Konsolinis stovas

SSI Schäfer Cantilever

Būklė: naudotas, Gamybos metai: 1999, galia: 3 kW (4,08 AG), įėjimo įtampa: 400 V, pjovimo aukštis (maks.): 200 mm, pjūklo disko skersmuo: 520 mm, bendras svoris: 350 kg, pjovimo ilgis (maks.): 420 mm, tvirtinimo skersmuo: 50 mm, pjūklo pavara: 3 000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, Year of manufacture: 1999 Saw swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Blade arbor: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from both sides, top-down Saw blade spray unit for coolant or lubricant Carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK 4000 mm, with fold-away material stop and scale Roller conveyor, 4000 mm long after saw Roller conveyor width: 350 mm Transport dimensions of the machine approximately 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approximately 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale in current condition Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Cedpfx Ansyh Nfue Hjrc For used machines, any warranty is excluded. Sold as inspected. Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock

Būklė: naujas, With the Brugger Power Split S22, we present a powerful vertical log splitter that impresses with a splitting force of 22 tonnes. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in terms of drive options—whether via electric motor or PTO shaft. Splitting is performed in two speed stages, enabling fast and efficient wood processing. Key features: Cedpfx Anotrlv Se Hsrc - 22T splitting force - Combination drive: 5kW electric motor & PTO shaft drive - Weight: 335kg - Log length up to 110cm - Log lifter - Two speed settings The scope of delivery includes a log lifter, which makes handling heavy logs much easier. An optional hydraulic winch is available, offering additional application possibilities and further simplifying operation. With a maximum splitting length of 110 cm, the Brugger Power Split S22 provides the flexibility to effortlessly process even larger logs. A support table for shorter pieces of wood is included as well. The Brugger Power Split S22 is the ideal choice for anyone seeking a reliable and high-performance solution for log splitting—whether for professional use or private applications. Prices: Power Split S22 = €2,670 Power Split S30 (30 tonnes) = €2,960 Support table for short wood = €125 4-way splitting wedge = €99 Hydraulic winch = €595 Contact us for your customised quote!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, An aluminium die casting machine is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mould locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Shot plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm²/338 cm², capacity: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar distance: 500 mm/500 mm, mould height min./max.: 250 mm/600 mm, min. mould dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Cedpfx Aneucfwpo Horc

Būklė: naudotas, Gearbox, bevel gearbox, worm gearbox -Gearbox: Worm gearbox, gear ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm Cjdpfxet Snwxs An Hsrc -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Būklė: naujas, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF Cedpfxsf Ddzqo An Hjrc 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2-M929 M1256 664P118-056-017-R-A2-M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF as well as other types, as a package

Būklė: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Crjdpfody Hm Dex An Hjc Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Maksimalus įrankio eigos ilgis – 250 mm. 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles Csdpfx Aeh Ek Daon Hjrc - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! Cedpswbknbefx An Herc You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Būklė: naujas, 50 running metres Jungheinrich MPB pallet racking, new New goods, see pictures Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam load capacity per level: 3,000 kg Asking price: €12,750 net ex stock Cjdpfx Anjlp Ntge Hjrc Offer includes: + 19 pre-assembled frames, depth 110 cm, height 9 m + 144 beams, length 2.7 m, 3,000 kg load per level + 288 safety clips + 78 concrete anchors Load capacity signs and documents included as standard. Further accessories available in our accessories catalogue. Frames painted blue, cross-bracing galvanized. Heights from 3.5 m to 9 m in stock. Bay load capacity 12 tonnes. Beams yellow. Goods in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information available on request. At all times, over 5,000 linear metres of pallet racking from various manufacturers in stock. (Subject to change and errors in technical details, specifications and prices, as well as prior sale! Please see our T&Cs. All prices excl. VAT, ex stock.) Purchase / Sale We are constantly looking for and offering numerous items from various fields – Clean company clearances – Business liquidations – Fast – flexible – solution-oriented! We also clear out and/or dispose of for insolvency administrators. Send us a short message, we will reply immediately. To access our page, please click on our logo!

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Crsdsiu Smbopfx An Hjc Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package