Mütek Mpp 180 pirkti naudotą (6 401)

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Hodpfed Nm Siex Abvsfg Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit Hodpfjgfm Rysx Abvofg

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm Hsdpfxjgl Nlms Abvofg - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Hfsdpod N Dnhefx Abveg Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Hjdpfxsd Su Hxj Abvofg Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Hfedpfxjffh Ats Abvjg Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, * Vaizdo įrašas yra tik pavyzdys, kaip galima paruošti šią ląstelę Ląstelė su šlifavimo robotu Kuka KR 180 Šlifavimo ląstelė Berger 2012 (išorinis šlifavimas A1) - Bendras svoris apie 6300 kg - Ląstelės matmenys: apie 4650 x 2400 x 3100 mm 6 ašių robotas Kuka KR 180 R2500 Extra - Pagaminimo metai 2011 - Valdymas KRC 4 - Papildoma ašis (7 ašis) Juostinio šlifavimo stotis BSS10 - Maks. juostos matmenys 3500 x 30 mm - Maks. kontaktinio disko skersmuo 200 mm - Variklio galia 4 kW 2 x poliravimo stotys - Poliravimo disko diametras 350 - 600 mm - Galia 5,5 kW Griebtuvų keitimo spinta Juostinis konvejeris Interoll Automation GmbH - Bendra ilgis apie 2000 mm - Juostos plotis apie 440 mm Hfsdpfjg Saqvex Abvjg Į kainą įeina visas koncepcijos sprendimas, kaip parodyta vaizdo įraše Turime 4 tokias ląsteles. Galima pagaminti bet kurią detalę, kaip matote vaizdo įraše.

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Chain width: 400 mm - Roller width: 370 mm - Roller diameter: 60 mm - Maximum saw blade diameter: 300 mm - Saw blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From the top: - Pneumatic hold-down - Pawls - Metal pressure roller, 2 pcs - Pawls - Roller with saw blades - Smooth pressure roller Hedpfjyr Rmqox Abvsfg - Pawls - Smooth pressure roller From below: - Driven metal toothed roller, 2 pcs - Pawls - Chain conveyor - Roller with saw blades - Chain conveyor - Stepless feed speed adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic lifting of the upper body - Hydraulic adjustment of rollers with saw blades - Pump motor: 0.37 kW - Central lubrication - Extraction port diameter: 1 x 300 mm, 1 x 380 mm - Dimensions (LxWxH): 3200 x 2350 x 2000 mm - Weight: approx. 5500 kg ADVANTAGES – Made in Italy – Double-shaft – Used multi-blade saw, in very good condition Net price: 238,900 PLN Net price: 56,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Būklė: labai geros būklės (naudotas), Katalogo numeris: 7649 TECHNINIAI DUOMENYS Įleidimo plotis: 900 mm Įleidimo aukštis: 300 mm Veleno plotis: 1030 mm Veleno skersmuo: 700 mm Hodpfx Abex S Nawovsfg Peilio ilgis: 1030 mm Peilių kiekis: 3 vnt Sieto matmenys: 70x70 mm Apačioje – 2 dantyti traukos velenai Apatinio veleno variklis: 7,5 kW Viršuje – 2 dantyti traukos velenai Viršutinio veleno variklis: 7,5 kW Juostinis padaviklis Redlerio transporteris su grandinine juosta 5600 mm + 10600 mm, 2,2 kW Padavimo juostos plotis: 800 mm Pagrindinis variklis: 90 kW Atbulinė eiga Bendri mašinos matmenys ilgis/plotis/aukštis: 3300x3100x1700 mm Bazinės dalies matmenys kapotuvui: 3300x2080x1940 mm Padaviklio/redlerio matmenys ilgis/plotis/aukštis: 5600x900x1000 mm + 10600x1050x1600 mm Bazinės dalies matmenys padavimo juostai: 5100x1300x2520 mm Bendras svoris apie: 16000 kg PRIVALUMAI – Pagaminta Vokietijoje – Grandininis redlerio transporteris su gremžtukais – Atbulinė eiga – DTR techninė dokumentacija – Naudota smulkintuvo būklė labai gera Grynasis kaina: 219900 PLN Grynasis kaina: 52350 EUR pagal 4,2 EUR kursą (Kainos gali kisti priklausomai nuo valiutos svyravimų)

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for re-shredding wood chips. Further details can be provided after testing with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for diverse shredding tasks across various applications. For example, defective parts and sprues arising at injection moulding machines need to be reprocessed. In blow moulding operations, besides rejects, there are also waste pieces or startup hoses. Materials that can be processed include, among others, blow moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the cutting chamber of the granulator. The rotor inside is equipped with cutting knives. The material is shredded between the rotating blades and the stationary knives until it reaches a defined granulate size and passes through the screen beneath the rotor. *Optionally, the processed material can then be conveyed pneumatically to Big Bags, silos, or other containers. The price applies only to the granulator system as shown in Image 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput: up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Size reduction of PE 1000 plastic Input material: approx. 40 mm chip length Final granulate size: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ For G 30 wood chip re-shredding, significantly higher throughputs are possible – up to max. 400 kg/h with a 10 mm screen. *Metered feed, e.g. via conveyor belt or auger. Details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Exhaust connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available Price per screen: €390 Price for spare knife set: €679 Hfsdpfx Aed N Dn Debvsg Suitable for, e.g.: - All types of plastic waste Materials such as HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optionally with matching extraction/transport system --- The following information is required for machine configuration: - Length x Width x Height of input material? - Screen size required (to what granulate size)? - Desired hourly throughput in kg? - Wall thickness in mm? - Material description Photos may also be helpful.

Būklė: visiškai atnaujintas (naudotas), baterijos talpa: 930 Ah, akumuliatoriaus įtampa: 80 V, bendras aukštis: 784 mm, bendras ilgis: 1 028 mm, bendras plotis: 1 000 mm, Tested forklift battery for your forklift – 80V 6PZS 930Ah – DIN A Hjdpfey Rnpzjx Abvsfg + 1 year warranty + Includes Aquamatik watering system + Includes end discharge device & REMA 320 connector (other connectors available on request) + Capacity: min. 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,028 mm Width: 1,000 mm Height: 784 mm Weight: approx. 2,240 kg Suitable for the following models and others: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 – side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 – side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 – side battery change Linde P 250 LWB - 5007-10 – vertical battery change Linde P 350 - 5007-10 – side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Common battery sizes available on request. Transport possible.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, In this offer, you are purchasing a used color production system "Xerox Versant 180 Press" Scope of delivery: 1 x Xerox Versant 180 with the following configuration: Hedpfx Abeu Ra Smjvsfg - Fiery Server EX180 included - Paper Deck A-CF03 included - Booklet Finisher A-FN13 included Not the configuration you’re looking for? No problem – the machine can be configured according to your individual requirements. Please feel free to contact us! Meter readings: - Total: approx. 4,419,328 pages - Color: approx. 3,524,210 pages - Black: approx. 895,118 pages Condition: This offer refers to a used device, which may show signs of use (such as minor scratches or yellowing). The device has been functionally tested. A sample printout can be seen in the photos. Packaging and shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance. Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video prior to dispatch or collection. For further information, please do not hesitate to contact us directly.

Būklė: beveik kaip naujas (naudotas), Apskritai suremontuotas įrenginys Kaina: 4 000 EUR Tešlos maišyklė Gamintojas: Diosna Su mentele Nerūdijančio plieno dubuo Tūris: 180 litrų Matmenys: 90x95x135 cm Elektros galia: 3,5 kW Įtampa: 380 V 50 Hz Hsdpox N Egbefx Abvefg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, In this offer, you are purchasing a pre-owned color production system “Xerox Versant 180 Press” Scope of Delivery: 1 x Xerox Versant 180 Press with the following configuration: - incl. FreeFlow Server or Fiery Server - incl. Paper Deck A-CF03 - incl. Booklet Finisher A-FN13 - incl. SquareFold Unit SQF-104 Not the configuration you need? No problem, we can configure the machine according to your requirements. Please feel free to contact us! Meter Readings: - Total: approx. 267,310 pages - Color: approx. 253,808 pages - Black & White: approx. 13,502 pages Condition: This is a pre-owned device which may show signs of usage (minor scratches or yellowing). Hfsdexnlbmjpfx Abveg The device has been function-tested. A test print can be seen in the photo. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Prior to shipping or collection, we will provide you with a video documenting a function test. For further information, please feel free to contact us directly.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, In this offer, you are purchasing a used color production system "Xerox Versant 180 Press" Scope of delivery: 1 x Xerox Versant 180 with the following configuration: - incl. Fiery Server EX180 - incl. Paper Deck A-CF03 - incl. Booklet Finisher - incl. Squarefold + Face Trimmer Hedpfx Abovtpnlsvefg Not the right configuration for you? No problem—it's possible to configure the machine according to your requirements. Please contact us! Meter readings: - Total: approx. 2,573,792 pages - Color: approx. 2,368,409 pages - Black: approx. 205,383 pages Condition: This offer is for a used device, which may show signs of wear such as minor scratches or yellowing. - The device has been function-tested - A test print can be seen in the photo Packaging and shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment for this! Sea-worthy packaging and worldwide shipping are available on request! Before shipping or collection, a function test video will be created for you. For further information, please feel free to contact us personally.

Būklė: naujas, Gamybos metai: 2026, Production time approx. +/- 4 months The optimal machine for shredding, e.g., pallets and wood residues. * Prepared for extraction, see pictures 4 and 5 without additional accessories such as display hopper or conveyor belt cut-out Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph with turbo coupling included Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knives: 76 pieces, reversible multiple times Knife dimensions: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - V-rotor for maximum throughput - 2nd knife row on rotor - Control cabinet with Siemens PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear Hjdpfxed Hkqhs Abvefg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Hodpedwktkjfx Abvofg Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Hfjdpfxed Nnwlj Abveg Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths Hfsdpfjtqfhxox Abvjg The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Installation example 1: Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade protrusion, suitable for both hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Dependent on screen size and material. Significantly higher throughput with smaller wood waste. Motor: 22 kW; 400 V – 50 Hz – 3 ph, Screen: 15/20 mm or as agreed (options from 10 to 40 mm) Hsdpfx Abox Af Rdevofg Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction connection Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg. Standard features included: - Control cabinet with PLC control system - Automatic star/delta starter - High-speed hydraulics - Automatic stop when rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor belt preparation) + €2,480 net - Angle conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with shredder) - Enlarged feed hopper 1500x1500 mm + €3,480 net Requirements for raw materials: - Moisture content (atro) must be below 25% - Feed material must be free of metals and mineral contaminants. Damage to tools and/or increased wear may result otherwise.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine available at special price Hedofci D Aepfx Abvofg Machine available immediately (ex works Neckartailfingen) Demonstration model Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine Including control cabinet with timer operation The press is started manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Output capacity up to max. 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content below 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor 3 kW instead of 2.2 kW, Surcharge + €690 net (Delivery time approx. 8 weeks) ---

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Hfjdsd H R Sxepfx Abvsg Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required

Gamybos metai: 2026, būklė: naujas, *The offer is only for the neodymium overband magnet, not the underlying conveyor belt. *Neodymium magnets are among the strongest magnets in the world. They have extreme holding force and should not be compared with ferrite magnets. Extremely high separation efficiency, depending on material layer height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Control unit not included Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm *Nails are attracted and discharged to the side along a length of 600 mm, outside the magnetic field. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer, depending on the maximum length of metal parts. Ideal for separating nails from wood chips. Optionally usable in a single-shaft shredder with extraction. Requirements: *Your belt width, or effective internal width (of the existing conveyor belt), should ideally be less than 55 cm. *Suitable for separating nails from material streams with a height less than 12 mm, and chip lengths smaller than 25 mm. Hfjdpedubpuefx Abvsg ----- Optional at extra charge: Cross and incline belt demonstration units from €8,770 net.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. Hedechuvrjpfx Abvofg * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. Hfsdpfxjgbkkro Abveg --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.