Purškimo kabina 7,2x5,2m

ABC-Group

Būklė: naujas, Gamybos metai: 2026, The illustrative photos show implementations for the customer-specific 4x7 spray booth. The offer applies only to the spray booth without a preparation area (option to purchase a preparation zone upon customer request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three-winged) - Service door: 640x1800 mm - Structure: stainless steel - Heat exchanger: stainless steel Csdpfx Aor Ha Ehskkerf - Panels: filled with mineral wool - Total power: 16 kW - Fully grated flooring - Air supply system: jet turbine 4.0 kW – 2 units - Exhaust system: power turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED tubular lamps, 32 units - Side lights: LED panel 120x30 cm – 8 units Power: 48 W – each 1000 lumens - Burner: Riello 40 G20 95-213 kW - The booth is available in various colors

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 5 000 mm, bendras plotis: 3 500 mm, bendras aukštis: 2 950 mm, vidinis aukštis: 2 650 mm, vidinis ilgis: 4 900 mm, vidinis plotis: 3 400 mm, Įranga: kabina, Vehicle Spray Booth The vehicle spray booth is an essential piece of equipment for paint repair technology. It allows painting work to be carried out under safe and comfortable conditions while minimizing negative impacts on the surrounding area and the environment. Technical Data: - External dimensions: 5000 (+ air supply unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance gate: 3000 × 2600 mm (three-winged) - Service door: 700 × 2000 mm - Structure: made of sheet steel - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin wall construction: - Thickness: 50 mm - Filling: EPS polystyrene - Colour: white Cabin floor: - Cabin mounted directly on the floor/concrete slab Double ceiling: - Outer ceiling covering - Full-surface plenum above the entire ceiling for supply air Air exchange system: - Supply air system: - Jet turbine 4 kW – 2 units - Air capacity: 26,000 m³/h - Extract air system: - Jet turbine 5.5 kW – 1 unit - Air capacity: 18,000 m³/h Lighting: - 8 side lamps Cjdpfxjxnpczo Akkerf - Ceiling lighting: 24 LED fluorescent tubes Air heating system: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filter system: - Double-layer filter structure - High-performance air cleaning system with a filter efficiency of up to 99%

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Išsami specifikacija: - Vidiniai matmenys: 5500 × 1500 × 2300 mm (Ilgis × Plotis × Aukštis) - Išoriniai matmenys: 5700 × 1900 × 2700 mm (Ilgis × Plotis × Aukštis) - Įėjimo durys: Dviejų varstomų durų, 1700 × 2300 mm (Plotis × Aukštis) - Sienų plokštės: 100 mm storio, 950 mm pločio, liežuvėlio-griovelio konstrukcija; 0,5 mm plieno lakštas su mineralinės vatos užpildu - Korpusas: 100 mm storio plokštės, izoliuotos mineraline vata - Šildymo sistema: RIELLO dyzelinis degiklis modelis 40G20; šildymo galia 200.000 Kcal/val.; šilumokaitis iš 2 mm nerūdijančio plieno - Maksimali šiluminė galia: 200.000 Kcal/val., 1 komplektas - Stogas: 100 mm storio plokštės, izoliuotos mineraline vata - Valdymo sistema: Šildymo valdiklis, laiko nustatymas, gedimų indikacija, avarinio stabdymo jungiklis, veikimo valandų skaitiklis, temperatūros ribos reguliatorius, bendra veikimo laiko indikacija - Bendra galia: 6 kW - Viršutinė transportavimo sistema: 4 bėgiai; maksimali apkrova 400 kg kiekvienam bėgiui Gaminame krosnis pagal bet kokius matmenis. Codpfx Akjxna U Usksrf Įgyvendiname pilnus sprendimus su transportavimo traversomis, dažymo sienomis ir miltelinio dažymo pistoletais – vizualizacijos pridėtose nuotraukose.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 850 mm, bendras ilgis: 12 125 mm, bendras plotis: 5 150 mm, bendras svoris: 8 000 kg, garantijos trukmė: 12 mėnesiai, vidinis aukštis: 5 000 mm, vidinis ilgis: 12 000 mm, vidinis plotis: 5 000 mm, Įranga: apšvietimas, kabina, PAINT BOOTH 12x5x5M EZ-Series Model: Crodoxm U Exjpfx Akkof - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL DATA: - External dimensions: 12,125 x 5,150 x 5,850 mm - Internal dimensions: 12,000 x 5,000 x 5,000 mm - Entry gates: 4,000 x 4,800 mm (2 units, four-leaf, with reinforced hinges) - Additionally, a BOX measuring 1,650 mm x 8,000 mm is to be considered – can be positioned on the left or right side. - Construction: galvanized steel frame structure - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame design prevents vibration and air surge effects from the main supply duct. Double roof design: - Outer upper layer - Inner truss structure with V600 ceiling filter Air circulation system: - Supply system: radial fans 7.5 kW – 2 units - Exhaust system: radial fans 7.5 kW – 2 units Air filtration system: - Pre-filter retains particles >10 μm - Ceiling filter retains particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil type 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-grade stainless steel - Heating time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the cabin roof - Insulated roof - Passage doors - Water wall - Colour to RAL catalogue - EX version (explosion-proof) available

Gamybos metai: 2009, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 120P1109, OFFER 21407 Motorized tank rotating device with rail-mounted undercarriage Technical data: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per tank turning unit: 20,000 kg - Workpiece diameter approx.: 500 - 3,500 mm - Center distance of support rollers adjustable via trapezoidal spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-sided drive - Infinitely variable rotation speed control Csdpfx Akshcnhmekorf - Handheld remote control for forward and reverse - Drive: 400 V - Both units are mounted on rail undercarriages - Space requirement powered unit approx.: W 3,800 x H 1,150 x D 1,350 mm - Space requirement idler unit approx.: W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit approx.: 2,500 kg - Weight idler unit approx.: 1,800 kg

Būklė: naujas, Gamybos metai: 2026, - External dimensions: 8125 x 4650 x 4600 mm - Internal dimensions: 8000 x 4500 x 3800 mm Codpfxonbdlbj Akkjrf - Entrance gate: 4000 x 3800 mm (four-winged) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool filled - Total power: 22 kW - Seats: inside/outside (after prior roofing of the cabin by the customer, on their own initiative) - Floor: fully grated - Air supply system: Jet turbine 5.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 1 unit - Ceiling lights: cassettes with LED fluorescent lamps, 36 units - Side lights: LED panel 120x30cm – 12 units Output: 48 W – single piece 1000 lumens - Burner: Riello RG5S 160–310 kW - The cabin is available in various colors

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, 2018 m. pagamintų kryžminio pjovimo pjūklų optimizavimas. Šio WEINIG DIMTER Opticut S90 pjūklo skersmuo yra 500 mm, o didžiausias pjovimo aukštis - 120 mm. Juo galima pjauti nuo 400 iki 6300 mm ilgio ir nuo 20 iki 300 mm pločio įvesties ilgius. Jei norite gauti aukštos kokybės pjovimo galimybes, apsvarstykite mūsų parduodamas WEINIG DIMTER Opticut S90 stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Pjūklo diskas • Skersmuo: 500 mm Csdpfx Aksylmmmjkorf • Skylė: Braižas: 30 mm • Reguliuojamas pjūklo greitis: 40-100 % dažnio keitikliu • Ruošinio talpa • Įvesties ilgis (min/max): 400-6 300 mm • Plotis (min/max): 20-300 mm • Storis (min/max): 10-120 mm • Didžiausias pjovimo aukštis: 120 mm • Mažiausias skerspjūvis: 20 x 10 mm • Didžiausias skerspjūvis 1: 215 x 120 mm • Didžiausias skerspjūvis 2: 300 x 40 mm • Leistinas medienos kreivumas: ne daugiau kaip 2 mm/m arba 8 mm per visą ilgį • Stalo nuolydis: 10° • Judėjimas ir tikslumas • Pozicionavimo greitis (atbulinė eiga): maks. apie 180 m/min • Pozicionavimo greitis (eiga pirmyn): ne daugiau kaip apie 60 m/min. • Pozicionavimo tikslumas: +/- 0,1 mm • Varikliai ir galia • Stūmiklio variklio galia: 5,1 kW • Pjūklo variklio galia: 7,5 kW • Bendra elektros apkrova: apie 15 kW • Valdymas ir sąsaja • Valdymo blokas: "OptiCom Pro" su 18,5 colių jutikliniu ekranu • Ekrano skiriamoji geba: 1366 x 768 pikselių • Apsaugos klasė (priekyje): IP65 • Sąsaja: USB prievadas ir Ethernet tinklo jungtis • Duomenų formatas: CSV (ASCII), skirtas importuoti ir eksportuoti • Įrankiai ir aplinka • Įtampa: 400 V / 50 Hz • Darbinis slėgis: 6-8 bar (min.) • Oro sąnaudos: apie 250 NL/min • Išsiurbimo jungtis: 125 mm skersmuo • Reikalaujamas ištraukimo našumas: greitis apie 30 m/s; tūris apie 1300 m³/h • Triukšmo lygis (tuščiąja eiga): ≤ 85 dBA

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operating side: left - Gun drive: single design - Dry extraction Credpfx Asv N D Ewjkkef - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed: 1.5 - 7 m/min - PLC control with touchscreen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~ 7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide an offer for the installation and commissioning of the system, as well as training of your employees. Upon request, we can also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Loading, unloading, drive-on, entry, mobile ramp 10-ton ramp, 2 m width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 mm - Ramp railings on both sides - Ramp rollers for repositioning the ramp - Central ramp handle for forklift transport - Adjustable slope and ramp flap height - Movable ramp components with grease points - Ramp winch also included - Custom ramp dimensions available for an additional charge - Electrically powered height adjustment available (optional) - ! ATTENTION: CHOOSE THE TAPER WIDTH BASED ON THE MINIMUM USABLE NOTCH! ✅ Entrance Grating: Galvanized grating with anti-slip grooves. Safe and stable surface. Forklift and pedestrian traffic have the best possible grip and stability. The grating is galvanized and can be dismantled. ✅ Forklift Handle – installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in any direction. The specially designed handle enables maneuvering even in confined spaces. ✅ Chain for connection to a truck, wagon, or fixed warehouse ramp: Robust steel chain is another advantage of our ramp, providing extra security to prevent shifting during loading and unloading. ✅ Sturdy Side Railings: Protective railings with the option to remove and install a frame/roof (roof is optional). ✅ Electric ramp height control: Crodjpk Auqjpfx Akkof Smooth electro-hydraulic drive with high-performance pump. The pump requires 230V and can therefore be operated from a standard socket. ✅ Dual-action hand pump: Hydraulic pump for height adjustment in case there is no connection to the electro-hydraulic power supply – double-sided lift. This is an excellent solution for operations under all conditions. ⭐️ We offer the following versions: ⭐️ - Drive-on ramp widths in 1900 – 2000 mm, 2150 mm and 2500 mm PREMIUM. - Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons PREMIUM. - Thickness of drive-on gratings 3 – 5 cm. - Colors: red, blue, and black. - Mobile ramp with tarpaulin.

Būklė: naudotas, Gamybos metai: 1998, Naudota mašina Pagaminimo metai: 1998 Būklė: Prižiūrėta (mokyklinė mašina) Komplektacija: Cedpfxjxqihcj Akkjrf Frezavimo agregatas 5 kW Verpstės kotas cilindrinis 25 mm su kabliu raktu Gręžimo agregatas 1,5 kW, 19 velenų Kryžminė galva su 4 gręžimo velenais Pjūklo agregatas gali būti pasukamas iš X į Y Šviesos barjeras priekyje Kompiuteris naujas 2015 m. Operacinė sistema Windows 98 Weeke programinė įranga Woodwop 4.0 Techniniai duomenys: Darbo eiga X: 3455 mm Darbo eiga Y: 1480 mm Darbo eiga Z: 260 mm Išoriniai matmenys: Ilgis: apie 6115 mm Plotis: apie 3660 mm Vieta: Röllbach Galimybė: iš karto