Centauro Co 600 pirkti naudotą (37 361)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 2 600 h, ABB IRB4600-45/2.05 robotas ir IRC5 valdiklis-TPU-RW6.X GSG ROBOTICS PLĖTRA GSG Robotics GmbH įkurta 2005 m. Guterslohe, o nuo 2015 m. įsikūrusi Marle su plačia paslaugų sritimi robotų priežiūrai ir remontui. Bėgant metams tapome visapusišku partneriu visais pramoninių robotų ir automatizavimo technologijų klausimais. Esame visapusiškas paslaugų teikėjas dviem gerai žinomiems robotų gamintojams – ABB ir Fanuc. Ledpoxq Tq Ujfx Abreab

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, ABB IRB7600-340/2.8 + IRC5 valdiklis + TPU GSG ROBOTICS PLĖTRA GSG Robotics GmbH, įkurta 2005 m. Geterslohe, nuo 2015 m. įsikūrusi Marle, siūlo platų paslaugų spektrą robotų priežiūros ir remonto srityje. Per metus tapome visapusišku partneriu visais pramoninių robotų ir automatikos klausimais. Teikiame visapusiškas paslaugas dviem žinomiems robotų gamintojams ABB ir Fanuc. Lodpfsxq Tuasx Abreab

Būklė: labai geros būklės (naudotas), ABB IRB4600-60/2.05 robotas ir IRC5 GSG ROBOTIKOS PLĖTOTĖ GSG Robotics GmbH, įkurta 2005 m. Gütersloh mieste, nuo 2015 m. įsikūrusi Marle, turi plačią techninės priežiūros zoną robotų aptarnavimui ir remontui. Per daugelį metų tapome visapusišku partneriu visais pramoninių robotų ir automatikos technologijų klausimais. Esame kompleksinis paslaugų teikėjas dviems žinomiems robotų gamintojams – ABB ir Fanuc. Lajdpfxsxq Tq Ie Abrjb

Būklė: geras (naudotas), Colchester / Harrison / 600 Lathes TORNADO 300 CNC Lathe TECHNICAL DATA Spindle Power: 18 / 22 kW Spindle Nose: A2-8 Spindle Bore: 90.5 mm Chuck Size (A Type): 265 mm Draw Tube Diameter: 82 mm Front Bearing (Inner Diameter): 130 mm Max. Spindle Speed: 4000 rpm X-Axis Travel: 240 mm Travel Above Turning Center: 213 mm Below Center Travel: 27 mm Z-Axis Stroke: 500 mm Feed Rates: Rapid Traverse X-Axis: 10 m/min Rapid Traverse Z-Axis: 20 m/min Min. Feed Increment: 0.001 mm Tool Turret: Lajdpfernkhyox Abrsb Turret, Number of Stations: 12 Tool Holder Interface: VDI 3425 / 40 Turning Tool Shank Size: 25 x 25 mm Max. Boring Bar Diameter: 40 mm Tailstock Quill Diameter: 95 mm Quill Taper: No. 5 Morse Taper (MT5) Quill Stroke: 125 mm Tailstock Travel: 485 mm Max. Axial Force on Tailstock Quill: 7,860 N Swing Diameter: 530 mm Turning Diameter over Cross Slide: 330 mm Max. Machining Diameter: 300 mm Max. Turning Length: 500 mm Center Height above Floor: 913 mm Bed Width (Z-Direction): 750 mm Bed Width (X-Direction): 393 mm Tailstock Guide Bed Width: 255 mm Cross Slide Width: 256 mm Bed Slide Inclination: 600 mm Footprint: 3.26 m² Weight: 3,300 kg We do not guarantee the accuracy, completeness or up-to-dateness of this information.

Būklė: paruoštas naudoti (naudotas), Parduodamas senas Colchester tipo valdomų ir tempiamų velenų tekinimo staklės. Centrų aukštis: 216 mm, apsisukimo skersmuo virš lovos/vežimo/į išpjovą: 432 mm/267 mm/711 mm, centrų atstumas: 2000 mm, špindelio skylė: 76 mm, sūkių dažnis: 1600 aps./min., lovos plotis: 343 mm. Staklių matmenys X/Y/Z: apie 3200 mm/1100 mm/1400 mm, svoris: apie 2500 kg. Galima apžiūra vietoje. Lodpfx Ajy E S D Eobreab

Būklė: naudotas, We are offering used grating panels for sale. Ljdpfx Aboy H Hg Dsrjab TECHNICAL DATA Dimensions: 600 x 1,790 x 38 mm Mesh size: 45 x 25 mm Surface: galvanised Condition: used PRICE €161.00 net per unit (10 pieces) €191.59 gross incl. VAT Available quantity: 117 pieces YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional cost. Additional costs depend on the place of delivery and the scope of the shipment and can be provided upon request. PROJECT PLANNING Our sales team will be pleased to prepare a non-binding, customised offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. TERMS OF PAYMENT Payment terms are to be agreed on a case-by-case basis. All prices are quoted per item/net price, or as otherwise stated in the description (plus VAT). You will, of course, receive an invoice with VAT separately shown. ABOUT US Based in Nordhorn, DLK trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines and equipment for trade, industry, and skilled crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. For any questions, please feel free to contact us. Four to win – The four success factors at DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, We offer used grating panels here. TECHNICAL DATA Dimensions: 600 x 1,630 x 40 mm Mesh size: 45 x 25 mm Surface finish: galvanized Condition: used PRICE €150.00 net per packaging unit (10 pieces) €178.50 gross incl. VAT Available quantity: 304 pieces YOUR CONTACT PERSONS: Laedpfoy H Hc Sox Abrsb Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transportation and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. These extra charges depend on the delivery location and scope of the shipment, and can be quoted individually upon request. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transportation and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon in case of an order. The price stated is per unit/net, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and craft businesses. We continuously offer an attractive selection of used equipment from various manufacturers/brands at competitive terms. If you have any questions, please do not hesitate to contact us. Four wins – The keys to DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, We offer used grating panels for sale here. TECHNICAL DATA Dimensions: 600 x 800 x 38 mm Mesh: 40x20 mm Finish: galvanized Condition: used PRICE €72.00 net per unit (package of 10 pieces) €85.68 gross incl. VAT Available quantity: 306 pieces YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION Ljdjy H E H Nepfx Abrsab We will be happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional cost. The extra charges depend on the destination and the size of the shipment and can be quoted individually on request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding, customized offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon when placing the order. The price is quoted as a unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with the VAT shown separately. ABOUT US DLK in Nordhorn deals in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for commerce, industry and the skilled trades. We continuously offer you interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four in a Row – The Four Success Building Blocks at DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, slėgis (maks.): 250 juosta, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right-hand or left-hand bending. The plug-in bending tools allow for rapid changeover to different tube sizes. A rapid-action hydraulic system for reducing ancillary times is a key factor in series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In "Simple Bending" mode, the length and rotation of the bends relative to each other are automatically displayed. In "Controlled Bending" mode, the data is pre-set and a permanent actual/target comparison is carried out during the bending process. This eliminates mispositioning within a tolerance window, thereby minimizing operator-induced error rates. General error messages are shown in full text on the large display. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for on-site installation as well as for special designs with very large tube feed, and is also available in a stationary version with a tool and mandrel rod organization system. The cost-effective alternative to fully-controlled CNC machines. POSSIBLE APPLICATION AREAS: • Hydraulics piping • Pipeline construction • Plant engineering, e.g. chemicals Lodpfjng Exaox Abrjab • Metal construction • Prototyping Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer) • Maximum bending result: 180º • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety footswitch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic brake function or manual stops via footswitch • Automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Advisory and consultation meeting at your location • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room Laodpfx Asnh R Ekobrjb • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, lenkimo spindulys (min.): 9 mm, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Laedpfondn Agsx Abrsb Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 35 mm, Vamzdžio sienelės storis (maks.): 2 mm, Lenkimo kampas (maks.): 360 °, lenkimo spindulys (maks.): 150 mm, lenkimo spindulys (min.): 32 mm, bendras svoris: 28 kg, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, kojinis nuotolinio valdymo pultas, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. Lajdpfx Asnfvx Njbreb For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. Lodpfjndk N Ajx Abroab POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance Lsdpfxeng Amko Abreab

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor Lajdpjng A R Ssfx Abrsb • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 8 mm, Lenkimo kampas (maks.): 195 °, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube diameters from 15 - 100 mm. Depending on material quality and wall thickness ratio, radii as small as 1.5xD can also be reliably achieved in series production. With a tool height of 120 mm, ample options for special profiles are available as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid construction of the mandrel carrier and bending arm, all contribute to the desired bending results. The plug-in bending tools allow for quick changeover to other tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (easily expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited numbers of programs for bending angles, length dimensions, and rotational angles for up to 50 bending sequences per tube length. Lodpfx Abjnh R Sueroab A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In 'Simple Bending', the lengths and angles of the bends are automatically displayed in relation to each other. In 'Controlled Bending', the data is preset and during the bending process a continuous actual/target comparison is performed. Also available with pneumatic rotary stop or with gear-assisted length and rotational positioning. POTENTIAL APPLICATIONS: • Plant construction, e.g. chemicals • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Max. 180º bend angle achievable • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chucks • Larger bending radius up to 300 mm • Length and angle positioning via automatic braking system or manual stops with foot switch • Semi-automatic length and angle positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome at our in-house demo room • Consultation and information onsite at your facility • Consultation and processing for leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 1018, valdymo tipas: PLC valdomas, automatizacijos lygis: vadovas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 50 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software Lajdpfx Aonfvy Ujbrob OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, veikimo valandos: 6 361 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 510 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 30 m/min, valdiklių gamintojas: Siemens, valdiklio modelis: 840D ShopMill, ruošinio ilgis (maks.): 900 mm, ruošinio plotis (maks.): 560 mm, ruošinio aukštis (maks.): 630 mm, ruošinio svoris (maks.): 600 kg, bendras aukštis: 3 000 mm, bendras ilgis: 4 000 mm, bendras plotis: 5 000 mm, stalo plotis: 900 mm, stalo ilgis: 560 mm, stalo apkrova: 600 kg, bendras svoris: 5 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 6 361 h, veleno nosis: SK40 (DIN69871), ašies skaičius: 1, įrankių magazino lizdų skaičius: 30, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Šį japonišką DMG MORI ecoMill 600V įrenginį perėmėme veikiantį iš gamybos – jis yra tvarkingos būklės. CMX 600V (ecoMill 600V) turi C-formos rėmo konstrukciją (klasikinis išdėstymas) ir judantį stalą (X ašis), kuris skirtas universaliems ir bendriesiems frezavimo darbams. Papildomos opcijos ir priedai: - Siemens 840D SlimLine su 3D simuliacija. - PROGRESSLine (likusio gamybos laiko ir viso apdirbimo proceso pagamintų detalių skaičiaus rodymas). Ledpfx Ajy Dg Eujbrsab - Drožlių transporteris - Praplovimo pistoletas - Paruošimas vidiniam aušinimui. - Originali dokumentacija

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 325, Bielomatik Jumbo Roll Collator, collating system for sets with 5 webs, including cross cutter and numbering unit. Lasdey Nyb Tjpfx Abrob Production Specifications: Format length: 406.4 – 635 mm (16 – 25 inches) Format length increments: 1/12 inch Paper weight: 90 – 160 g/m² Production capacity: 12-inch single-web 10,000 sets/hour Delivery type: Sheet or Fold Unwinding: 5x up to 1270 mm rolls with 70 mm core diameter, 4x up to 700 mm rolls with 70 mm core diameter Web width: max. 500 mm Number of numbering stations: 1 (2-web numbering possible) Letterpress: 1x letterpress numbering unit for 24 inches and 25 inches Working width: 500 mm Inkjet: possible Cross perforation station: 1 Tools: Tool 1 x 16 inches: special configuration 4 1/3 inch, 4 3/12 inch, 12 1/6 inch Tool 1 x 17 inches: configuration 4 1/4 inch, 8 1/2 inch, 17 inch Tool 1 x 24 inches: configuration 6 x 4 inches (4 inch, 6 inch, 8 inch, 12 inch) Tool 1 x 24 inches: special configuration for cross perforation 18 mm (e.g. snap-out forms) Tool 1 x 25 inches: with gear configuration as 24 inches Stapling: No Crimping: 4 crimping tools for 2-web production as 2-inch Swedish crimping possible Longitudinal gluing: Continuous and intermittent double-sided gluing possible for 16 inch, 17 inch, and 24 inch. Not intermittent for 11 4/6 inch and 12 1/2 inch Cross gluing: 2 cross gluing units 24 inch, Type ESS 17 inch glue cylinder 2 units Edge trimming: max. 15 mm each side, min. 5 mm one side Separation cut: Yes, for dual output Fold lengths: 7 1/3 to 17 inches possible Format gears for 16 inch, 17 inch and 24 inch available; 11 inch & 13 inch available (cross perf. must be produced on printing machine). 11 4/6 inch + 25 inch + 9 inch correction gears Accessories: Fold gears: 8 inch with 24 inch cylinder 8 1/3 inch with 24 inch cylinder and 25 inch gear 8 1/2 inch with 17 inch cylinder 9 inch with 9 inch gear on 17 inch cylinder 11 4/6 inch with 11 4/6 gear 12 inch with 24 inch cylinder 12 1/2 inch with 24 inch cylinder + 25 inch gear 16 inch with 16 inch cylinder 16 inch cross perforation, payment slip + fold on Bielo (perforation height special 17 mm) 17 inch with 17 inch cylinder

Būklė: naudotas, Vėžių plotis ± 600 mm Bendra elektros galia: 33 kW terminis pajungimas: NW32 2x5 sluoksnių maksimali gaminio aukštis: ± 100 mm virimo laikas min/maks: 4-40 min maksimali temperatūra: 200°C automatinis keltuvas su juostos plovimo sistema tinka CIP valymui Ljdpfx Aoy Emtuobrsab tinka garų įpurškimui (šildymui, gaminio išeigai): 4-8 bar, pajungimas: NW 40 kairys sukimasis

Gamybos metai: 2012, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9332067, RIEDANTIS TRANSPORTERIS - KONSTRUKCINĖ SMĖLIAVIMO ĮRANGA GAMINTOJAS: RUMP TIPAS: 20-W 1500-4 Gamintojas: Rump Tipas: 20W-1500-4 Pagaminimo metai: 2012 Išmatavimus ir darbo valandas rasite techniniame brėžinyje. Komplekte yra filtravimo sistema, garso izoliacija, elektros skydinė, pilna dokumentacija ir kt. PUIKIOS BŪKLĖS Lsdjy Entiopfx Abrjab Tai veikiantis, naudotas įrenginys. Parduodama be garantijos ir be jokių įsipareigojimų. Pasiliekama teisė į tarpinius pardavimus ir galimas klaidas.

Gamybos metai: 2024, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have powered up the machine and let it run unloaded for a few minutes to verify its functionality. It comes with 4 nylon containers, each with a capacity of 25 liters. Additionally, 120 kg of zirconia balls with a diameter of 1 mm are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a device designed for industrial applications, engineered for medium production capacities to meet the manufacturing requirements of enterprises. It facilitates the seamless transition of materials from laboratory scale to production, ensuring process consistency and reproducibility, thereby enabling consistently high performance of the produced materials. The system is widely used in sectors such as new energy, metallurgy, electronics, ceramics, geology, mining, building materials, chemical industry, light industry, cosmetics, environmental protection, and various material processing departments of enterprises. The extremely high centrifugal forces generated by planetary ball mills create significant pulverization energy, resulting in very short grinding cycles. They are suitable for industries where the quality control process demands the highest levels of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is ideally suited for research tasks at scientific institutes, universities, and corporate laboratories to investigate the scalability of mass production processes, as well as for routine tasks such as mixing and homogenizing soft, hard, brittle, or fibrous materials, from experimental scale up to full production. - Key Features: - High-performance nano-scale grinding - Digital display, user-friendly operation, precise parameter settings - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing for up to 4×6/9 L samples, simultaneous handling of 4 different materials - Electric lid opening and integrated crane for convenience and ease of use - Storage for 3 modes and 15 programs - Power failure protection with memory function and auto-restart - Suitable for dry milling, wet milling, vacuum milling, and inert atmosphere milling - Machine stops when the lid is opened, with automatic locking to prevent unintentional opening - Equipped with casters and rotatable feet for easy movement and stable positioning during operation Applications: Grinding, mixing, homogenization, colloidal milling, mechanical alloying, mechanochemistry Fields of use: New energy, geology/metallurgy, glass/ceramics, engineering/electronics, construction materials, environment/recycling, agriculture, chemicals, medicine, biology Feed materials: Soft, hard, brittle, fibrous – dry or wet Comminution principle: Impact, friction Feed size: < 5 mm (soil), < 10 mm Final fineness: For colloidal grinding, sample finer than 0.1 micron Number of grinding stations: 4 Lajdpfxsyilnze Abrjb Milling modes: Dry milling, wet milling, vacuum milling, milling under protective atmosphere

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, stalo ilgis: 800 mm, stalo plotis: 1 060 mm, darbinio aukščio: 400 mm, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė - naudotas pjūklas Pjūklas: - ratų skersmuo: 800 mm Lajdpfew H Rq Hox Abrsb - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Ljdpfxsyz Af Es Abrsab Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: geras (naudotas), bendras ilgis: 1 000 mm, bendras plotis: 600 mm, bendras aukštis: 2 500 mm, keliamoji galia vienai sandėliavimo sekcijai: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load: 150 kg • Number of shelves per section: 6 pieces • Surface: galvanized • Boltless assembly • Condition: used Large quantities available for immediate delivery. Tiered net prices per item, plus VAT: Starter section: 1 - 5 sections: €92.30 6 - 20 sections: €88.61 21 - 50 sections: €84.92 from 51 sections: €81.22 Add-on sections: 1 - 10 sections: €63.55 11 - 25 sections: €61.01 26 - 75 sections: €58.47 from 76 sections: €55.92 Available ex stock Nordhorn. YOUR CONTACT PERSONS: • Tanja Henkelmann • Rainer Nürenberg Laedpfxjuk E Thj Abrsb • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional fee. The extra costs depend on the delivery location and the size of the shipment and can be requested directly from us. PAYMENT TERMS Payment conditions are to be agreed upon at the time of order. The price stated is per item/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands at competitive prices. If you have any questions, feel free to contact us. Connect Four – The four DLK success factors: Storage Technology | Levelmaker® | Logistics | Solutions