Briketavimo presas

mütek MPP 180

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Psdpfovqbh Eox Af Nogg

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pedpfx Ashw Ng Iof Negg Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naudotas, Weinig Powermat 500 obliavimas ir profiliavimo automatas, skirtas keturpusiam medienos obliavimui ir profiliavimui su CNC valdymu ir Powerlock greito keitimo sistema. Velenai: 7 Velenas 1: Apačioje / 7,5 kW / 8 000 aps./min Velenas 2: Dešinėje / 7,5 kW / 8 000 aps./min Velenas 3: Kairėje / 7,5 kW / 8 000 aps./min Velenas 4: Dešinėje / 7,5 kW / 8 000 aps./min Velenas 5: Viršuje / 7,5 kW / 8 000 aps./min Velenas 6: Viršuje / 7,5 kW / 8 000 aps./min Velenas 7: Apačioje / 7,5 kW / 8 000 aps./min Darbo plotis: 260 mm Darbo aukštis: 160 mm Padvimas: 30 m/min / 4 kW Pgsdpfxoxzdwyj Af Njg Obliavimo stalo ilgis: 2 500 mm Oro pagalvės stalas: Taip Valdymas: PowerCom Plus

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 Pedpfx Aju D Amgef Negg • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: geras (naudotas), Gamybos metai: 1999, Briketavimo presas GP 120 Tandem tipas. Presas skirtas pjuvenoms, drožlėms ir dulkėms briketuoti, su automatiniu lygio jutikliu. - Briketo diametras: 60 mm Podpfeupwx Hex Af Nsgg - Presavimo našumas: 40 - 120 kg/h * 2 = 80 - 240 kg/h (priklausomai nuo medžiagos) - Piltuvo atidarymo dydis: apie 1.900 x 1.900 mm - Piltuvo aukštis: apie 1.800 mm - Piltuvo talpa: apie 6,0 m³ - Variklio galia: 7,5 kW, 400 V, 50 Hz - Valdymo spinta: iš abiejų pusių - Darbo valandos: 13.725 val. arba 13.005 val. - Hidraulinis agregatas: apie 300 l hidraulinio aliejaus bakas - Svoris: apie 1.100 kg * 2 = 2.200 kg Naudotas briketavimo presas, geros būklės. W-znyplių cilindras, replės (RB 120 sustiprintos), replės jungties flanšas viena kryptimi pakeistas (kairėje, transportavimo kryptimi) briketavimas | briketavimo presas | briketavimo presai | briketų presas | briketavimas

Gamybos metai: 2001, veikimo valandos: 123 h, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Pedpfeftdv Ujx Af Negg

Sąlyga: naujas, Gamybos metai: 2026, Drum Chipper Series ATH 300 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, wood mills). Chippers of the "ATH" series produce high-quality and homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy production. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs Pjdouz Hmxopfx Af Negg - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 70 stacked cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Infeed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, and material feed Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Versatile application - Custom manufacturing Need further information? Contact us! We’ll be happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition Pgedpjrigxysfx Af Nog

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Max. working size (mm): 400x300mm Distance from saw blade to worktable (mm): 3~200mm Conveyor belt width (mm): 385mm Saw wheel motor power (kW): 18.5kW Saw assembly gear wheel diameter (mm): 711mm Feed speed (m/min): 0~12m/min Hydraulic pressure (kg/cm²): 55kg/cm² Pgjdpfx Asi Ay Hqjf Njg Dust extraction port diameter: 102mm x 2 Saw blade size (L x W x H) (mm): 4572x27x0.9mm Saw kerf (mm): 1.5~1.8 mm Overall dimensions (L x W x H) (mm): 3000x2250x2000 Net weight (kg): 2100kg

Sąlyga: naujas, Gamybos metai: 2024, Boring and Inserting Machines Rilesa Vlg 2200, new, March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Startup Type: to be agreed Psdpfxsgbpmho Af Nsgg Shipping Cost: Buyer Protection Delivery Terms: EXW (EX WORKS) – COLLECTION BY BUYER Category: Machine Tool Accessories in Poland Subcategory: Drill Bits Subcategory 2: Drilling Machines Description: DRILLING MACHINE WITH AN 8-SPINDLE MAGAZINE, TWO FRONT RIGHT AND LEFT, 3 TOP, AND 3 REAR. Year: 2024 The machine can be equipped with additional drilling heads; we are also a manufacturer of heads available in various spacings and with varying numbers of drilling spindles, tailored to individual requirements.