Richtmaschine 430X 1 Mm pirkti naudotą (115 392)

Būklė: naudotas, Aluminum silo with long base ring Technical data / Dimensions Available units: 1 Volume: approx. 105,000 liters Tank type: Silo Condition: used Food-grade: no Design: vertical Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Material / Characteristics Inner shell material: Aluminum Equipment Support type: Base ring / Support ring Mounting: fixed Top head type: Conical roof Inclination: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Top head features: - 2 x crane lugs - 1 x manhole DN 500 with cover - 1 x roof edge guardrail - 1 x flange DN 100 (silo pilot) Hedpfstxitcox Admsnk - 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: - 2 x flange DN 32 (min-max sensors) - 1 x fill line, runs from top into the silo, ends in coupling at bottom - 1 x access door with ventilation slots (approx. 850 x 2,500 mm) - 1 x cable protection conduit Notes: - The silo ends at the bottom with a 60° cone with flange and extraction box. - The silo displays cosmetic imperfections (brown discoloration, various drilled holes for cable ducts in the base ring), which do not impair the silo's functionality. The currently installed instrumentation and control equipment is included. However, no warranty is given for its functionality!

Būklė: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 01-14792, įėjimo įtampa: 80 V, bendras ilgis: 2 300 mm, bendras plotis: 2 900 mm, bendras aukštis: 1 400 mm, įvesties srovės tipas: trifazis, paskutinio kapitalinio remonto metai: 2024, įėjimo srovė: 50 A, Svecia serigrafinė spausdinimo mašina, mažo formato, 1 spalva Yra keletas serigrafinių spaudos mašinų ir 2 spalvų mašinų su priedais ir aksesuarais (žr. nuotraukas) Hnjdpfexz R Avjx Admok

Būklė: naudotas, mašinos/transporto priemonės numeris: FN1242U, FN1243U, 2x vienos sijos tiltiniai kranai 6.800 mm x 1.600 kg Hnjdpeq D Afgsfx Admek

Būklė: naudotas, Lettino in ghisa 2600 x 2000 x 350 mm Lunghezza: 2600 mm Larghezza: 2000 mm Spessore: 350 mm 8 cave a T Dimensioni cave a T: 55 x 35 mm Interasse cave: 250 mm Hjdpfx Adswlhd Ujmjnk Dotato di 12 piedini di livellamento Peso: ca. 4,5 T

Būklė: naujas, Parduodamas aukštos kokybės BOA gamintojo kompensacinis (lankstus) žarnų vamzdis, pagamintas iš nerūdijančio plieno, skirtas pramoniniam naudojimui. 📋 Techniniai duomenys: Gamintojas: BOA Tipas: SP20 (Ringwellschlauch gofruota žarna) Nominalus diametras: DN65 Ilgis: 2000 mm Darbinis slėgis: PN16 Jungtys: flanšinės Medžiaga: nerūdijantis plienas (INOX) Konstrukcija: gofruota žarna + plieninė apsauga Pažymėjimai: DIN / VdS ⚙️ Pritaikymas: - pramoninės sistemos - vandens tiekimo, dujų ir garo sistemoms - vibracijų ir temperatūrinių ilgio pokyčių kompensavimui - siurblių, vožtuvų ir vamzdynų apsaugai 📦 Būklė: Naujas – sandėlio likutis (NOS) Galimi nežymūs sandėliavimo pėdsakai (matomi nuotraukose). Prekė nenaudota, visiškai veikianti. ✅ Privalumai: - didelis atsparumas temperatūrai ir slėgiui - labai lanksti - patvari nerūdijančio plieno konstrukcija - sumažina vibracijas ir triukšmą 📸 Komplektacija: Hnjdpfxjyzi Hvs Admsk Tiksliai tai, kas matyti nuotraukose.

Būklė: naujas, Parduodamas aukštos kokybės kompensacinis (lankstus) BOA žarnos vamzdis, pagamintas iš nerūdijančio plieno, skirtas pramoninėms reikmėms. Hnedjyzixlspfx Admek 📋 Techniniai duomenys: Gamintojas: BOA Tipas: SP20 (Ringwellschlauch) Nominalus diametras: DN50 Ilgis: 1100 mm Darbinis slėgis: PN16 Jungtys: flanšinės Medžiaga: nerūdijantis plienas (INOX) Konstrukcija: banguotas vamzdis + plieninis tinklas Žymėjimas: DIN / VdS ⚙️ Pritaikymas: - pramoniniai įrenginiai - vandens ir dujų sistemos - šildymo ir garo sistemos - vibracijų ir terminio ilgio kompensacija - siurblių ir armatūros apsauga 📦 Būklė: Naujas – sandėlio likutis (NOS) Galimi nežymūs sandėliavimo pėdsakai (matyti nuotraukose). Produktas visiškai veikiantis, nenaudotas. ✅ Privalumai: - didelis atsparumas temperatūrai ir slėgiui - labai geras lankstumas - tvirta nerūdijančio plieno konstrukcija - vibracijų ir triukšmo sumažinimas sistemoje 📸 Komplekte: Tai, kas matoma nuotraukose.

Būklė: naujas, For sale: high-quality steel compensator (compensator hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Made from stainless steel 1.4404 (INOX), it is ideally suited for demanding environments (water, gas, industrial, and process installations). ⚙️ Technical specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure: PN16 Material: stainless steel 1.4404 (INOX) Type: compensator hose / steel compensator Connections: flanged Construction: corrugated hose + steel braiding Standards: ISO 10380 / DIN 📏 Dimensions Internal diameter approx.: 125 mm Total length: approx. 1500 mm ✅ Advantages ✔ Reputable manufacturer BOA ✔ Very high corrosion resistance ✔ Long service life ✔ Vibration and stress damping ✔ Flexible construction ✔ Fast installation (flanges) Hnsdpfeyzirxsx Admek 📦 Included 1x DN125 compensator (as shown in the pictures)

Būklė: labai geros būklės (naudotas), Mašina birių medžiagų ar smulkių metalinių detalių sijojimui ir rūšiavimui. Labai gera būklė – pilnai sukomplektuota, su originaliu pavaros varikliu, valdymo spintele ir kalibracinių sietų komplektu. • Gamintojas: SCHWANOG Günter KG, Villingen / Juodoji giria • Modelis: RAPID SBM 63G • Pagaminimo metai: 1972 • Pavara: Bauknecht variklis, 0,55 kW, 380/220 V, 2850 aps./min. • Valdymo spinta: Carl Kurt Walther GmbH, Wuppertal • Plieninė konstrukcija, stabili rėminė bazė su transportavimo ratukais • Trifazis maitinimas 400 V • Pilnas kalibruojančių sietų rinkinys ant medinių rėmų (numeriai 1–6) • Sietų skylučių dydis: nuo 2 mm iki 15 mm • Galima reguliuoti ir keisti sietus • Pagrindinis jungiklis, start/stop valdymas ir apsauga nuo perkrovos • Labai gera būklė – po išmontavimo iš gamyklos, techniškai tvarkinga Po bazinės apžiūros mašina paruošta darbui. Idealiai tinka: metalo apdirbimo įmonėms, liejykloms, pramonės laboratorijoms, granuliatų, smėlio ar detalių rūšiavimui. Hnjdpfx Aoxmt Eqodmek

Būklė: naudotas, Profesionali matavimo plokštė iš granito – žinoma Mitutoyo / Planolith kokybė (pagaminta Vokietijoje). Idealiai tinka kokybės kontrolei, įrankių dirbtuvėms bei metrologijai. Parametrai: • Stalo matmenys: apie 1200 x 800 mm • Storis: apie 170 mm • Svoris: apie 460 kg • Tikslumo klasė: DIN 876/0 (didelis tikslumas) • Leistinas nuokrypis: 0,009 mm • Faktinis nuokrypis: 0,00273 mm • Gamintojas: Planolith GmbH / Mitutoyo • Pagaminimo šalis: Vokietija • Komplekte: tvirta plieninė bazė Privalumai: • Labai aukštas matavimo tikslumas • Stabili konstrukcija – sunkus granitas slopina vibracijas • Puikiai tinka matavimams, ženklinimui, detalių kontrolei • Profesionalus įrenginys • Paruošta darbui Hedpeyw Ubqjfx Admonk Būklė: Naudotas gaminys – yra įprastų naudojimo žymių (matomi įbrėžimai ant paviršiaus), tačiau visiškai veikiantis ir išlaiko visas eksploatacines savybes.

Būklė: labai geros būklės (naudotas), Parduodama profesionali vamzdžių briaunų šalinimo staklės TUBOGRAT, pagamintos Vokietijos įmonės Tracto Technik Spezialmaschinen. Įrenginys skirtas vamzdžių galų apdirbimui ir vidinių bei išorinių užuomazgų pašalinimui. Puikiai tinka dirbtuvėms, gamybai ir montavimui. Tvirta konstrukcija užtikrina ilgą ir patikimą darbą. Techniniai duomenys Gamintojas: Tracto Technik Spezialmaschinen KG Hodpfxoyvgp Te Admenk Modelis: TUBOGRAT TG 138 Skersmenų diapazonas: 6–42 mm Sukimosi greitis: 180 aps./min. Sukimosi kryptis: kairė Maitinimas: 380 V Fazės: 3 Dažnis: 50 Hz Galia: 0,12 kW Srovė: 0,4 A Būklė Įrenginys geros techninės būklės Matomi naudojimo požymiai Mašina veikianti

Būklė: labai geros būklės (naudotas), Parduodama profesionali granito matavimo plokštė (trasavimo plokštė), naudojama kokybės kontrolei ir įrankių gamyboje. Plokštė pagaminta iš aukštos kokybės techninio granito, užtikrinančio labai gerą matmenų stabilumą ir atsparumą dilimui. Idealiai tinka tiksliems matavimams, trasavimui ir detalių kontrolei. Hjdpfx Adoyuqtpomsnk Komplektas yra ant tvirtos plieninės bazės. Įranga iš pramonės įmonės. ⸻ Techniniai duomenys • Tipas: matavimo / trasavimo plokštė • Medžiaga: techninis granitas • Plokštės matmenys: apie 1600 × 1000 mm • Storis: apie 200 mm • Svoris: apie 1014 kg • Bazė: plieninė konstrukcija Ant plokštės yra įmonės Trescal kalibravimo lipdukas. ⸻ Pritaikymas • kokybės kontrolė • įrankių gamyba • CNC pramonė • tikslūs matavimai • detalių trasavimas

Gamybos metai: 2026, būklė: naujas, Our KVK 1S – Economic is our most affordable option for acquiring a semi-automatic stretch wrapper. Only the application and removal of the film must still be performed manually with this wrapper. The model is robustly built with a weight of 600 kg and is designed for loads of up to 1,500 kg. The KVK 1S Economic features a 1,500 mm turntable and can wrap pallets up to a height of 2,250 mm. With adjustable speeds for both the turntable and film carriage, as well as a mechanical brake, you can easily tailor the automated wrapping process to your product. Automatic pallet detection is standard, as are adjustable top and bottom wraps. The machine offers programs for “up only” wrapping, “up & down” (cross wrapping), as well as “weatherproof” wrapping. If required, the wrapper can also be operated manually. Hnedpfx Adoy Drkpsmjk If the wrapper needs to be relocated, it can easily be lifted and moved with a forklift, thanks to integrated cut-outs. Optional features include a drive-on ramp and a photocell for the detection of dark packages or black film. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic pallet wrapping with the lowest possible investment. This machine is ideal for shippers handling up to approximately 10 pallets per working day. For further information, the technical data sheet is attached to this advertisement as a PDF!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. Hsdpfsmhhypex Admsnk The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Hnedpfx Aomhh Dhedmsk - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. Hnjdpfx Adjmhh Dzsmek The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm Hnjdpfx Adomhhx Iemjk - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Hodpfsmhhyajx Admsnk Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard Hnodpfeh Ek Daox Admjk - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Hnsdpfxomhh Ane Admjk - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Hsdsmhhf Sspfx Admenk - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Hnjdpsmhhl Hjfx Admok Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Hsdpsmidyfsfx Admenk Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg Hnjdpemkixwefx Admok - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) Hjdomhh Dtspfx Admjnk - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: labai geros būklės (naudotas), Profesionali frezavimo ir gręžimo laikiklių rinkinys su SK40 / ISO40 kūgiu pagal DIN 69871 A standartą. Komplekte apie 25 paruoštų naudoti įrankių su sumontuotomis frezomis ir grąžtais. Įrankių skersmens diapazonas: nuo Ø4 mm iki Ø12 mm – idealus rinkinys serijinei gamybai. Laikiklių ilgis: 50 mm – kompaktiški ir preciziški, idealiai tinka CNC apdirbimo centrams. Rinkinį sudaro įvairių tipų įrankiai: cilindriniai galiniai frezai, sriegikliai, išplėstuvai, VHM grąžtai, nuožulninimo įrankiai. Dalies įrankių paviršius padengtas – tinka plieno, nerūdijančio plieno, aliuminio ir ketaus apdirbimui. Visi laikikliai naudoti, techniškai geros būklės – patikrinti ir paruošti naudoti iš karto. Žinomų prekės ženklų gaminiai: ZÜRN Vokietija ir Orion. Galima įsigyti visą rinkinį arba atskirus vienetus. Hnedexldr Eopfx Admjk