Brigas Industries Powder Coating Spray Booth pirkti naudotą (31 010)

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Isdsfz Dt Nepfx Ab Njti Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Isdpjfz I D Dofx Ab Nsti Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. Isdpefz I Edefx Ab Nsti It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Touch to Delete Ijdpfx Abofz I Eho Neti ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ Ijdpfx Aofzccnob Neti 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer Iedpsfzkrnefx Ab Noti It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2026, būklė: naujas, ROMER cabins are equipped with 4" color touchscreens. The cabin is operated intuitively in three modes: automatic (time-based), automatic (based on a clogged filter sensor), or manual. Itedofzkzhepfx Ab Noi Automatic filter cleaning The electronic system for automatic filter cleaning offers an adjustable range for cleaning frequency and ignition timing. Each filter is cleaned individually, and filters can also be cleaned manually via the control buttons. From experience, we know that it’s difficult for the operator to consistently perform filter cleaning. Thanks to this system, the operator no longer needs to worry about it. Aluminum fans are very quiet, operating at 74–79 dB—which is not very loud. It is difficult to talk, even with a standard cabin design. Browse through the cabin By pulling the lifting rails inside the cabin, the cabin improves work efficiency and relieves the painter, who no longer has to move them by hand.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Isdpjfz A Iwofx Ab Njti Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 Isdpfjflk Awox Ab Neti 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Itsdpfx Aboflmdwj Noi - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2020, 🏭 MILTELIŲ DANGOS KABINA KPO-3 Iedoflk Akspfx Ab Noti Automatinis filtro valymas su reguliuojamu impulso laiku, taip pat rankinis režimas. 🧼⏱️🖲️ 100% poliesterio filtrai – plaunami, atsparūs vandeniui, ilgaamžiai. 🧵💧♻️ ROMER JET™ filtro valymas – patentuotas didelės spartos oro impulsas užtikrina efektyvų valymą. 💥💨🏅 Žemo triukšmo aliumininiai ventiliatoriai (74–79 dB) – saugesnis, apsaugotas nuo kibirkščių veikimas su mažomis energijos sąnaudomis. 🔇⚡🛡️ Reguliuojamas oro srauto deflektorius – antistatinė plokštė saugo filtrus ir pagerina ištraukimą. 🌬️🛡️📈 Sandarus filtrų tvirtinimas – tarpiklis ir spaustukas užtikrina sandarumą ir lengvą aptarnavimą. 🔩🧷✅ Jutiklinis valdymo ekranas – auto (laiko), auto (užsikimšimo jutikliu), rankinis + filtro keitimo perspėjimai. 📲🔁⚠️ Papildomas miltelių konteineris – atliekų surinkimui arba fluidizuotas bakas su tiesioginiu aplikatoriaus tiekimu. 🧺💨🎯 Viršutinis trauktuvas – perkelia sijas per kabiną, sumažina rankinį darbą. 🏗️➡️💪 Integruotas sijojimo įrenginys (su konteineriu) – švarūs atgauti milteliai pakartotiniam naudojimui, EX zonos vibrovariklis. 🧪♻️⚙️ Sprogimui atspari konstrukcija – komponentai parinkti taip, kad būtų išvengta sprogstamųjų mišinių susidarymo. 🛡️💥✅

Gamybos metai: 2020, būklė: naujas, 7" Touch Panel The large color touch panel is aesthetically pleasing and provides comfortable and intuitive operation. All key parameters can be set directly on it. Memory for 20 Programs with 10 Events It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is especially required for more demanding processes. Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of each specific cycle, plan consumption, and monitor personnel. Dual-Channel Recorder with USB Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to a flight data recorder—onto a USB stick. The system also allows analysis of monthly/daily reports, including media consumption and performance. Every heating cycle, each time the door opens, is tracked for several years. Such a dedicated solution is not offered by any other manufacturer. It is a system developed from scratch by our programmers: automatic smoke extraction flue The chimney can be programmed to open several minutes before the end of the firing process to vent the chamber. It can be remotely controlled from the control panel and does not need to be operated mechanically as with most systems. Minute-by-Minute End Time Forecast The cycle has started—how long will it last? If we calculate the heating dynamics, the system will display the remaining duration on the screen. To open, simply pull the door. The lock features adjustable pressure on the door. To close, just push it shut—the lock catches the door and retracts it automatically. Iodpfx Abofy Txys Nsti To minimize heat loss in the hall when the door is opened, a hood is installed above the door to divert part of the heat elsewhere. The MTS system was developed to provide true readings of the oven chamber temperature. Standard measurements are based on a single temperature reading, which is often inaccurate. MTS is a multi-sensor system, with sensors located at the furthest points of the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin controls are intuitive and offered in three operation modes: automatic (temporary), automatic (via plug-in filter module), or manual. Filter Module Sensor The cabins are fitted with a sensor that collects filters for cleaning once they are clogged. The system also notifies you when filters have reached their usage limit. Isdofzciqopfx Ab Njti Automatic Filter Cleaning The electronic filter cleaning system manages both the cleaning intervals and the ignition timing. Each filter is cleaned individually; filters can also be manually cleaned using a press. From experience, we know that requesting operators to clean filters manually can be challenging. With this system, operators no longer need to interrupt their workflow for filter maintenance. Low Noise Level Aluminum fans operate at a very quiet noise level of just 74–79 dB. Even with the standard cabin design, it is difficult to communicate verbally during operation. Improved Workflow Cabins equipped with suspended squirrel-cage fans enhance work efficiency, freeing up painters from the need to move fans manually. Please pre-order assemblies. Safety Design The remaining cabin elements are designed to prevent the rise of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. Ijdpfxsfzkqmo Ab Njti New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. Itsdpfx Abefz Nb Te Noi - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. Itedpfsfz U S Eox Ab Nji - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. Itjdefz U Tispfx Ab Nsi 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 Ijdpfx Absyg H Dhj Neti 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 5 000 mm, bendras plotis: 3 500 mm, bendras aukštis: 2 950 mm, vidinis aukštis: 2 650 mm, vidinis ilgis: 4 900 mm, vidinis plotis: 3 400 mm, Įranga: kabina, Vehicle Spray Booth Iodpfx Aboxnpczj Nsti The vehicle spray booth is an essential piece of equipment for paint repair technology. It allows painting work to be carried out under safe and comfortable conditions while minimizing negative impacts on the surrounding area and the environment. Technical Data: - External dimensions: 5000 (+ air supply unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance gate: 3000 × 2600 mm (three-winged) - Service door: 700 × 2000 mm - Structure: made of sheet steel - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin wall construction: - Thickness: 50 mm - Filling: EPS polystyrene - Colour: white Cabin floor: - Cabin mounted directly on the floor/concrete slab Double ceiling: - Outer ceiling covering - Full-surface plenum above the entire ceiling for supply air Air exchange system: - Supply air system: - Jet turbine 4 kW – 2 units - Air capacity: 26,000 m³/h - Extract air system: - Jet turbine 5.5 kW – 1 unit - Air capacity: 18,000 m³/h Lighting: - 8 side lamps - Ceiling lighting: 24 LED fluorescent tubes Air heating system: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filter system: - Double-layer filter structure - High-performance air cleaning system with a filter efficiency of up to 99%

Būklė: naujas, Gamybos metai: 2026, The illustrative photos show implementations for the customer-specific 4x7 spray booth. The offer applies only to the spray booth without a preparation area (option to purchase a preparation zone upon customer request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three-winged) Ijdpfxer Ha Ehs Ab Noti - Service door: 640x1800 mm - Structure: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 16 kW - Fully grated flooring - Air supply system: jet turbine 4.0 kW – 2 units - Exhaust system: power turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED tubular lamps, 32 units - Side lights: LED panel 120x30 cm – 8 units Power: 48 W – each 1000 lumens - Burner: Riello 40 G20 95-213 kW - The booth is available in various colors

Būklė: naujas, Gamybos metai: 2026, A two-zone container, divided into a paint booth and a preparation area - External dimensions: 6058x2438x2591 mm - Internal dimensions: 5538x2170x2485 mm - Shipping container: 20DV - Door: integrated into the booth door - Window: with metal security grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use - Paint booth wall – fully meshed Control – automatic via external central control unit; Itedjnbd Rropfx Ab Noi Power supply – 380 V Included: Eo3il2moj - Fan – 3 kW - Airflow velocity – 0.7 m/s - Air volume: 9500 m³/h - Recirculation – closed-loop system Heating: - Riello 40G20 oil burner - Heating up time 10–15 min dkm3db - Maximum temperature 800°C Filter system – pre-filter, paint stop filter, cardboard filter, activated carbon filter Safety features: - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indicator Equipment: - 16A power socket - Air preparation unit - Pneumatic hose reel

Būklė: naujas, Gamybos metai: 2026, A two-zone container, divided into a paint shop and a preparation area - External dimensions: 6058 x 2438 x 2591 mm - Internal dimensions: 5538 x 2170 x 2485 mm - Shipping container: 20DV - Door: integrated into the cabin door - Window: with metal security grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use Control: Fully automatic via external central control unit Power supply: 380 V Equipment supplied: Itedpfx Absnbd Nbj Noi - Fan: 3 kW - Airflow velocity: 0.7 m/s - Airflow volume: 9500 m³/h - Recirculation: Closed-circuit system Heating: - Riello 40G20 oil burner - Heat-up time: 10–15 minutes - Maximum temperature: 800°C Filter system: Pre-filter, paint stop filter, cardboard filter, activated carbon filter Safety features: - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indicator Equipment: - 16A socket outlet - Air preparation unit - Pneumatic hose reel

Būklė: naujas, Gamybos metai: 2026, - External dimensions: 7200 x 5200 x 3800 mm - Internal dimensions: 7100 x 5100 x 3100 mm - Entrance gate: 4000 x 3100 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: Stainless steel - Heat exchanger: Stainless steel - Panels: Filled with mineral wool - Total power: 21 kW Iedpsm Tv I Aofx Ab Noti - Seating: Inside/outside (after prior roofing of the cabin by the customer on their own) - Floor fully ground - Air supply system: Jet turbine 5.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 1 unit - Ceiling lights: Cassettes with LED fluorescent lamps, 32 units - Side lights: LED panels 120 x 30 cm – 12 units Output: 48 W – one-piece 1000 lumens - Burner: Riello RG5S 160–310 kW - The cabin is available in various colors

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Išsami specifikacija: Ijdpfx Abjxna U Us Noti - Vidiniai matmenys: 5500 × 1500 × 2300 mm (Ilgis × Plotis × Aukštis) - Išoriniai matmenys: 5700 × 1900 × 2700 mm (Ilgis × Plotis × Aukštis) - Įėjimo durys: Dviejų varstomų durų, 1700 × 2300 mm (Plotis × Aukštis) - Sienų plokštės: 100 mm storio, 950 mm pločio, liežuvėlio-griovelio konstrukcija; 0,5 mm plieno lakštas su mineralinės vatos užpildu - Korpusas: 100 mm storio plokštės, izoliuotos mineraline vata - Šildymo sistema: RIELLO dyzelinis degiklis modelis 40G20; šildymo galia 200.000 Kcal/val.; šilumokaitis iš 2 mm nerūdijančio plieno - Maksimali šiluminė galia: 200.000 Kcal/val., 1 komplektas - Stogas: 100 mm storio plokštės, izoliuotos mineraline vata - Valdymo sistema: Šildymo valdiklis, laiko nustatymas, gedimų indikacija, avarinio stabdymo jungiklis, veikimo valandų skaitiklis, temperatūros ribos reguliatorius, bendra veikimo laiko indikacija - Bendra galia: 6 kW - Viršutinė transportavimo sistema: 4 bėgiai; maksimali apkrova 400 kg kiekvienam bėgiui Gaminame krosnis pagal bet kokius matmenis. Įgyvendiname pilnus sprendimus su transportavimo traversomis, dažymo sienomis ir miltelinio dažymo pistoletais – vizualizacijos pridėtose nuotraukose.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 850 mm, bendras ilgis: 12 125 mm, bendras plotis: 5 150 mm, bendras svoris: 8 000 kg, garantijos trukmė: 12 mėnesiai, vidinis aukštis: 5 000 mm, vidinis ilgis: 12 000 mm, vidinis plotis: 5 000 mm, Įranga: apšvietimas, kabina, PAINT BOOTH 12x5x5M EZ-Series Model: Itodpfoxm U Exox Ab Nei - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL DATA: - External dimensions: 12,125 x 5,150 x 5,850 mm - Internal dimensions: 12,000 x 5,000 x 5,000 mm - Entry gates: 4,000 x 4,800 mm (2 units, four-leaf, with reinforced hinges) - Additionally, a BOX measuring 1,650 mm x 8,000 mm is to be considered – can be positioned on the left or right side. - Construction: galvanized steel frame structure - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame design prevents vibration and air surge effects from the main supply duct. Double roof design: - Outer upper layer - Inner truss structure with V600 ceiling filter Air circulation system: - Supply system: radial fans 7.5 kW – 2 units - Exhaust system: radial fans 7.5 kW – 2 units Air filtration system: - Pre-filter retains particles >10 μm - Ceiling filter retains particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil type 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-grade stainless steel - Heating time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the cabin roof - Insulated roof - Passage doors - Water wall - Colour to RAL catalogue - EX version (explosion-proof) available