Konsolinis Stovas Nežinoma pirkti naudotą (2 046)

Būklė: naudotas, Spalva: Pilka Tuščias svoris: 4.350 kg Ilgis: 552 cm - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Lentynos tipas: Keletas - Stovų kiekis [vnt.]: 26 - Sijų kiekis [vnt.]: 87 - Bendra apkrova vienam stovui [kg]: 3000 - Apkrova vienai svirtiai [kg]: 1000 - Svirties ilgis [mm]: 1220 - Stovo aukštis [mm]: 5520 - Pado ilgis [mm]: 1220 - Atstumas tarp stovų [mm]: 1500 - Transportavimo svoris [kg]: 4350 kg Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainais galimi bet kada visiems pramonės sektoriaus produktams Tess van den Boom Iaedpfxsza Ubzs Alrou

Būklė: naudotas, Spalva: Pilka Svoris be krovinio: 1.650 kg Ilgis: 402 cm - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Stelažo tipas: Dvigubas - Statramių skaičius [vnt.]: 11 - Sijų skaičius [vnt.]: 44 - Bendras keliamoji galia vienam statramiui [kg]: 4.000 - Keliamoji galia vienai svirčiai [kg]: 1.000 - Svirties ilgis [mm]: 1.220 - Statramio aukštis [mm]: 4.020 - Pado ilgis [mm]: 1.220 - Atstumas tarp statramių [mm]: 1.500 - Transportavimo svoris [kg]: 1.650 kg Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM gali būti atskaičiuojamas verslo subjektams Pristatymas ir atpirkimas galimi bet kada visiems pramonės sektoriaus gaminiams. Iaodpoza Ubusfx Alrju Tess van den Boom

Būklė: naudotas, Spalva: Pilka Tuščias svoris: 1 650 kg Ilgis: 552 cm - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Lentynos tipas: Dvigubas - Stulpų skaičius [vnt.]: 11 - Sijų skaičius [vnt.]: 66 - Bendra laikomoji galia vienam stulpui [kg]: 6000 - Laikomoji galia vienai rankai [kg]: 1000 - Rankenos ilgis [mm]: 1220 - Stulpo aukštis [mm]: 5520 - Pado ilgis [mm]: 1220 - Plotis tarp stulpų [mm]: 1500 - Transportavimo svoris [kg]: 1650kg Finansinė informacija PVM: Nurodyta kaina be PVM PVM/apmokestinimas pagal skirtumą: PVM atskaitomas verslo subjektams Pristatymas ir įsigijimas pagal mainus galimi bet kada visiems pramonės sektoriaus gaminiams Tess van den Boom Iedpoza Tc Dsfx Alrjau

Būklė: naudotas, Spalva: Pilka Iaedewub H Ijpfx Alrsu - Dokumentacija prieinama: Ne - CE sertifikatas yra: Ne - Stovų skaičius [vnt.]: 15 - Sijų skaičius [vnt.]: 16 - Svirties ilgis [mm]: 1200 - Stovo aukštis [mm]: 3950 - Pado ilgis [mm]: 1500 - Plotis tarp stovų [mm]: 1300 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas į dalinį apmokėjimą galimi bet kada visoms pramonės prekėms Tess van den Boom

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 2.60 m height, 1 m arms, 600 kg per arm, hot-dip galvanized – new: Price: €1,485 (net) Transport within Germany (excluding islands): €430 (net) Of course, you can also create longer or shorter racking units by omitting or purchasing additional frames (or by selecting different column spacings); this example with 4 uprights is just the most common racking solution! Hot-dip galvanized cantilever racking system, consisting of: German brand manufacturer, new Description: - Upright, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 1,000 mm Ijdpfx Aled Epfvjroau - Each with 3 height-adjustable cantilever arms - Load capacity at a load center of 500 mm - 600 kg per arm / 1,800 kg per upright With 4 uprights per arm level: 4 x 600 kg = 2,400 kg Profiles: Frames (uprights): IPE 140, arms: IPE 80 With longitudinal and diagonal bracing, e = 1,300 mm. Standard is 1.3 m – if you do not specify otherwise, we will supply the rack with a 1.3 m column spacing. Other spacings possible: e.g. 1 m, 1.25 m; for a small extra charge, also 1.5 m or custom sizes! As standard delivery, a rack row with 4 uprights is approximately 4,000 mm long. Delivery includes all bolts and nuts, without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever Rack, Single-Sided, 6.30m Height, 1.20m Arms, 500kg per Arm – New Equipment - : Price ex location, including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can construct longer or shorter rack units (or by using different bay widths); this example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - Single-sided upright approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - For 4 uprights per arm level: 4 x 500kg = 2,000 kg - Profiles: frame: IPE220, arms: IPE 80 - With longitudinal and diagonal bracing, e = 1,300 mm; standard is 1.30 m - Other standard bay widths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For bay widths of 1.50 m and above, a small surcharge applies to the stated price! - Custom dimensions (other bay widths) are also available on request, but also incur a surcharge and have a longer delivery time as they must be custom-manufactured! - If you do not specify a different bay width, the rack will be delivered with a standard bay width of 1.30 m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Supplied with all bolts and nuts (shipped within Germany via parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Ijdpfxjfivg Rs Alreau

Būklė: naujas, Gamybos metai: 2025, Cantilever rack for light loads, single-sided, frame height 2m, rack length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – new: Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport costs on request! Manufacturer: Bruckamp Year of manufacture: New Model: Super Leicht Set includes: 4 uprights with 5 arms each / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust design – manufactured from IPE 100 Fixed welded arms at approx. 330mm intervals. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Includes floor anchors Includes load capacity signage Iedpfsxbz Ddjx Alroau Description: 4 uprights with 1m bay distance as a set including bolts. Key advantages: Easy assembly – the rack is designed for straightforward installation with minimal effort. Versatile application – whether in the garage, workshop, or for small spaces, the shelf adapts flexibly. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Gamybos metai: 2020, būklė: naujas, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay spacing). The example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized IPE 160 / 100 Each with 2x3 adjustable arms, 1.20m length, 750kg load capacity per arm With bracing, approx. 1.30m Double-sided upright, approx. 3500mm high, hot-dip galvanized Foot and arm depth 1200mm, each with 3 height-adjustable rack arms Load capacity at load centre 600 mm: 750kg per arm / 2,250kg per upright side With longitudinal and diagonal bracing e = 1,300mm, standard is 1.30m. Other standard bay lengths available ex stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For a length of 1.50m and above, a small surcharge is added to the stated price! Special sizes (other bay spacings) are also available upon request for an extra charge and longer delivery times as they need to be custom-built! Iodpfx Alofivhgjrsau If you do not specify otherwise, we will supply the rack with a bay spacing of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approx. 4m. Delivery includes all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Būklė: naujas, OHRA Cantilever Racking Negotiation price: €5,940.00 net ex stock You are bidding on a racking unit with a length of 7.5 m, consisting of: - 6 uprights with base, 6 m high - 4 adjustable cantilever arms per upright (120 cm each), load capacity 900 kg/arm - Diagonal bracing, cross bracing, and spacers included - Bridges, mesh decking, and chipboard shelves are available separately for an additional charge Frame spacing: 150 cm Arm length / cantilever: 120 cm Load capacity: 900 kg per cantilever arm Load capacity per upright per side: 3,600 kg Over 100 meters available Heights of 2.5 m, 3 m, or 4 m available Other configurations upon request (Modifications and errors in technical data, specifications, and prices as well as prior sale reserved! Please refer to our General Terms and Conditions. All prices excl. VAT ex stock.) Purchase / Sale: We are constantly seeking and offering numerous items from various fields: - Machinery from all industries Iasdpfx Asby Uunelrsu - Clearance stocks - Special lots - Broom-clean operational clearances - Business liquidations - Purchase of clearance stocks Fast – Flexible – Efficient! We also clear out and/or dispose for insolvency administrators. Send us a short message with your requirements and we will get back to you promptly.

Būklė: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING1+11, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 050 mm, bendras ilgis: 21 000 mm, bendras plotis: 2 150 mm, bendras aukštis: 3 050 mm, ašių atstumas: 1 900 mm, apkrova vienai atramai: 7 500 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 7 000 kg, Įranga: dvipusis, OHRA K60K – double-sided cantilever racking system for long goods / heavy-duty racking Iasdpfxov Smk Io Alrsu Two racks available! 12 uprights – 48 cantilever arms K60K Height: 3.05 m – uprights IPE200 – upright spacing 1.9 m center-to-center Total depth approx. 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Including wooden inserts In very good condition, see pictures Forklift available for loading onsite Collection by appointment only in 75053 Gondelsheim Shipping via freight forwarding possible, please inquire with postal code

Būklė: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING2/3/4/5/6/7, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 000 mm, bendras ilgis: 21 000 mm, bendras plotis: 2 150 mm, bendras aukštis: 3 000 mm, ašių atstumas: 1 480 mm, apkrova vienai atramai: 7 500 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 6 000 kg, Įranga: dvipusis, Ohra - double-sided cantilever rack for long goods, heavy-duty racking system Comprising 15 uprights + 60 cantilever arms Height: 3.05 m – uprights made from IPB200 (HEB200) – upright spacing 1.48 m (center-to-center) Total depth: 2.15 m (double-sided) Isdpfx Aov Smm Njlroau Arms: 90 cm – IPE100 Load capacity per arm: 1000 kg Load capacity per upright: 7500 kg Wooden inserts can be supplied on request. Six racks available!!! 4 units with 4 levels – 60 arms each 2 units with 6 levels – 90 arms each, with an extra charge of 2,000 EUR Very good condition, see pictures Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight forwarder possible, please inquire with your postal code

Būklė: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING8+10 / 9, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 000 mm, bendras ilgis: 21 000 mm, bendras plotis: 2 150 mm, bendras aukštis: 3 000 mm, ašių atstumas: 1 480 mm, apkrova vienai atramai: 7 500 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 6 000 kg, Įranga: dvipusis, Ohra - Double-sided cantilever racking for long goods, heavy-duty shelving Consisting of 10 uprights + 40 cantilever arms Height 3.05 m – Uprights IPB200 (HEB200) – Distance between uprights 1.48 m center-to-center Total depth 2.15 m (double-sided) Arms 90 cm – IPE100 steel profiles Load capacity per cantilever arm: 1,000 kg Load capacity per upright: 7,500 kg Wooden inserts can be supplied upon request. 3 racks available in total! Nos. 8+10 – 4x with 4 levels – 40 arms No. 9 – 1x with 6 levels – 60 arms (plus €1,000 surcharge) Very good condition, see photos. Iasdpfx Aljv Smrxersu Forklift available for loading. Collection by appointment only in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code.

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING11, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 000 mm, bendras ilgis: 18 000 mm, bendras plotis: 2 000 mm, bendras aukštis: 3 000 mm, ašių atstumas: 1 500 mm, apkrova vienai atramai: 7 000 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 6 000 kg, Įranga: dvipusis, Cantilever rack, long materials rack, heavy-duty rack - double-sided Consisting of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (double-sided) Arms 90cm - IPE100 Load capacity per arm 1000kg Iodpfxsv Smr Sj Alroau Load capacity per upright 7000kg Arms are continuously adjustable Including cross-braces from arm to arm, including wooden shelves/inserts Very good condition, see pictures Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping by freight forwarding possible, please enquire with your postcode

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth Iaodped Tbbdjfx Alreu - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. Iodemhhx Ijpfx Alreau We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) Iasdpfx Alsmhhyasrju - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Ijdpfx Aeh Ek Daslrjau Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) Iedsd Tqalopfx Alrjau - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: Iodpefdkb Usfx Alrsau - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth Iaodpfxefdkbho Alreu - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments Iaedpfx Aemhhf Solrou - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ijdpfx Aemhhl Holrjau Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) Iajdpfx Alomidyforeu - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side Isdpfxjmkixwo Alroau - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Iaedpfx Aoqt Dmyjlrju Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.