Mütek Mfp pirkti naudotą (82)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Bjdjd H R Sxepfx Aa Dowr Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Bsdpsx Af Rdefx Aa Dowr Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Bodsd N Dnhjpfx Aa Dowr Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Bwjdpfxoh S H T Ue Aa Dsr Throughput highly dependent on screen and input material: - up to 60 kg/h when processing EPS with a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW – 400 Volt Robust steel construction, hardened cutting knives, screen with interchangeable inserts, available perforations (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive, supplied with star-delta switch, overload protection, and 8 m power cable, plug-ready. Discharge spout: 150 mm, optionally suitable for plastic or grain pipes, blowing distance approx. 12 m. Chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires. Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Bedorb D Nspfx Aa Djwr Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Airflow 1850 m³/h / 400 V

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Bodpfxjffh Ats Aa Djwr Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result. Bwjdpfx Aaefmqq Es Djr

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Bjdpfx Aajd Su Hxs Dswr Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% Bjdpfx Aodwktksa Dswr - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Bwodpfx Aajd Db N Ij Djr Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Bwsded Dgw Ujpfx Aa Der Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for re-shredding wood chips. Further details can be provided after testing with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for diverse shredding tasks across various applications. For example, defective parts and sprues arising at injection moulding machines need to be reprocessed. In blow moulding operations, besides rejects, there are also waste pieces or startup hoses. Materials that can be processed include, among others, blow moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the cutting chamber of the granulator. The rotor inside is equipped with cutting knives. The material is shredded between the rotating blades and the stationary knives until it reaches a defined granulate size and passes through the screen beneath the rotor. *Optionally, the processed material can then be conveyed pneumatically to Big Bags, silos, or other containers. The price applies only to the granulator system as shown in Image 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput: up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Size reduction of PE 1000 plastic Bjdjd N Dn Depfx Aa Dewr Input material: approx. 40 mm chip length Final granulate size: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ For G 30 wood chip re-shredding, significantly higher throughputs are possible – up to max. 400 kg/h with a 10 mm screen. *Metered feed, e.g. via conveyor belt or auger. Details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Exhaust connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available Price per screen: €390 Price for spare knife set: €679 Suitable for, e.g.: - All types of plastic waste Materials such as HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optionally with matching extraction/transport system --- The following information is required for machine configuration: - Length x Width x Height of input material? - Screen size required (to what granulate size)? - Desired hourly throughput in kg? - Wall thickness in mm? - Material description Photos may also be helpful.

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Reikalavimai žaliavai: Bjdpfx Aaewzarce Dowr - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: geras (naudotas), Refurbished Used Machine *Options available at extra cost, see below with full 1-year warranty Available for delivery approx. 16 weeks after order Technical Specifications: Throughput capacity up to max. 1200 kg/h depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter 75 mm including 2 m press channel Main drive motor 45 kW Feed screw geared motor 2 x 2.2 kW Compactor screw 2 x 5.5 kW Distributor screw 2.2 kW Hydraulic pump motor 0.37 kW Total connected load 65 kW Control panel with plain text display for operational states and load indicator for main drive and feed screws PLC control Siemens S7/300 with hour meter in the control cabinet Machine has CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for one press of type MAP 1200) - Buffer silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT - Temperature control unit for press tools For maintaining temperature to achieve optimal briquette quality. Temperature control for pump, cooler, fan, pressostat Ready-wired for operation – mandatory for use including corresponding control system €7,850 net - Guillotine for briquette length cutting Compressed air connection required on site Bwsdpfx Ae E Dquoa Dor €6,940 net plus VAT - Conveyor line / cooling section (Nominal value: 4x2m) per 2 meters €990 net Assembly / Commissioning (Nominal value per press approx. 2-3 days on site) Charged according to effort based on evidence, invoiced separately. The following rates apply: Service technician/mechatronics technician per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Per diem allowance per fitter per day: depending on country Per car/van and travel kilometer: €0.98 / km Arrival and accommodation expenses reimbursed by invoice or by fixed rate at the buyer's expense. Test with customer's own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net ---- Raw material requirements: - The (absolute dry) moisture content must be between a minimum of 6 and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room, minimum +5°C - Feedstock must be free of metals and mineral contaminants. Damage to the press tools and/or increased wear may otherwise occur.

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths Bsdpfx Aetqfhxsa Dewr The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Installation example 1: Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% Bwjdped E R D Sefx Aa Dsr - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) Bodpsdv Eu Hofx Aa Dowr - Special K-rotor bearing + €3,480 (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Bwodpfegmfa Aex Aa Dsr Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Gamybos metai: 2024, būklė: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net Bwjdjff Sbiepfx Aa Der - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Bwodpfxsx Tfdho Aa Djr Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Būklė: naudotas, Konvejeris, juostinis konvejeris, MFP Fördertechnik juostos konvejeris Pagaminimo metai: apie 2015 Naudojamas ilgis: 2500 mm Juostos plotis: 250 mm Juostos ilgis: apie 5200 mm Rėmo profilio aukštis: 50 mm Grįžtamojo veleno skersmuo: 20 mm Juostos greitis: apie 5 m/min. iki 40 m/min. Bwodpfsxf Uqlex Aa Djr Konvejerio aukštis: apie 1000 mm Variklio galia: 140 W Tinklo įtampa: 230 V, 50 Hz. - Nenutrūkstamas juostos greičio reguliavimas per potenciometrą ant ROFRE dažnio keitiklio, tipas 897 - Dešinė/kairė važiavimo kryptis - Juostos pavara per INTERROLL vamzdinį variklį - Tvirta plieninė-ketinio konstrukcija su uždengta plieno plokšte po konvejerio juosta - 1 vnt. aukščio reguliuojamas HAACON rėmas su rankine svirtimi, konvejerio aukštis apie 1000–1200 mm - HAACON rėmas sumontuotas ant plieno plokštės ilgis 500 mm x plotis 450 mm x storis 20 mm - 1 vnt. fiksuota atraminė koja be aukščio reguliavimo, naudojama kaip transportavimo atrama - Visiškai mobilus ant fiksuotų ratukų Bendri matmenys I x P x A: 2570 x 400 x 1050 mm Svoris: 115 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 220 V, bendras plotis: 216 mm, bendras ilgis: 76 mm, bendras aukštis: 127 mm, rašalo kasečių skaičius: 4, popieriaus svoris (min.): 45 g/m², didžiausias popieriaus svoris: 220 g/m², popieriaus plotis (maks.): 585 mm, spalvų kanalai: 4, popieriaus aukštis (maks.): 710 mm, rezoliucija (maks.): 1 200 DPI (taškų colyje), reikalingas aukštis: 356 mm, Įranga: automatinis dvikryptis spausdinimas, Siūlome tris puikios būklės daugiafunkcius įrenginius (spausdintuvą, kopijavimo aparatą, skaitytuvą): HP Color LaserJet Managed MFP E87750dn + 2000 lapų talpos dėklas – (išspausdinta apie 200 tūkst. lapų) – 350 Eurų. HP Color LaserJet Managed Flow MFP E67660Z + dėklas – (išspausdinta apie 100 tūkst. lapų) – 250 Eurų. Bodpfjzqmutex Aa Dewr HP LaserJet Managed MFP E62655dn + dėklas – (išspausdinta apie 100 tūkst. lapų) – 200 Eurų. Įrenginiai yra visiškai veikiantys. Tiesiai fotografuotos nuotraukos bus prieinamos rugsėjį, taip pat rugsėjį bus galima juos atsiimti. * Didesniam kiekiui taikoma nuolaida.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 154 kg, įėjimo įtampa: 220 V, bendras plotis: 660 mm, bendras ilgis: 1 500 mm, bendras aukštis: 1 310 mm, HP DesignJet XL 3600 MFP – Bendras išspausdintų plotų skaičius: 23 105 m² Bodpfxozpyfij Aa Dewr – Komplekte yra kalibravimo lapas – „Viskas viename“ modelis – Komplekte yra „PostScript“ parinktis Labai didelis našumas dėl greito pirmojo atspausdinimo ir didelio spausdinimo greičio. 📐 Idealiai tinka CAD, GIS ir statybų projektams, užtikrina ryškias linijas ir tikslias spalvas. 📄 Automatinis popieriaus ritinio įkėlimas su integruotu atspausdintų dokumentų surinkimo įrenginiu. 📱 Galimybė tiesiogiai spausdinti iš USB, tinklo, el. pašto ir mobiliųjų įrenginių. 🖥️ 15 colių jutiklinis ekranas, užtikrinantis paprastą valdymą. 🔒 Išplėstinė sauga, įskaitant šifruotą atmintį ir tinklo saugumą. 📦 Tinka dideliems spausdinimo apimčių poreikiams, todėl populiarus reprodukcijos skyriuose ir techniniuose projektavimo biuruose. Ši mašina buvo patikrinta ir išsamiai išbandyta mūsų specializuotos techninės priežiūros tarnybos. Jei norite gauti daugiau informacijos, nedvejodami susisiekite su mumis. Galimas pristatymas visame pasaulyje.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14800061, skaitiklio rodmuo (juoda): 652, Šiame pasiūlyme įsigysite beveik naują didelio formato spausdinimo sistemą / ploterį „KIP 660 MFP“. Pardavimo objektas: 1 vnt. „KIP 660 MFP“, įskaitant skaitytuvą. Rodmenys: Bendras: apytiksliai 652 m². Būklė: Šis pasiūlymas yra dėl naudoto įrenginio, kuriame gali būti nedidelių naudojimo žymių (smulkių įbrėžimų arba pageltimų). Įrenginys buvo patikrintas, ar veikia. Bandomasis spaudinys matomas nuotraukoje. Pakavimas ir siuntimas: Galite atvykti peržiūrėti įrenginio mūsų darbo valandomis. Norėdami tai padaryti, susitarkite dėl susitikimo! Galimas patvarus pakavimas ir siuntimas į bet kurią pasaulio vietą pagal užklausą! Bwedpezmpaqofx Aa Dor Prieš siuntimą arba atidavimą, užregistruosime įrenginio veikimo testą vaizdo įraše. Jei norite gauti daugiau informacijos, galite susisiekti su mumis asmeniškai.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Šiame pasiūlyme įsigysite naudotą kopijavimo aparatą „Xerox AltaLink C8255 MFP“. Pardavimo objektas: 1 vnt. „Xerox AltaLink C8255 MFP“ Rodmenys: Juoda spalva, iš viso: apie 1 795 atspaudų Spalvota, iš viso: apie 3 634 atspaudai Iš viso: apie 5 429 atspaudai Būklė: Šis pasiūlymas skirtas naudotam įrenginiui, kuris gali turėti naudojimo žymių (nedidelių įbrėžimų ar pageltimų). Bwedpfx Aajzb Akye Dsr Įrenginys buvo išbandytas ir veikia. Pakuotė ir siuntimas: Jūs galite atvykti į mūsų įmonę darbo valandomis ir apžiūrėti įrenginį. Prašome susitarti dėl susitikimo! Galima pasiūlyti patvarią pakuotę ir pristatymą į bet kurį pasaulio kampelį, atsižvelgiant į jūsų pageidavimus! Norėdami gauti daugiau informacijos, galite susisiekti su mumis asmeniškai.